What did you do to/in your 5th Gen today?!

"Installed" the Toyota logo puddle lights--hilariously cheesey! I'm sure my father in law with the $90K Navigator will love them.

My wife gave me a "what are those?" when she got in the truck last night-totally worth 12 bucks.
 
Last edited:
Thanks for the user name, I just ordered two of these for my buddy and I. Mine is white and I was thinking about plasti-dip on the ends behind the short valence thing. Thoughts in this? Maybe just tape?

Cool! You're going to love it! Watch some youtube videos to see instructions because there aren't any included. I broke a few of the tabs that hold the radiator cover on. The videos I saw showed how to take them off, but not back on -- They may be self explanatory, but I had never taken them off so didn't know.

As far as the gap goes -- another forum member mentioned that the stock TRD also has the same gap -- so, I probably would worry about it? :)
 
Put the N-Fab steps on my Nightshade. Upgraded to HID and LED Highs and Fogs.

We went to the Detroit Auto with the wife and kido yesterday. Was a blast. Saw lots of cool new stuff for the wife, Hyundai Palisade was her favorite. They had my exact same Nightshade 4Runner at the Toyota exhibit. Stopped to get prime rib at the Whitehouse Inn, YUM. Then drove 3 hours home in a crappy snow storm. 4Runner did brilliantly. The factory Yokahmoa tires did great. Very impressed with this vehicle. Glad I upgraded the lights! Have 17" TRD Pro wheels that I'm waiting on tires for more fun in the snow.

Pic this morning from the aftermath of last nights trip.

KWiJnGx.jpg
 
Damn!! I have a black ORP, and have been on the fence about ceramic coating. Those pics pretty much sealed the deal for me ☝️

That looks fantastic--DIY or did you have someone else do it? Pricing around here is all over the place from $600 to $1700. Or 40 bucks or so from amazon....
Hey guys, Thanks. I purchased my Pro in early September last year. I noticed fine scratches all over the car and found out from my local detailer that this is common due to poor prep and washing by the dealers. Todays clear coats and paint are much softer water based, eco-friendly types, than years past. My 2001 black 4Runner had a much tougher clear and better paint and polished up great even after 17 years. So, I found a Ceramic Pro detailer and they did the color correction and polishing prior to applying the 5 year silver edition plan. It was discounted from $1700 to $1299 when I had it done in October. I demanded some money back from the dealership and they sent me a check for $500. The color and paint correction is the key, especially on dark colors. It was in the shop for 4 days. New buyers of any cars should check the quality of the paint prior to taking it off the lot. Time will tell if this is worth it. So far, absolutely. BTW, they did all the wheels, windshield and all the plastic parts. Everything except the side windows.
 

Attachments

  • 029FBC57-A7D5-460F-888F-D8061CE60FDB.jpg
    029FBC57-A7D5-460F-888F-D8061CE60FDB.jpg
    147.6 KB · Views: 1,372
Last edited:
RCI front, transmission, transfer case skids, and gas tank skids installed.

It was a great day for wrenching in that I only sheered one bolt on the RCI skid plates. SOB. Becoming much too proficient in backing out sheered bolt heads.

Although the fitment was perfect the bolts are very weak with this skid kit.



Sent from my iPhone using Tapatalk
 
Although the fitment was perfect the bolts are very weak with this skid kit.

Are they using Stainless Steel bolts with the kit? Such a wide gap in SS quality now days. The Chinese made crap is so soft. I'd much rather a good quality Grade 8 bolts and I'll just deal with a little surface rust.
 
floor jack, oem jack, spring compressors, bloody knuckles, and 0 help from my boy Bu to get these bump stops in. also, finally had enough of the hard-to-reach upper rear shock & sway bar nut situation.
 

Attachments

  • IMG_0567.jpg
    IMG_0567.jpg
    133.2 KB · Views: 1,259
  • IMG_0566.jpg
    IMG_0566.jpg
    134 KB · Views: 1,264
  • IMG_0568.jpg
    IMG_0568.jpg
    130.1 KB · Views: 1,250
  • IMG_0564.jpg
    IMG_0564.jpg
    131.8 KB · Views: 1,287
Last edited:
Wired dedicated power to rear cargo area and install a CFX40
 

Attachments

  • thumbnail_IMG_7136.jpg
    thumbnail_IMG_7136.jpg
    127.5 KB · Views: 1,080
  • thumbnail_IMG_7137.jpg
    thumbnail_IMG_7137.jpg
    139.2 KB · Views: 1,103
  • thumbnail_IMG_7138.jpg
    thumbnail_IMG_7138.jpg
    102.8 KB · Views: 1,083
Interior in my 2010 sr5 freshened up with carbon fiber wrap.

I know a good person if you need any custom interior wrap done in raleigh Durham NC



c3f3eb6162feea68fc16c9f0cbd87ebc.jpg


90d7c18e90dbaf5e96484a983f65123a.jpg


b9568c26ec83a06ec36b26d4e4c28bb8.jpg



Sent from my iPhone using Tapatalk
 
Learned a good lesson over the weekend... I wanted to wash the truck as its been the first dry weekend in a good while and also install the ARB Differential Breather. For one reason or another I decided to wash first without realizing the end result of a soaking wet working surface to install the breather.... Guess it'll have to wait for another weekend.

However I did de-badge the C-Pillar. I'm considering relocating one of the TRD Off Road badges to the rear hatch and painting black, similar to the Pro.
 
Interior

Interior in my 2010 sr5 freshened up with carbon fiber wrap.

I know a good person if you need any custom interior wrap done in raleigh Durham NC


Sent from my iPhone using Tapatalk

DOPE MAN! LOOKS AWESOME!

I just had a guy hydrodip mine. Still waiting for it to arrive but I'm thinking I need to do the rest of the interior now!

1.JPG

2.JPG

3.jpg
 

Attachments

  • 1.JPG
    1.JPG
    80.7 KB · Views: 763
  • 2.JPG
    2.JPG
    78.4 KB · Views: 758
  • 3.jpg
    3.jpg
    114.2 KB · Views: 764
After a 26 hour drive moving from Wisconsin to Arizona I went on a little adventure in Apache Junction, AZ. Man have I missed the west!
 

Attachments

  • Reks _1.jpg
    Reks _1.jpg
    137.2 KB · Views: 996
  • Reks _2.jpg
    Reks _2.jpg
    137.5 KB · Views: 986
  • Reks .jpg
    Reks .jpg
    143.3 KB · Views: 967

Members online

Forum statistics

Threads
278,317
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Trending content

Back
Top