What Did You Do To Your 3rd Gen Today?

[Bad Luck]

[MENTION=304599]Boom_ROASTED[/MENTION] Did those cables come with the new head unit or did you have to buy them? Got a link to them if you did buy them?

 

[Boom_ROASTED]

[MENTION=304599]Boom_ROASTED[/MENTION] Did those cables come with the new head unit or did you have to buy them? Got a link to them if you did buy them?

The two usb and one aux from behind the dash are part of the head unit

The cables in the seat I found on amazon. They have a few different styles and a few different companies selling the exact same thing

https://www.amazon.com/BATIGE-USB3-...eywords=usb+cable+mount&qid=1571169739&sr=8-7

 

[Red October]

New shoes, new wheels, new look... same dirty ol' Red!

Wheel offset is about perfect, lines up nicely with the outside of my armor, but not any further 16x8 -10ET (roughly 4.00 inches BS)

New General Grabber At/x are a little taller and slightly wider than the outgoing Duratracs ( yes, they are the same size 285/75r16 ), not bad or good necessarily just noting some difference

 

[sean.turner.1238]

Just finished installing my clear corner headlights from Jason at Burtman Industries. Very nice product, I'm thrilled to have a slightly more JDM-esque look to my 4runner! They also came with amber lights (which are required since the new housings are clear). The light plugs required a bit of modification to fit, but I got them to work. You basically have to cut/sand down the ridges on the sides of the plug. In the photo, the new plug is on the right and the old plug is on the left.

Sent from my SM-G950U using Tapatalk

 

[4Runner4Leon]

Had enough of the "DYK" plate, time for something more appropriate!

 

[photoleif]

full coolant flush with thermostat replacement, and re-bled the brakes after last week's TBU.

 

[Kanoe]

Clutch replacement. Yikes, what a pile of work that is. Hope I don't have to open that up again anytime soon. About 18 hours from prep to cleanup. Did the starter contacts while in there.

 

[xcmountain80]

I wondered what the hell the noise was and notice an increased amount of wondering if the front end.


Found it!

Sent from my iPhone using Tapatalk

 

[tubaguy]

I strapped some fishing kayaks onto the roof of my 2000 SR5, and it worked really well.

 

[WisdomJR]

I started to swap out my vacuum line with silicone lines! Going to finish it up this weekend!

 

[Renbuguy]

I swapped out my LBJ's(unknown age) with genuine Toyota ones. All was going well until TWO of the four bolts snapped that hold the LBJ to the knuckle. And yes, I did soak them in PB blaster for a week ahead of time. It seems a poor design for the two most inboard to have exposed tops that corrode easily. Anyway, drilled them out and fixed the threads. All back together today...

 

[xcmountain80]

Found a better option for a 2” body lift steering spacer. No one from Malaysia seemed to thing it would work on my 2002 4Runner. I counted the splines and thought “should work”.

Sent from my iPhone using Tapatalk

 

[sean.turner.1238]

Dipped my grill and rims. Love how it looks

Sent from my SM-G950U using Tapatalk

 

[infamousRNR]

Just finished installing my clear corner headlights from Jason at Burtman Industries. Very nice product, I'm thrilled to have a slightly more JDM-esque look to my 4runner! They also came with amber lights (which are required since the new housings are clear). The light plugs required a bit of modification to fit, but I got them to work. You basically have to cut/sand down the ridges on the sides of the plug. In the photo, the new plug is on the right and the old plug is on the left.

Sent from my SM-G950U using Tapatalk

what are you doing with your OEM corners? wanna sell them>?

 

[panisome]

xcmoutain80 how did it work out with the spacer?

nice find - did you install it yet?

Found a better option for a 2” body lift steering spacer. No one from Malaysia seemed to thing it would work on my 2002 4Runner. I counted the splines and thought “should work”.

Sent from my iPhone using Tapatalk

 

[sean.turner.1238]

what are you doing with your OEM corners? wanna sell them>?

Your PM inbox is full. But yes

Sent from my SM-G950U using Tapatalk

 

[Skar90]

Cool thread!

 

[mikewillsmigh]

What I did today

<a href="https://eastcoastrover.smugmug.com/Cars/2001-4Runner/n-cL4XGp/i-QxVQGZm/A"><img src="https://photos.smugmug.com/photos/i-QxVQGZm/0/2b35dfd1/L/i-QxVQGZm-L.jpg" alt=""></a>

 

[tgreenwood75]

What I did today

<a href="https://eastcoastrover.smugmug.com/Cars/2001-4Runner/n-cL4XGp/i-QxVQGZm/A"><img src="https://photos.smugmug.com/photos/i-QxVQGZm/0/2b35dfd1/L/i-QxVQGZm-L.jpg" alt=""></a>

That looks way too clean to be a Maine truck! What is being done to it?

 

[mikewillsmigh]

That looks way too clean to be a Maine truck! What is being done to it?

This is NC truck that we are preparing to live in Maine. So galvanizing the frame and swapping it to a 5 speed (and some other things. Small lift, etc)