GX4SEVEND
New member
Install wasn’t too difficult but I will say the template they give you is not correct. The holes were off towards the passenger door. So underneath on the fender is ugly but oh well. I will get a shot from the front shortly
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Install wasn’t too difficult but I will say the template they give you is not correct. The holes were off towards the passenger door. So underneath on the fender is ugly but oh well. I will get a shot from the front shortly
sqrt(2)^4Runner
New member
This is a neat idea. I sometimes wonder if CAD design would slow down or speed up projects like this.
spoonmectr
New member
Hey all
New to me, 2014 SR5 and new to the forum. Been busy with all the great info on here. So far Bilstein 5100 front and rear, front @1.75. New pads & rotors, Jesse’s tail gate mod. BFG 275-70-17 . Removed 3rd row seats and will start on a new floor. Put some Matt black automotive wrap on top of the head and tail lights, Arizona sun isn’t nice to plastic, and made a new friend in the desert .
8A83FF6C-0F1C-44F7-9532-34141CE7D50C by
DEFA2B97-A148-4CA6-9438-0A0F869A9BC4[/url
[url=https://flic.kr/p/2eHq5Lq]
9B14405A-A79A-43B2-A50E-63C36EF279CC by
28A146FE-6036-47E1-B7ED-2A67DED6CAEF by
C25F3466-DB39-4526-8E93-8C86B7F6DAD5 by
D9A6E789-8220-4F8E-B49A-A7473C93FB76[/url
[url=https://flic.kr/p/S9Bbnc]
38803557-4163-4DAC-AE29-0FF8BACE448D b
New to me, 2014 SR5 and new to the forum. Been busy with all the great info on here. So far Bilstein 5100 front and rear, front @1.75. New pads & rotors, Jesse’s tail gate mod. BFG 275-70-17 . Removed 3rd row seats and will start on a new floor. Put some Matt black automotive wrap on top of the head and tail lights, Arizona sun isn’t nice to plastic, and made a new friend in the desert .
8A83FF6C-0F1C-44F7-9532-34141CE7D50C byDEFA2B97-A148-4CA6-9438-0A0F869A9BC4[/url[url=https://flic.kr/p/2eHq5Lq]
9B14405A-A79A-43B2-A50E-63C36EF279CC by28A146FE-6036-47E1-B7ED-2A67DED6CAEF byC25F3466-DB39-4526-8E93-8C86B7F6DAD5 byD9A6E789-8220-4F8E-B49A-A7473C93FB76[/url[url=https://flic.kr/p/S9Bbnc]
38803557-4163-4DAC-AE29-0FF8BACE448D bsqrt(2)^4Runner
New member
What is the purpose of the automotive wrap? Is it mostly aesthetic, or does it reduce glare while driving with the headlights on? Or, is it something else?:thumb:
Teamoatmealpie
New member
Shade for the turn signals. AZ sun is no joke, it'll turn plastic brittle in no time.
Is that a Toyota or after market intake? Looks great, any performance gains?
Wallyg
New member
Yes. Takes about one minute to remove/uninstall.
They just looked crappy on top so that was my solution and I like the way in looks.
sqrt(2)^4Runner
New member
That's a thought.
sqrt(2)^4Runner
New member
It does add a nice accent. I am actually surprised I don't see more people doing this.
spoonmectr
New member
Thanks man. Its the factory TRD cold air intake. Yea the gains are noticeable. I would guess a few HP and improved throttle reaponse
HurricanePDX
New member
I debagged the pillars awhile back but held onto a set to put it on the rear hatch. Plastidipped that and the 4Runner logo in Anthracite Grey, trying to match the front on the heritage grill, comes out a bit darker but close enough for now. Also dipped the valences to black, glad to have that ugly silver gone
Magnetic-T4R
New member
Took the Kayak out for the first time. Only caught one but not too bad for my first NY fish.
Sent from my SM-G960U using Tapatalk
Nice fish, congratz
Magnetic-T4R
New member
I like it.
97BlackAckCL
Elite Member
Picture time for things completed this week, well most. Not picture is cold air intake, TRD oil cap, odyssey battery with Agency 6 battery clamp.
Victory 4x4 blitz bumper with warn VR8-S winch and 20” light bar. Painted the shackles dark blue to match better. Also installed TRD skid plate with letters painted dark blue.
Pulled off and painted rear silver valance black and added recovery hitch w/shackle.
My dad and I then built a custom rear storage compartment that is level with the back seats folded flat. Only has about 4” of space (bottom to top)but works for straps, tools and recovery gear to keep it out of the way. I wanted it level so I could sleep on it if needed.
Damn! I LOVE the storage compartments, nice and low but very useful. Would love to see some more pics and detail of the build process. I'd love to delete my third row and do an install like this. Looks great!
ANDY_FTLC
New member
Parents have a steep driveway if that means anything. Seems to be fine when i'm on level ground.
Similar threads
