stay_tuned
New member
Yeah everyone is good, it was just scary because i had my 2 week old son in the back.
on the bright side going to hopefully get a trd pro front out of it.
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Yeah everyone is good, it was just scary because i had my 2 week old son in the back.
on the bright side going to hopefully get a trd pro front out of it.
Thanks my next step to see if a 19 MY will fit. Was hoping to do it with just a few pieces. I don’t really want a pro grill and I didn’t really want to plasti-dip them. Want more permanent solution.
Doesn't look like the air bags deployed or we just can't see in the photo
Glad to hear everyone is OK
stay_tuned
New member
no air bags luckily since he just clipped the front end. our faces are definitely thankful for that
jtgrinsell
New member
Added this sweet mod to the back seat. My wife is expecting in a couple of months and I'm just getting a test run in with installing this thing so I'm not a total newb when the baby is here. Gives me a few months to cope with the fact that my car will never be clean again lol.
Attachments
TheWraith
New member
nice congrats!!!
SnowYeti
Member
Assembled a new Victory full length rack to replace my Rhino Pioneer. Had to make three notches in in side to fit an awning and my RTT at the same time.
The Rhino while a great product was not going to work for my RTT
Finished a fairing extension to be powder coated
Hopefully install soon
I had a housing printed to hold S2 work lights on the side rails, painted those today.
Finished a cargo platform design using 18/20 parts with a laser cut platform and rails for a frig/cooler slider. Ordered parts. It has movable tie downs, can be expanded, etc. it is going to be pretty cool. I will post whenever parts show up.
Then....ordered the new Eibach load leveling rear springs. 250#. Will be mated to my 5160s
The Rhino while a great product was not going to work for my RTT
Finished a fairing extension to be powder coated
Hopefully install soon
I had a housing printed to hold S2 work lights on the side rails, painted those today.
Finished a cargo platform design using 18/20 parts with a laser cut platform and rails for a frig/cooler slider. Ordered parts. It has movable tie downs, can be expanded, etc. it is going to be pretty cool. I will post whenever parts show up.
Then....ordered the new Eibach load leveling rear springs. 250#. Will be mated to my 5160s
Last edited:
EddieV4runnin
New member
You’re gonna find French fries and ketchup packets in every nook and cranny of that back seat.
Congratulation!
That sucked!! Glad no one hurt!!
Men how lucky you are, here in Alberta they closed all the trails...for off road vehicle.
Akmambarunner
New member
BEAR x SF
Member
I feel for you man but gotta look at the positives and your family is well. Always could be a lot worse, hope you get it back all fixed soon. Mine should be ready for pick up from the body shop this Friday, 24 days total without my rig and felt every day of it.
That being said, Toyota is running a promotion of buy 3 tires and get the 4th for $1. I've had my eye on the General ATX Grabbers for a while now and lucky me they're available for the promotion. Swung by my local service department today and ordered a set. As soon as I pick up my t4r I'm heading to the dealer and get rid of the stock Dunlops. Will be posting pictures when I get a chance.
a2marian
New member
Considering the very few trails here in Ontario, I was a little surprised too that there were no enforcement. The general rule here is 'don't be out if you don't have to', reason if unfortunately something were to happen to you, emergency services aren't spent on your 'unnecessary' travel.
The photos in my post were two most intimidating points of the day. Nothing dramatic. We took it easy knowing this was one of the easier 'open' trails. Most don't open until May 1.
I envy the trails in your neck of the woods, or any other along that mountain range down through the States.
SteadfastZach
New member
Installed LEDs in the fogs yesterday and finished up with the Headlights this morning. Thanks to the forum for assistance! Went with NINEO Leds for top and bottom. It was nice to have all the wires be able to cram in the dust cap.
These for the headlights
NINEO H11 H8 H9 LED Headlight... Amazon.com: NINEO H11 H8 H9 LED Headlight Bulbs | CREE Chips 12000Lm 6500K Extremely Bright All-in-One Conversion Kit | 360 Degree Adjustable Beam Angle: Automotive
And these for the fogs
NINEO H11 LED Headlight Bulbs... Amazon.com: NINEO H11 LED Headlight Bulbs w/Small Size,10000LM 6500K Cool White CREE Chips H8 H9 All-in-One Conversion Kit: Automotive
These for the headlights
NINEO H11 H8 H9 LED Headlight... Amazon.com: NINEO H11 H8 H9 LED Headlight Bulbs | CREE Chips 12000Lm 6500K Extremely Bright All-in-One Conversion Kit | 360 Degree Adjustable Beam Angle: Automotive
And these for the fogs
NINEO H11 LED Headlight Bulbs... Amazon.com: NINEO H11 LED Headlight Bulbs w/Small Size,10000LM 6500K Cool White CREE Chips H8 H9 All-in-One Conversion Kit: Automotive
Attachments
Last edited:
Blue 4ever Runner
New member
Oh man that sucks! Glad you're all OK. Must have been scary as hell especially with the little on in there.
Blue 4ever Runner
New member
Congratulations! A lot more than the cleanliness of your Runner is gonna change. If you do it right and have a bit of luck you will raise great kids like I have. Then if you're really lucky they will give you the best thing of all: GRANDKIDS! That's a long way down the road though. Enjoy the baby!
Similar threads
