What did you do to/in your 5th Gen today?!

[ChickenNuggets]

Try driving it first. It's a very capable truck right out of the box and you can mod as needed later.

Already took it offroad with only 42 miles on it haha and it did pretty well, it impressed me especially with the crappy tires. Ground clearance is definitely needed for sure

 

[honda250xtitan]

Took some photos early this morning. I’m happy with this setup. Now time for some camping!

perfect setup. those retrofits are clean.

Just finished these rear lower links up for my 2019 4runner. Using some spc flex seal joints. Best of both worlds. Heavy duty but quite for the street. I have heims and uniballs on my chase trucks and they just transfer to much energy thru them. And squeaky as hell.


Sent from my iPhone using Tapatalk

moarrrrrrrrrrrrrr fab pics

 

[TheJokingExplorer]

Any pictures of how/where you mounted it?

I ran 4 gauge wiring from the front battery along the drivers side and into the rear wheel well/ tail light section. Connected that to the blue sea fuse block which is where the stock tools kit is.



Sent from my iPhone using Tapatalk

 

[@jrfordlandia]

Installed a Dobinsons 302/505 lift kit with teal coils and black gas shocks for longer travel.

 

[Swipter]

With the sun change I can't see a thing going to work or coming home so I put LEDs in the low beams. I used Nineo II.

 

[Beckusmc]

Everything looks good!! I was wondering were you got the organizers on the back of the front seats? SEMPER FI!!

 

[jmickle11]

Grill Marker Lights

Installed the Seven Sparta Grill Lights today. Easy install and they look great!

 

[Shabang]

Tent Test

Just opened up my SmittyBilt Overlander tent to fit some LEDs inside and clean up some dust from drilling it in. Love this tent.

 

[knjbsc]

2018 SR5 Prem.- Installed Burtman 1" lift and LED Fog Lights

Had Burtman lift installed and front end alignment, looks and acts great. Also installed LED Fog Lights.

 

[jmickle11]

Had Burtman lift installed and front end alignment, looks and acts great. Also installed LED Fog Lights.

That looks really good! How much lift did you get with this?

 

[knjbsc]

That looks really good! How much lift did you get with this?

Only did the 1" front lift to flatten the body line and the wheel wells are even now. Surprised how much better it looks.......

 

[AFishEye]

I ran 4 gauge wiring from the front battery along the drivers side and into the rear wheel well/ tail light section. Connected that to the blue sea fuse block which is where the stock tools kit is.



Sent from my iPhone using Tapatalk

You can easily rotate the voltmeter after slightly modifying the bracket. Nothing to it.
YouTube Relevant part starts at 4:45
Here is an example after modifying the bracket (at the end of the post) https://www.toyota-4runner.org/3349053-post39801.html

 

[97BlackAckCL]

So I finally got around to tinting my new CarTrimHome sequential turn signals. I had originally done this on a stock replacement set, but wanted to give the sequentials a try.

First I masked everything off

Then I sprayed them with 5 coats of VHT

Then I wet-sanded the tint to smooth it out

Then applied a few coats of clear

Then I wet-sanded the clear smooth and polished them by hand till they looked like glass

Here's a side by side of my stock tinted set and the new tinted CarTrim set

And here they are all installed, way happier with this tint job than my first try on the stock ones I had previously.

And here's a shot of the sequential, they are WAY brighter than the stock turn signals even tinted dark.

 

[97BlackAckCL]

While swapping out the tinted turn signals, I alsoreplaced my Lasfit T10's with the Meso LED pods, and my God what a difference. The Lasfit T10 bulbs are great, and very very bright, but I couldn't believe the difference with the VLED pods from Meso.

Here's a before as I was installing them

And here is a side by side before and after, the new Meso on the right, and the Lasfit on the left

Further back

These are the same lumens, however the panel being out with no lens or diffuser produces so much more outward light.

Here's the Lasfit only, very bright on it's own, but nowhere near the throw of the VLED

 

[ruff4runner]

I went back to Death Valley to run Steel Pass!

 

[Snyder]

While swapping out the tinted turn signals, I alsoreplaced my Lasfit T10's with the Meso LED pods, and my God what a difference. The Lasfit T10 bulbs are great, and very very bright, but I couldn't believe the difference with the VLED pods from Meso.

Here's a before as I was installing them

And here is a side by side before and after, the new Meso on the right, and the Lasfit on the left

Further back

These are the same lumens, however the panel being out with no lens or diffuser produces so much more outward light.

Here's the Lasfit only, very bright on it's own, but nowhere near the throw of the VLED

Do you flip a switch to turn this puppies on? Looks like a nice alternative to having puddle lights with having lights attached to the bottom corners of your windshield.

 

[Daikon]

Went out to Rainbow Basin/ Opal Mountain this past weekend.

 

[Backwood]

Tires installed today. 285/70/17 wildpeaks. Eibach pro truck lift kit.

They rub, but ill be doing a CMC and some trimming soon.

 

[DAW89446]

I went back to Death Valley to run Steel Pass!

Did you run all the way to Saline Valley, or only part of it? I haven’t run the trail since I moved away from Big Pine 11.5 years ago.

 

[97BlackAckCL]

Do you flip a switch to turn this puppies on? Looks like a nice alternative to having puddle lights with having lights attached to the bottom corners of your windshield.

No, they come on when I unlock the doors. I have ditch lights for deer spotting and late night driving