What Did You Do To Your 3rd Gen Today?

[RIDEALL]

Replaced A/F Sensor (Denso 234-9002). Check light back on ten minutes into test drive:-(
No big deal still need to clean MAF.
Also bypassed radiator with a B&M 70264. Went pretty smooth thanks too reading up on everyone else's experiences, big thanks too the 'community'!!
Went the zip tie too AC condenser route. Plenty of coverage elsewhere on this subject.
I will definitely be more at ease on these hot summer road trips;-)

Just leaving factory hose attached too radiator, cutting too proper length, and looping onto other end with factory clamp;-) was definitely a quick easy way to cap that off.

Soon the Wife will have new car, then 4Runner will be all mine!!!!
Can't wait to get into the fun mods;-)

 

[fenrisx]

Cleaned the inside of my truck pretty good.. pulled the seats and some plastic to get more debris out. Noticed I have a mold problem (I think) caused by water entering the cab in the front drivers side! No bueno!

note: this is the underside of the carpets

 

[farmerjon]

Wheeled it the hardest I've ever done and challenged my driving skills.

Nothing broke, my T4R is a monster!

 

[Shibby!]

Washed and waxed after last weekends trail riding and camping.

She looks good again! (not that I didn't like the mud on it...).

 

[ColoYotaGurl]

Oil change, air filter and spark plugs this morning. Wash, wax and tire shine this afternoon.

 

[White 4x4runner]

Just finished pulling the axles to do wheel bearings and all that good stuff... Monday I gotta get the new ones pressed on and and clean the piss out of everything to get the gear oil and brake dust off.
I knew I shoulda done the bearings a last summer when I did the oil seals.

 

[Skrimz]

Pulled my rear diff that was causing a shake, installed new diff with ARB locker, mounted compressor, now just need to figure out how to do the wiring. and hope I got the gearing right. We will see today?

 

[BlackCat914]

Took my running boards off and did some very minor surface rust repairs on the gas tank shield and stuff.

Before:

After:

 

[junr]

I had my Tacoma otre's, lbj's installed and I installed my sway bar end links too.

Next up...save for rock sliders, cb, hi-lift and on and on....

junr

 

[Millerad1651]

what sway bar links are those?

 

[BlackCat914]

My DDMtuning.com 4500K HID's finally showed up today, so I installed those. I'm going to go back out to the garage in a little bit and tackle all 3 belts. It's a perfect cool rainy day to be working in the garage.

 

[junr]

what sway bar links are those?

Stick Figure (username) makes them. So far so good. He's making me some spacers for the front, that's why there are washers there.

junr

 

[BlackCat914]

Installed my HID's, replaced all 3 belts, and de-badged the rear hatch.


Public Service Announcement: Do not remove the Toyota emblem by the rear wiper arm. There are alignment holes under it.

 

[Sr5_runner]

Installed my HID's, replaced all 3 belts, and de-badged the rear hatch.


Public Service Announcement: Do not remove the Toyota emblem by the rear wiper arm. There are alignment holes under it.

Did you get any led lights to stick in the corner lights to match the bulb color? Ive been waiting to order my hids till i figured out what leds i could get to match the bulb color of my hids

 

[theizzardking]

well i don;t have any pics , and still have a bit to do before i make a build thread or have the energy to put into such things but here's a short list of what i've done to the truck in the last month....

radflow adjustable coil overs
lc 8.25 wraps
billstien 5125
arb front bumper
mile marker winch
hella 550f with OEM switch
whitson roof rack w/ drop in ~on the way
dura tracs 285's
avh-32000 h/u with dvd trip switch in knock out location
ES bushings through out
tundra 231 brakes with brembo slotted ~waiting on rotors
avs rain guards
cargo box w/ sleeping platform
custom rear floor mats=hack job~cut old front mats to fit like weather techs in the back

installed my hidden hitch
front tint to match the rear factory
taco whip
all fluids
plugs
wires
timing belt
water pump
air filter
alignment
dent removal by some meth heads they also polished the whole truck~$50 total...lol ..and they did a good job too!

and i'm sure i'm forgetting somethings.....i'll be adding pics in the next week or so and creating a build thread for all of this crap.

 

[BlackCat914]

Did you get any led lights to stick in the corner lights to match the bulb color? Ive been waiting to order my hids till i figured out what leds i could get to match the bulb color of my hids

You mean the sidemarker bulbs? No, the only LED's I *might* do are the the tail lights and the IPC lights. However, www.DDMtuning.com has LED's for all applications as well.

 

[TegoXR]

Still soaking my fuel filter before the install.

 

[Harleydoc]

Just finished my lift install got my OME 890 after the shop sent my the wrong one. PB blasted all the alignment bolts so they will be ready for alignment shop in the AM. It rides a 100 times better with this set up I got on here now OME all the way around.

 

[zacattack20]

I've had a jaos spoiler sitting around for like 6 months waiting for me to take it to be professionally painted. Instead I finally decided to just paint it myself, it came out decent enough.

Yesterday I painted.

Today I installed.

 

[CanadianTRD]

Nice custom badging, I haven't seen a TRD badge like that, in that spot. I have been contemplating putting the 4Runner badge back on, leaving the sombrero bean off, and TRD on the lower right.

I am still going totally badgeless until I decide on a look. Once I stick em on, they aint comin off. :cowboy:

Which tails are those? I like the look on our black runners. Oh and Badass spoiler :bigok: