What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Fun stuff today...great to meet you and the wifeyMessed around with the driver's side A-pillar... special thanks goes to [MENTION=154554]Jasontamu[/MENTION] and his feat of engineering!!!
Sent from my iPhone using Tapatalk
...still working out all aspects of this mod then I'll support the community.
J
Sent from my LG-D850 using Tapatalk
Had some time at work so I decided to CAD up and 3D print myself a phone holder that fits in that useless coin tray. Had to actually draw the TRD. Looked to plain without it. I also had time to do the Antman flashlight mod for my 1000 lumen Surefire P3X Fury in the door tray.
Sent from my iPhone using Tapatalk
I like that mod!
I did similar to door panels of my other vehicles using basic flash light bicycle holders from eBay.
I'll have to do this to the 4runner..
J
Sent from my LG-D850 using Tapatalk
JayToo
New member
Messed around with the driver's side A-pillar... special thanks goes to [MENTION=154554]Jasontamu[/MENTION] and his feat of engineering!!!
Sent from my iPhone using Tapatalk
Looks great, like it belongs there. I was going to comment on Insta but I wasn't 100% sure that was a mod, and I was too lazy to go down and check my own truck in the parking lot [emoji23]
Sent from my iPhone using Tapatalk
007Tacoma
New member
Had some time at work so I decided to CAD up and 3D print myself a phone holder that fits in that useless coin tray. Had to actually draw the TRD. Looked to plain without it.
:jaw:
And with a magpul case. So, since you have the same dimensions, looking to sell a few?
Seriously.
007Tacoma
New member
Yep! [MENTION=154554]Jasontamu[/MENTION] is working on perfecting his bracket for aesthetics, but this prototype version he installed on my 4Runner is 100% functional!!!
...plus now I have one less excuse to do a lift...:spy:
:reddance::frog:
A10MileHusker
New member
Wow, looks great! Would love one if you are willing to make another :bigok:
HskyRunner
New member
Had some time at work so I decided to CAD up and 3D print myself a phone holder that fits in that useless coin tray. Had to actually draw the TRD. Looked to plain without it. I also had time to do the Antman flashlight mod for my 1000 lumen Surefire P3X Fury in the door tray.
[/IMG]
If you don't want to make more would you be willing to share the file for it? I'd be interested in having a friend print one up. Looks awesome dude!
Finished up my drawers tonight. Turned out pretty much exactly like i wanted. It was a fun project and learned a bit along the way!
Normal Setup:
Any guesses what's inside the OD Green bag? ^^
Camping/Tailgating Setup:
When I put the grill etc in the drawer, the contents from my normal setup go nicely in the nook to the right.
Sent from my iPhone using Tapatalk
Normal Setup:
Any guesses what's inside the OD Green bag? ^^
Camping/Tailgating Setup:
When I put the grill etc in the drawer, the contents from my normal setup go nicely in the nook to the right.
Sent from my iPhone using Tapatalk
FrenchToasty
New member
Friggin Idiot
Senior Member
Had some time at work so I decided to CAD up and 3D print myself a phone holder that fits in that useless coin tray. Had to actually draw the TRD. Looked to plain without it.
Any chance you might be able to twist the head about 45-60 degrees left so it points at the driver? Also maybe create a center recess for a wireless charging pad?
Last edited:
007Tacoma
New member
YES my iPhone 8 needs... wait... the iPhone 8 is not out yet, is it..? ...I am really not good at time travel... or forums.
Disclaimer: my sarcastic/joking/incoherent comments should not degrade or diminish the validity of this request.
Make it so.
Cheers!
cheetahgeek
New member
Gen5 2016 Shifting issues
No joy as they say. Sat at the Flagstaff dealership while they ran the computer diagnostic and when for a test drive. No codes flagged. Of course they didn't drive it in the conditions the issue occurs. Left with the impression they had no idea what to do. One of the advisors thinks the torque converter is the issue. Told me to drive it hard. When it shifts hard at speed and if it bucks again then he says he'd push it hard.
Since then I went to Sedona AZ, and then back to Flagstaff for the last day of the Overland Expo. Yesterday I drove back up to Park City Utah via Grand Canyon and Bryce Canyon.
Driving on 89A N of the Bryce Canyon area I had no passing power. I'd get stuck behind a car going 45 and couldn't get the 4Runner going fast enough to pass in the passing lane. Tried both D and S mode. It'd rev up but couldn't seem to shift up. I'm wondering if its an issue with shift points or maybe some funky OD versus ECO mode setting.
Its getting worse. Today it shifted slowly then shifted down jostling me around while in traffic. It jumped 4000 rpm and back to 2000 when shifting between 4th and 5th with speed changes between 60 and 75 mph.
I'm getting my super sliders installed tomorrow. Bolting on only cause I"m not sure this vehicle belongs in my garage.
If anyone has insights to how to fix the issue please post! Would appreciate your 2cents!
No joy as they say. Sat at the Flagstaff dealership while they ran the computer diagnostic and when for a test drive. No codes flagged. Of course they didn't drive it in the conditions the issue occurs. Left with the impression they had no idea what to do. One of the advisors thinks the torque converter is the issue. Told me to drive it hard. When it shifts hard at speed and if it bucks again then he says he'd push it hard.
Since then I went to Sedona AZ, and then back to Flagstaff for the last day of the Overland Expo. Yesterday I drove back up to Park City Utah via Grand Canyon and Bryce Canyon.
Driving on 89A N of the Bryce Canyon area I had no passing power. I'd get stuck behind a car going 45 and couldn't get the 4Runner going fast enough to pass in the passing lane. Tried both D and S mode. It'd rev up but couldn't seem to shift up. I'm wondering if its an issue with shift points or maybe some funky OD versus ECO mode setting.
Its getting worse. Today it shifted slowly then shifted down jostling me around while in traffic. It jumped 4000 rpm and back to 2000 when shifting between 4th and 5th with speed changes between 60 and 75 mph.
I'm getting my super sliders installed tomorrow. Bolting on only cause I"m not sure this vehicle belongs in my garage.
If anyone has insights to how to fix the issue please post! Would appreciate your 2cents!
cheetahgeek
New member
Shifting Issues
Well... They've let me down. Any thoughts on how to resolve the issue? Its only good for driving to the grocery store as is.
Well... They've let me down. Any thoughts on how to resolve the issue? Its only good for driving to the grocery store as is.
Good guess but it is a Keltec Sub2000 Gen 2 with Micro Dot and 4 33rd mags!
Sent from my iPhone using Tapatalk
jahdai42
Member
Had some time at work so I decided to CAD up and 3D print myself a phone holder that fits in that useless coin tray. Had to actually draw the TRD. Looked to plain without it. I also had time to do the Antman flashlight mod for my 1000 lumen Surefire P3X Fury in the door tray.
Sent from my iPhone using Tapatalk
Very nice, do you have the file shared anywhere? Which 3D printer are you using, I like the smooth finish?
Similar threads
