What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
PCRIDE4RUNNERORG
Member
Changed the design a bit. Fits tighter and the fingers are lower for easy cup maneuver.
You can download and print the Yeti cup holder. Works in both cup holder positions.
4Runner Yeti cup holder by makerBOTwPCDEL - Thingiverse
You can download and print the Yeti cup holder. Works in both cup holder positions.
4Runner Yeti cup holder by makerBOTwPCDEL - Thingiverse
[Needed one of these for a long time after spilling my coffee into the passenger seat. I can now take my Yeti cup with me. 3D printed this cup holder
Last edited:
DriftingOverland
New member
Using a $12 HarborFreight “pelican” case, $8 aluminum bar, misc hardware, I built a removable case for some air tools that can hang on my molle panel.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slowgoat
New member
Picked her out Friday
I found a relatively rust free 2010 SR5 with some upgrades from the factory. Light rust (a miracle in N Wisconsin for that age of vehicle), very clean, no accidents, and in the color I wanted! Magnetic Grey.
I can't wait to dig through the countless 5th gen pages now!
So far, I started Fluid Filming the body (not much to do on 2nd inspection), took the tailgate apart and derusted that (light for the miles and area). Next will be inspection of the tranny fluid, differentials, and then making a list from the 5th Gen info and build pages!
:becky:
I found a relatively rust free 2010 SR5 with some upgrades from the factory. Light rust (a miracle in N Wisconsin for that age of vehicle), very clean, no accidents, and in the color I wanted! Magnetic Grey.
I can't wait to dig through the countless 5th gen pages now!
So far, I started Fluid Filming the body (not much to do on 2nd inspection), took the tailgate apart and derusted that (light for the miles and area). Next will be inspection of the tranny fluid, differentials, and then making a list from the 5th Gen info and build pages!
:becky:
Attachments
Last edited:
crawlingjunk
Member
Sent from my iPhone using Tapatalk
TRDfan2011
New member
Got ten years from oem Panasonic battery
Replaced the oem battery on my 2011 SR5. Picked up a Walmart 24F Maxx series for $100. They've lasted the 5 yrs in previous vehicles. I probably would've gotten more out of the oem if I had taken care of it. All the cells were at the minimum line.
Replaced the oem battery on my 2011 SR5. Picked up a Walmart 24F Maxx series for $100. They've lasted the 5 yrs in previous vehicles. I probably would've gotten more out of the oem if I had taken care of it. All the cells were at the minimum line.
Sisente
Member
More trails in the Ouachita National Forest
I hit some more trails today. Met up with some friends, and we explored some new areas none of us had been to before. Had a great time, and the weather was awesome. 68 degrees and sunny. Not a cloud in the sky.
34°46'39.3"N 92°59'48.2"W
I hit some more trails today. Met up with some friends, and we explored some new areas none of us had been to before. Had a great time, and the weather was awesome. 68 degrees and sunny. Not a cloud in the sky.
34°46'39.3"N 92°59'48.2"W
Attachments
Sent from my iPhone using Tapatalk
That’s creepy. Looks like you took a picture of my dash, exact same MPG and just rolled 10k, lol
Blue 4ever Runner
New member
I'm not totally sure about this. I've always liked wood, pistol grip shift knobs so I got this one. It fits good and feels good in the hand but since there's no other wood in the interior it looks a bit out of place. I'll live with it for now. I think Ill probably keep it.
Amazon.com Page Not Found
Amazon.com Page Not Found
Attachments
blksubykid
Member
ttime4four
New member
Using a $12 HarborFreight “pelican” case, $8 aluminum bar, misc hardware, I built a removable case for some air tools that can hang on my molle panel.
Sent from my iPhone using Tapatalk
NICE!
Can you provide a link on the "misc hardware" that connects together?
honda250xtitan
New member
BIG wood guy huh? :drummer:
Blue 4ever Runner
New member
^^ hahahaha!!!!!
DriftingOverland
New member
Here you go…
6 Pairs Flush Mount Bracket,Interlocking Furniture Connector,Stainless Steel Heavy Duty Photo Frame Hook Picture Hanger for Large Picture Display Art Gallery Wall Mount Hardware - - Amazon.com
They fit perfectly on the back of the HB case.
And some #6 machine bolts, nuts, washers.
Then bolts/rivnuts to attach bar to the FinnFab molle.
Sent from my iPhone using Tapatalk
Last edited:
rhadam
New member
You could try sanding and putting a grey/colormatch coat on it?
mrblah
Senior Member
prinsu back plate
made a backplate for my prinsu fairing out of recycled plastic.
1. cut a piece of useless plastic in the color you want, or buy some acrylic sheets.
2. either use lots of double sided tape (make sure you press it down for a while) or screw it down.
3. thinner the plastic, the easier to cut (with a razor blade) or a dremel if its thicker.
4. revel in your artistic masterpiece, while you enjoy a cold beer.
made a backplate for my prinsu fairing out of recycled plastic.
1. cut a piece of useless plastic in the color you want, or buy some acrylic sheets.
2. either use lots of double sided tape (make sure you press it down for a while) or screw it down.
3. thinner the plastic, the easier to cut (with a razor blade) or a dremel if its thicker.
4. revel in your artistic masterpiece, while you enjoy a cold beer.
Attachments
Last edited:
smeerun
New member
That is actually pretty cool man. Pic of it on the rig?? Might have to do this to the SSO logos on my rack.
Similar threads
