What Did You Do To Your 3rd Gen Today?

[RIDEALL]

Cleaned my MAF and Throttle Body. No more Check Engine Light!!!
Starts quicker, idles smoother and about 100 rpm lower, and seems a touch smoother in low throttle situations.
Very happy when quick simple projects have results you can feel;-)
Oh and ditched the K&N filter from previous owner with factory Toyota filter, so hopefully MAF stays clean longer.

 

[fenrisx]

hopefully fixed a leak coming through the grommet on the driver side firewall

 

[giguchan]

Cleaned my MAF and Throttle Body. No more Check Engine Light!!!
Starts quicker, idles smoother and about 100 rpm lower, and seems a touch smoother in low throttle situations.
Very happy when quick simple projects have results you can feel;-)
Oh and ditched the K&N filter from previous owner with factory Toyota filter, so hopefully MAF stays clean longer.

what code did you receive when the CEL came on?

 

[TegoXR]

Replaced fuel filter and wow what a difference!

 

[WrexHAmm]

Picked up the Outdoor Logic passenger side antenna mount from Toytec and in case if you didn't notice Toytec is now carrying OL stuff. Which is freaking awesome! Little bending to make sure it clears the rear hatch but fits pretty darn good.

 

[ryankmasuda]

The Kid and I worked on my Snorkel install.

<a href="http://s11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/?action=view&current=BC8963E3-6933-43D8-AF1F-45860239D404-424-0000002A88B98738.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/BC8963E3-6933-43D8-AF1F-45860239D404-424-0000002A88B98738.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

<a href="http://s11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/?action=view&current=3B849F6A-1E1B-496C-89A1-FF3878845DCB-424-0000002A98778D7C.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/3B849F6A-1E1B-496C-89A1-FF3878845DCB-424-0000002A98778D7C.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

<a href="http://s11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/?action=view&current=8E61CA8E-BEB9-423F-B2DF-3471569283CB-424-0000002AB3DA86DC.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/8E61CA8E-BEB9-423F-B2DF-3471569283CB-424-0000002AB3DA86DC.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

<a href="http://s11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/?action=view&current=958392E7-97A3-45E8-8914-7AFCAA65A0B7-372-000000191C7B9CD7.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a155/ryankmasuda/Toyota%204Runner%20Build/958392E7-97A3-45E8-8914-7AFCAA65A0B7-372-000000191C7B9CD7.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

 

[renosauce]

its not a 3rd gen but its a truck i worked on today...
building an exo cage..

 

[CharliePR74]

Installed new IAC Valve. Now idles just like new! No more shaking nor shutting off on me. Also installed new KC Hilites backup lights! Got the KC brackets too and did the three way configuration using a Contura II DPDT switch (always on/off/on only when backing up).

Just waiting for those tailgaters with their high beams

 

[playinitslo]

vc gaskets, almost fail. 890s

Nice those kc's they look good,

I busted out the dreaded valve cover gaskets with the cam seals also. All went good except for when I dropped my socket down an oil drainage hole and though I just destroyed everything iv done..... luckily my 5 dollar bolt magnet saved my butt! Oh and I threw on some Ome 890s, best upgrade to date!

 

[giguchan]

I envy the snot out of you guys.... i really do... it must be pretty rewarding to be able to do things to your truck......

I love Progress!


I ordered my Perkins performance rear bumper today..... then i'll move to the front... More on that later..

 

[chris_96runner]

Today I replaced the right rear sway bar end link after snapping it wile I was off roadin lol. While I had the wheels off I checked and adjusted my rear brakes, then bolted the corner of the skid plate for the gas tank back up cuz that was hanging too.

 

[revenantdead]

installed the clear corners i got from Atreyus!! still waiting on my ARB clear turn signal lights. and order the relays to build the dual speed fan control circuit for my mark VIII fan.

 

[theizzardking]

Picked up my whitson rack from powder coat and installed it by myself , will make a brief writeup tomorrow.

 

[renosauce]

got some more time in on the runner exo cage today...

 

[Volley]

Ordered a new CV to install this weekend :-/

 

[Sr5_runner]

got my trd stickers on

fixed my rusted out liscense plate bulbs so i can go to the bar tonight

body lift came in the mail

 

[fish0281]

Hopefully fixed an annoying suspension 'clunking' noise by tightening my sway bar end links. One was loose at the bottom (really loose) and the other loose at the top, go figure.

 

[T4Rex.]

got my trd stickers on

fixed my rusted out liscense plate bulbs so i can go to the bar tonight

body lift came in the mail

HAHAHA...u could go to a junkyard and pick up a new handle for your tailgate!!! just a suggestion!! like the TRD stickers on ur rig though, good choice in spending money!!! priorities in line F the police!! and besides that is only used a couple hours outta the night be SNEEAKY!!

 

[Sr5_runner]

HAHAHA...u could go to a junkyard and pick up a new handle for your tailgate!!! just a suggestion!! like the TRD stickers on ur rig though, good choice in spending money!!! priorities in line F the police!! and besides that is only used a couple hours outta the night be SNEEAKY!!

o i'm going to drill them out and re tap but i was at work and the drill bits from parts weren't doing anything so that was my quick fix to go to the bar and not get pulled over for something stupid haha

 

[T4Rex.]

no doubt! very creative! LOL!