Joe-Runner
New member
Spent all day doing clay bar, paint correction, and three coats of Avalon King ceramic coating. Removed nearly all of the Swirls and scratches and hopefully this coating will protect from new ones!
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
baldrik78
New member
This makes me jealous of people that can wash and wax in the winter. It basically rains here from October to April
out:
patkelly4370
New member
If I wash mine while in town, it's dirty by the time I get home.This makes me jealous of people that can wash and wax in the winter. It basically rains here from October to April
If I wash it at home, it's dirty before I'm done. We have no pavement. All dirt. Washing the car makes a mud puddle.
Sent from my SM-G955U using Tapatalk
Joe-Runner
New member
Don't have that problem here!This makes me jealous of people that can wash and wax in the winter. It basically rains here from October to April
I've got Texas plates but actually live in Vegas. One HUGE benefit of living here is how easy it is to keep a clean vehicle [emoji41] I grew up in Northern MN so I certainly know the struggle!
What tire/wheel/lift specs?
oljedi11950
New member
<<<<
Senior Member
Nicely done and lucky for you to live in desert. I can't get to any of that until March or even April since it is 4'F here in KC and salty roads everywhere. I wish I didn't have to drive in the winter
4Runner2.0
New member
RC Vertex 3"lift
Rough Country 4WD Toyota 4Runner, FJ Cruiser 3" Vertex Adjustable coilover lift kit, N3 Nitro shocks 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
295/70/17 Nitto Ridge Grapplers
Discount Tire | Tires and Wheels for Sale | Online & In-Person
17" Fuel 1-Piece
http://www.fueloffroad.com/wheel/15026/fuel-1-piece-wheels-block-beadlock-d124/?finishID=4434&lugs=6
UCA- SPC
SPC Adjustable Upper Control Arm for Toyota 4Runner 2010-Present - YotaMafia
BMC
Attachments
Last edited:
PretzelCann0n
New member
Brought this psychopath to the beach.
freak4life
New member
What are the Goose Gear plates made of? And how are they attached?
I made a plate that covers everything in the back, and I can't decide how to fasten it down? Rivnuts through the steel floor. It adds a hole but then again it gets plug with a bolt, also the two OEM tie downs have threaded hole straight through so it would be the same. Or I could grind a little off the floor coating and tack weld brackets. Or maybe just use rivets. I just don't know.
I made a plate that covers everything in the back, and I can't decide how to fasten it down? Rivnuts through the steel floor. It adds a hole but then again it gets plug with a bolt, also the two OEM tie downs have threaded hole straight through so it would be the same. Or I could grind a little off the floor coating and tack weld brackets. Or maybe just use rivets. I just don't know.
jrza101
New member
Finally got around to installing the LEDs gifted me by Auxito Lights. Shipping was quick, install was about as easy as they come, took me maybe 5 minutes!
Two things that I hated that came stock on the 2020 ORP, the speakers (upgraded to a full OEM Audio Plus, HUGE improvement, well worth the money) and the headlights.
Below are the comparison pics, remarkable improvement for a low price. Sure, I’d love to toss in $1400 Morimoto’s and maybe someday I will, but for now, these were a vast improvement over the stock bulbs and a fraction of the cost.
Stock headlights before
Auxito H11 LED low beam, 100W, 20,000 lumen, 6000K cool white.
Check them out! AUXITO Automotive Lighting | Yours Ahead of the Ultimate Choice
Sent from my iPhone using Tapatalk
Two things that I hated that came stock on the 2020 ORP, the speakers (upgraded to a full OEM Audio Plus, HUGE improvement, well worth the money) and the headlights.
Below are the comparison pics, remarkable improvement for a low price. Sure, I’d love to toss in $1400 Morimoto’s and maybe someday I will, but for now, these were a vast improvement over the stock bulbs and a fraction of the cost.
Stock headlights before
Auxito H11 LED low beam, 100W, 20,000 lumen, 6000K cool white.
Check them out! AUXITO Automotive Lighting | Yours Ahead of the Ultimate Choice
Sent from my iPhone using Tapatalk
jrza101
New member
Finally got around to installing the LEDs gifted me by Auxito Lights. Shipping was quick, install was about as easy as they come, took me maybe 5 minutes!
Two things that I hated that came stock on the 2020 ORP, the speakers (upgraded to a full OEM Audio Plus, HUGE improvement, well worth the money) and the headlights.
Below are the comparison pics, remarkable improvement for a low price. Sure, I’d love to toss in $1400 Morimoto’s and maybe someday I will, but for now, these were a vast improvement over the stock bulbs and a fraction of the cost.
Stock headlights before
Auxito H11 LED low beam, 100W, 20,000 lumen, 6000K cool white.
Check them out! AUXITO Automotive Lighting | Yours Ahead of the Ultimate Choice
Sent from my iPhone using Tapatalk
Two things that I hated that came stock on the 2020 ORP, the speakers (upgraded to a full OEM Audio Plus, HUGE improvement, well worth the money) and the headlights.
Below are the comparison pics, remarkable improvement for a low price. Sure, I’d love to toss in $1400 Morimoto’s and maybe someday I will, but for now, these were a vast improvement over the stock bulbs and a fraction of the cost.
Stock headlights before
Auxito H11 LED low beam, 100W, 20,000 lumen, 6000K cool white.
Check them out! AUXITO Automotive Lighting | Yours Ahead of the Ultimate Choice
Sent from my iPhone using Tapatalk
honda250xtitan
New member
factory floor has threaded holes covered by the carpet i believe. Goosegear should have install instructions somewhere.
rageandlove
Member
[MENTION=692998]Leadnuts[/MENTION] ... Goosegear (and lots of the other custom things people have posted about) use the factory tie-down points, so entirely reversible / no need to drill your vehicle.
Goose Gear Cargo Plate System Step by Step Install on 5th Gen 4Runner
Similar threads
