What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
honda250xtitan
New member
Marlin crawler kit is nice huh? i've got three sides done. need to do one more mount still
honda250xtitan
New member
welcome to the bluecollar world of covid. everything is backordered. been like this since 2020.
thenameiszac
New member
Installed LEDs for low beams - I do understand HIDs give better output but needed a quick resolve from halogens for now.
I have morimoto fogs that will be install sometime this week also.
T4R_Canuck
Member
Did a spark plug change today as service records don't show when they were last done (I bought used). Swapped to Autolite XP Iridium, I guess we'll see how those perform. Old plugs had some life left and looked normal in my opinion.
Fired right up and ran well when I test drove it after.
Drivers rear plug was a big of a tight squeeze but still an easy job overall.
Sent from my SM-G991W using Tapatalk
Fired right up and ran well when I test drove it after.
Drivers rear plug was a big of a tight squeeze but still an easy job overall.
Sent from my SM-G991W using Tapatalk
I installed a set of Baja Designs LP-9 Pro’s behind the grille on a set of modified
Rago Fab light mounts and finished it up with the Toyota Heritage grille.
Here’s the modification part I speak of , these lights are heavy and without adding the midpoint mounts to the Rago Fab mount there would have been too much movement In the LP-9’s
They look good tucked away , and almost not noticeable.
The LP-9 Pro Racer editions have 3 modes
This is the low setting
This is the High setting
And this is the running light function if you want them on super low with your DRL’s they look great IMO with the Morimoto XB Amber drl’s
Rago Fab light mounts and finished it up with the Toyota Heritage grille.
Here’s the modification part I speak of , these lights are heavy and without adding the midpoint mounts to the Rago Fab mount there would have been too much movement In the LP-9’s
They look good tucked away , and almost not noticeable.
The LP-9 Pro Racer editions have 3 modes
This is the low setting
This is the High setting
And this is the running light function if you want them on super low with your DRL’s they look great IMO with the Morimoto XB Amber drl’s
Last edited:
honda250xtitan
New member
I installed a set of Baja Designs LP-9 Pro’s behind the grille on a set of modified
Rago Fab light mounts and finished it up with the Toyota Heritage grille.
Here’s the modification part I speak of , these lights are heavy and without adding the midpoint mounts to the Rago Fab mount there would have been too much movement In the LP-9’s
They look good tucked away , and almost not noticeable.
The LP-9 Pro Racer editions have 3 modes
This is the low setting
This is the High setting
And this is the running light function if you want them on super low with your DRL’s they look great IMO with the Morimoto XB Amber drl’s
nice work. i'm running their brackets and made my own outside the grille mounts as theirs are way too short. I wish their behind the grille brackets wouldnt wiggle so much with just 3 XL pro's on it.:spider:
DallasTRDPro
Member
I'm going to miss my 4R, but the market made it to tempting to sell it. I got $55K and traded for an Outback Wilderness. Makes my 4R feel like a dump truck. Lowered payment by $250/month. Check classifieds if you want anything.
Last edited:
lbro23
New member
Went out to go camping!
I see you've got a 1up on the swingout of what appears to be a CBI bumper. How do you like this setup? Do you have any close-up pictures of how they attach?
I've got a single swingout but am looking to weld on a hitch receiver. Having to take bikes off just to get into the trunk is driving me crazy, plus I'd like the better departure angle.
I'm going to miss my 4R, but the market made it to tempting to sell it. I got $55K and traded for an Outback Wilderness. Makes my 4R feel like a dump truck. Lowered payment by $250/month. Check classifieds if you want anything.
Saw a video on this thing comparing to a 4runner the other day and was actually suprised with some of the climbs it was able to eventually work it's way up. Seems like a pretty good comprimise, especially if you put a little chunkier tire on it. RTT capable rack, lots of space, lifted a bit. Not bad, Subaru.
Sisente
Member
Rising prices
Just bought my 2020 this past March. Did a search today, and same year, and model, with 13k miles on it (mine has 6K), is going for 10K over what I paid. Crazy
I'm going to miss my 4R, but the market made it to tempting to sell it. I got $55K and traded for an Outback Wilderness. Makes my 4R feel like a dump truck. Lowered payment by $250/month. Check classifieds if you want anything.
Just bought my 2020 this past March. Did a search today, and same year, and model, with 13k miles on it (mine has 6K), is going for 10K over what I paid. Crazy
Blue 4ever Runner
New member
Window decals
I put these on. Pretty easy to do. I used wet method on the driver's side and dry on passenger. For these stickers the dry worked better. No movement from where I wanted it to stay and no bubbles at all. Sorry for the reflections. I'm lazy and didn't feel like moving it lol.
Amazon.com: Mountain Decals for Toyota 4Runner in Matte Black for side windows - TF12A: Handmade
I put these on. Pretty easy to do. I used wet method on the driver's side and dry on passenger. For these stickers the dry worked better. No movement from where I wanted it to stay and no bubbles at all. Sorry for the reflections. I'm lazy and didn't feel like moving it lol.
Amazon.com: Mountain Decals for Toyota 4Runner in Matte Black for side windows - TF12A: Handmade
Attachments
CajunMikeR
New member
Installed an Accessorides remote start and picked up the new tire carrier, which can be seen here... https://www.toyota-4runner.org/5th-...tch-mount-spare-tire-carrier-post3658010.html
Tomorrow is the relocation of the backup camera and run new license plate lighting to the carrier. If I've got time, I'll install my auxiliary transmission cooler too.
Tomorrow is the relocation of the backup camera and run new license plate lighting to the carrier. If I've got time, I'll install my auxiliary transmission cooler too.
A10MileHusker
New member
New Bike Day. Took delivery and put it together.
Sent from my SM-G986U using Tapatalk
Sent from my SM-G986U using Tapatalk
Similar threads
