What Did You Do To Your 3rd Gen Today?

[Triple G]

Which clear corners are these? Have a link to where you bought them?

Thanks!

I got them from the ebay seller "neondials"

1999 2001 Toyota 4Runner 4 Runner 4pcs Clear Corner Lights Bumper Signal Combo | eBay

I have yet to install the turn signals, I need to buy some orange bulbs for them.

 

[viceversa]

Yup...think it is about time to replace those belts

 

[viceversa]

Also noticed a small fluid leak back near the transmission while my 4runner has been in the air for a week with all "new owner" repairs im doing. Went to investigate...the transmission fluid fill plug was hand loose!! and this is why I don't trust anyone to work on my vehicles...

 

[MileHighClimb]

Spent my weekend working on my lift. I couldn't be any happier!

 

[slides]

I went to town on the underbody with truck bed liner. Used roughly 30 sq ft on all the exposed frame, lines, mounting, body etc....going to give it another coat tomorrow. hopefully it keeps the rust at bay for a few extra years.

 

[AZ4Running]

Finished up installing Energy Suspension front control arm bushings and front wheel alignment. Rides so nice now

 

[Neil_R]

Bent the alternator tension bolt. PB blaster had nothing on this thing.

 

[airmax233]

Spent my weekend working on my lift. I couldn't be any happier!

Nice!! What lift did you go with? Are those eibach coils?

 

[dgoll75]

Finished my dash bezel reconstruction. Pretty stoked with the result...
More about it here...http://www.toyota-4runner.org/3rd-gen-t4rs/179446-navigation.html

 

[MTD]

Finished my dash bezel reconstruction. Pretty stoked with the result...
More about it here...http://www.toyota-4runner.org/3rd-gen-t4rs/179446-navigation.html

I have been thinking long and hard about doing this, glad to see it turned out for ya!

 

[murdarunna19]

Interesting mod, you going to sand and paint the pieces?

 

[MTD]

I think I will end up deleting the clock with mine though no need to have one if my radio is where I can see it.

 

[zgensler31]

I think I will end up deleting the clock with mine though no need to have one if my radio is where I can see it.

Looks like his is a voltmeter. Voltimiter? Voltage meter? Dammit this is a hard one.

 

[MTD]

Looks like his is a voltmeter. Voltimiter? Voltage meter? Dammit this is a hard one.

Voltmeter lol


This explains why it is 13.89 o'clock lol

 

[jzme]

New wheels and tires

 

[slapdappy]

long and hard

ha ha

 

[SKRS1]

They grow so fast :sobbing:

 

[MileHighClimb]

Nice!! What lift did you go with? Are those eibach coils?

I bought some 8.75 LC coils for the rear and got the front struts and rear shocks from a member on the forum. Yes they are Eibach coils. They have a nice ride.

 

[dgoll75]

Interesting mod, you going to sand and paint the pieces?

I actually used truck bed liner spray to coat it. I need to do another coat or two as I made a bit of a mess when i trimmed out the a/c vent holes.
AND yes its a voltmeter (ummm voltage meter... .) in place of the clock and I really like having it so that's why I kept it.

 

[T4RGen3]

Bought my 3rd gen 3 weeks ago and today was the day she got jacked up...installed my new OME 3" lift this weekend and finished it up this morning! Now it's time for bigger rubber...thinkin' bout 265/75's, but 285's would sure look nice...

Finally got her done....wheels/tires and trimmed in black...gave her a good cleaning today to show her off.