Thanks! That is what I do right now. I have a pair of S2's on each side and a pair of rear facing squadrons ont he rack, so those gaps are filled to capacity. Was just thinking about the KC wire hider if I ever wanted a light bar up there.
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Thanks! That is what I do right now. I have a pair of S2's on each side and a pair of rear facing squadrons ont he rack, so those gaps are filled to capacity. Was just thinking about the KC wire hider if I ever wanted a light bar up there.
Busy week….
‘22 ORP Installed:
Trd intake and exhaust
Urd maf controller
Pedal commander
Blue interior led lights in overhead positions front to back
Lasfit led blinkers front and rear plus reverse lights
Yellow drl’s
Cargo and rear seat covers
Trd pro black shift lever
In garage:
Arb skids
Kdss skid
Kdss controller
Kdss sway link extensions
Warn winch/factor 55 fairlead and ultra hook
Toytec aluma boss lift with UCA’a (awaiting coilovers)
Rear track bar relocation mount
On order:
Sso bumper and wings
Foxwood sleeping platform
Still need to decide on what ditch lights and lightbar ill go with. Probably hereteic studio if it will fit the BD bumper cut. Still deciding tires. Likely Territory MT
‘22 ORP Installed:
Trd intake and exhaust
Urd maf controller
Pedal commander
Blue interior led lights in overhead positions front to back
Lasfit led blinkers front and rear plus reverse lights
Yellow drl’s
Cargo and rear seat covers
Trd pro black shift lever
In garage:
Arb skids
Kdss skid
Kdss controller
Kdss sway link extensions
Warn winch/factor 55 fairlead and ultra hook
Toytec aluma boss lift with UCA’a (awaiting coilovers)
Rear track bar relocation mount
On order:
Sso bumper and wings
Foxwood sleeping platform
Still need to decide on what ditch lights and lightbar ill go with. Probably hereteic studio if it will fit the BD bumper cut. Still deciding tires. Likely Territory MT
Last edited:
Humble Leader
Senior Member
here's what it looks like. you can obviously see where it inserts, but I've never used the tissue holder and now I have more storage room
Attachments
DallasTRDPro
Member
No pics??
I will once the lift is on. Just a stock looking truck with a bunch of boxes next to it right now.
Last edited:
Sliders and Molly panels
Did some work this weekend putting the sliders and some Molly panels on the rig.
Performance tip: if your truck is older, run a tap in the frame holes before you try to put the sliders on.
Imgur: The magic of the Internet
Did some work this weekend putting the sliders and some Molly panels on the rig.
Performance tip: if your truck is older, run a tap in the frame holes before you try to put the sliders on.
Imgur: The magic of the Internet
Actuator Motor - Door handle issue arises
Today I replaced the front driver's side actuator motor on my 2017 4Runner.
Seems to be a common problem with an easy fix. I used an old post from the forum, which proved to be a big help. The process was fairly simple and all seems to be working. My door now locks and unlocks with my key fob.
HOWEVER, now my outside door hand is non-operational! Not sure what I did, but I must have knocked something loose. Probably an easy fix, but I have not had a chance to research the problem.
Any ideas????
Today I replaced the front driver's side actuator motor on my 2017 4Runner.
Seems to be a common problem with an easy fix. I used an old post from the forum, which proved to be a big help. The process was fairly simple and all seems to be working. My door now locks and unlocks with my key fob.
HOWEVER, now my outside door hand is non-operational! Not sure what I did, but I must have knocked something loose. Probably an easy fix, but I have not had a chance to research the problem.
Any ideas????
Just did both front doors yesterday. Likely that metal rod that comes down into the hole on the actuator. See this video at the marked time: https://www.youtube.com/watch?t=855&v=NgGl87pyhH4&feature=youtu.be
honda250xtitan
New member
ordered up an RCI skid plate and filler piece. Stock plate finally got to smashed up to re install.
Late to the reply here.
what console safe do you have?
I had a console-vault on my subaru, thinking of getting the one for the 4runner.
Roger
what console safe do you have?
I had a console-vault on my subaru, thinking of getting the one for the 4runner.
Roger
mrkothegigolo
New member
I have the LockerDown one and it is awesome. Super beefy. Kinda pricey but 100% worth knowing your items are secure
Humble Leader
Senior Member
lockerdown console vault. they make two versions for the 5th gen. I have the one that doesn't have the electronic lock. fitment is great. toyota also makes and OEM one for later model 5th gens. the lockerdown I can confirm does not restrict access to the three pronged outlet if you have a limited trim
EddieV4runnin
New member
Installed 2021 ORP LED low/halogen high beam headlight assemblies and Diode Dynamics SS3 Sport SAE yellow fogs onto my 2017. Very happy with the results.
How difficult is this to install? Will they plug right on to the non LED harness?
Outside of wrestling off the passenger side splash guard it couldn’t be simpler.
Sent from my iPhone using Tapatalk
TexasTJ
New member
Super simple. I recommend removing the whole bumper, but I didn’t because I have a hidden winch mount that sandwiches the bumper cover. There’s a video on YT that shows how to do the connector swap, that part literally takes just a few minutes. Just remember to test the lights before you reinstall the bumper because you may have to reverse the wiring in the connector.
4Runner2.0
New member
Similar threads
