What did you do to/in your 5th Gen today?!

[Whippersnapper02]

NeW ShOeS

 

[ryan_k]

New battery


Sent from my iPhone using Tapatalk Pro

 

[Sisente]

Picked up some HardKorr lights for the canopy at camp. Just fitted them for use for all the other times. Magnetic mount to the molle panels. Control switch dimms and switches between orange and white.

Sent from my iPhone using Tapatalk

They have some really great pricing.

 

[rhadam]

Installed USR Depo headlights, ordered from yotamafia. I picked up the LED upgrade kit. Housings came without the high beams but a quick email to yotamafia has a set en route. The LED turn signals are bright. The built in low beam is clear, proper cut-off up front and to the sides. I'm not blinding oncoming traffic and can see much better. The Lexus style checkmark is how the vehicle should have come from the factory. Overall, i'm pleased... except for the fitment. I should have taken a better picture with the front bumper installed.. but the gaps between the front bumper, housings, and hood seem to be a bit too large. I'm going to pull everything out again when I install the high beams and see if I can improve the fitment.

 

[ChupacabraDaddy]

Got around to installing full aluminum RCI skids. Quality is great and the install was very easy and straight forward.

 

[Pistol Pietro]

Yesterday

Took a look at Lake Tahoe from Genoa Peak

 

[1000MPH]

7 hours into my vacation and she’s running like a top. 95° weather, running cool on rolling 2 lane roads. I dig my ScanGauge.

 

[Sparky9000]

Got around to installing full aluminum RCI skids. Quality is great and the install was very easy and straight forward.

Was there a particular reason you went CBI over other options? Having this debate with myself right now. Analysis paralysis!

 

[uh0h50]

Installed USR Depo headlights, ordered from yotamafia. I picked up the LED upgrade kit. Housings came without the high beams but a quick email to yotamafia has a set en route. The LED turn signals are bright. The built in low beam is clear, proper cut-off up front and to the sides. I'm not blinding oncoming traffic and can see much better. The Lexus style checkmark is how the vehicle should have come from the factory. Overall, i'm pleased... except for the fitment. I should have taken a better picture with the front bumper installed.. but the gaps between the front bumper, housings, and hood seem to be a bit too large. I'm going to pull everything out again when I install the high beams and see if I can improve the fitment.

Would love to see some output pics (on road and against wall). And definitely want to see those gaps.

 

[SoCalAl]

Johannesburg, CA

On the way home after two nights of camping with the family at Monache Meadows, I had to take this pic at Johannesburg:

 

[Solo4rnr]

Brought mine home from the dealership!!

 

[aabottom]

My 2016 SR5 is now a Die Hard machine. I installed it's 1st battery.

Die Hard GOLD 24F-6.
750 Cold Cranking Amp baby.

Original tray and battery clamps fit perfectly for the install. Now it starts like a champ.

 

[olyltd]

Bought this ‘21 Limited at MSRP couple weeks ago and yesterday installed Revtek 432X lift/level and added 275/60R20 Wildpeaks. Very slight rub in reverse with wheels full turn, but so minor I likely will not trim liner. Ordered N-Fab steps.

I did this exact setup on my ‘16 Limited but had 285/55R20 then. That size apparently is no longer available in Wildpeaks so I went with 33” size above and like it better.

 

[Frasher4Runner]

Bought this ‘21 Limited at MSRP couple weeks ago and yesterday installed Revtek 432X lift/level and added 275/60R20 Wildpeaks. Very slight rub in reverse with wheels full turn, but so minor I likely will not trim liner. Ordered N-Fab steps.

I did this exact setup on my ‘16 Limited but had 285/55R20 then. That size apparently is no longer available in Wildpeaks so I went with 33” size above and like it better.

I personally went with 275/55R20 (Cooper Discoverer AT3) because the diameter is almost exactly the same, so it doesn’t effect the speedometer.


Sent from my iPhone using Tapatalk Pro

 

[TRD PANTHER]

7 hours into my vacation and she’s running like a top. 95° weather, running cool on rolling 2 lane roads. I dig my ScanGauge.

Thanks for the reminder. Just ordered one now.

 

[Cleazy]

Dobinsons Coils 2.5/1.5 OME UCAs Dobinsons twin tube shocks

 

[olyltd]

I personally went with 275/55R20 (Cooper Discoverer AT3) because the diameter is almost exactly the same, so it doesn’t effect the speedometer.


Sent from my iPhone using Tapatalk Pro

I had the option of 275/55R20, but didn’t want smaller than what I had previously and personally like this new size and height and ride. Don’t notice much speed difference, but then again I don’t push the speed limits like I used to so a little faster in reality is still not more than 10 over.

This isn’t the best pic, but comparison with same kit and 285/55 on white and 275/60 on bottom silver.

 

[Joe-Runner]

Installed the anytimebackupcamera (but in the front). Took longer than expected but turned out great! No affect on my radar cruise thus far. Happy with it!

 

[lewdog998]

Installed the anytimebackupcamera (but in the front). Took longer than expected but turned out great! No affect on my radar cruise thus far. Happy with it!

Obviously it integrates into the entertainment system....is this a kit with everything you need?
Link please?

 

[IrishRover]

Dobinsons Coils 2.5/1.5 OME UCAs Dobinsons twin tube shocks

Looks nice! How’s the ride quality on the twin tubes?