What did you do to/in your 5th Gen today?!

[jimster716]

After sitting in my [MENTION=82791]Relentless[/MENTION] Fabrication Stingray bumper for months, finally wired up my Smittybilt X2o 10K winch. Because of the factory hard cooler lines, I couldn't mount the solenoid control box on the winch so I had to relocate it. I ordered three 7' 0/2ga marine cable so I could run the lines from the winch to the controller behind the battery area.

I still need to mount the box into the existing M8 bolt holes on the body but the 0/2ga cables are so thick and stiff that the solenoid isn't bouncing around but isn't making things easy to mount the box. But everything works and I was able to wind up the synthetic line.

 

[LawnDart]

Took the truck in for an alignment today. Simply put, Long Travel alignments can be a pain. Took 2.5 hours even from a shop that specializes in lifted trucks.

When we lifted the driver side in November it didn't do much, but when we leveled the truck out with the new rear springs in February we got things dialed in the rear but induced some positive camber on the passenger side, and a bit of negative camber on the driver side.

Anyways, done and done:

 

[TRUSTYAXE]

Toytec 2/1.5 kit and NRG 285's.

 

[Duke562]

What lift is that looks taller than only 2 in


Sent from my iPhone using Tapatalk

 

[jimster716]

Got the GOBI ladder installed! SIMPLE install.

Ummm...that building behind you seems to have a split personality. LOL

 

[deepsoutht4r]

carista obdii dongle

i used the carista dongle and app to change some settings on my t4r today like the annoying beep when locking/unlocking.
i wish it would have a few other options like tire height and putting down the rear window with a long press on the remote, maybe in future those options will be available.

have a great day!

 

[mgreen6616]

Mounted up my Yakima bars and made some mounts to finally attach my ARB awning.

 

[Ray Dunakin]

I took Megaweapon in for a fill up and wash, and inadvertently "washed" the second row of seats too. Apparently
as I leaned out the driver's side window to punch in the code for the car wash, I must have pressed slightly on
one of the buttons, causing the rear side window to come down about 2". Never knew anything was amiss until
the end when I went through the blow dryer and felt a sudden draft.

.

 

[TRDPRO]

Feeling out of place today

 

[SeniorDj]

Installed this little fella after painting and clear coating with the touch up pen almost a dozen rock chips.

Sent from my SM-G935W8 using Tapatalk

 

[SeniorDj]

Feeling out of place today

Never hide who you are! Lol is that the front runner or the k9 rack?! Love the ladder

Sent from my SM-G935W8 using Tapatalk

 

[TRDPRO]

Never hide who you are! Lol is that the front runner or the k9 rack?! Love the ladder

Sent from my SM-G935W8 using Tapatalk

:cheers:

Baja low profile Rack and Ladder

 

[noclue90]

Interior/Mirror LED swap. Looks much better and function is obviously improved.


Sent from my iPhone using Tapatalk

 

[SeniorDj]

:cheers:

Baja low profile Rack and Ladder

Flat enough up top for a RTT?

Sent from my SM-G935W8 using Tapatalk

 

[DeepSea]

Installed Kicker Hideaway Subwoofer under driver seat. It dramatically improved the OEM audio. Bought on Amazon: https://www.amazon.com/gp/product/B007LQWSYC/ref=od_aui_detailpages00?ie=UTF8&psc=1

 

[Jhalko]

I took Megaweapon in for a fill up and wash, and inadvertently "washed" the second row of seats too. Apparently as I leaned out the driver's side window to punch in the code for the car wash, I must have pressed slightly on one of the buttons, causing the rear side window to come down about 2". Never knew anything was amiss until the end when I went through the blow dryer and felt a sudden draft.

.

Hopefully you were able to laugh at the situation. I mean it still blows, literally, but it could have been worse. The window could have been ALL the way down!

:fear:

 

[Concon40]

New sneakers.

Mounted the ridge grappler 265/70r17 and installed the toytec 2"/2"w/HD 2.0 in the rear.

I decided to stay with stock size tires due to the 7" trd pro rims. Next tire change will see new wheels and 285's but I'm happy with the look of the stock size with the lift.

The truck rides so much better with the HD springs supporting the weight of the SSO bumper.

I have never loved a vehicle as much as this one.

 

[Concon40]

One more

Different angle

 

[Simpleman74]

I decided to stay with stock size tires due to the 7" trd pro rims.

nice rig.... 285s and even better 275s will fit on those wheels just fine

 

[Concon40]

nice rig.... 285s and even better 275s will fit on those wheels just fine

Yeah... I'm kicking myself a little for not doing the 285's but.... what is done is done and I like it enough. Next time...