What did you do with your 4runner today?

Just replaced front brakes...Napa Premium pads and rotors...also changed the oil...used Mobil 1 and OEM oil filter, air filter was dirty so I'm gonna order an OEM on Amazon
 
Little road trip to meet some family at a state park, then some preventative maintenance. Rotate tires, oil change, diff oil change.

guYg6ot.jpg
 
New ome 884's with camburg uca's!!
Alignment tomorrow..:lasercannon:

Props to @havingfun for the 884 install.
Props to @arkswamprider for the suspension knowledge.
 

Attachments

  • image.jpg
    image.jpg
    130 KB · Views: 522
Last edited:
I ran Fins n Things in Moab with my buddy and his rubicon!!!

His next rig will be a T4R!!! He was running 35" tires, front and rear lockers, no sway bars, and aired down. I locked my center diff, didn't air down and kept up on all but 2 A/B lines. One of them is pictured below. The A line is the one with the big ass drop and the B line is the line that was steep as, rhymes with duck! A full size Chevy Silverado we passed just before this section, got stuck (hit body panel) after my T4R cleans the same line!!!

The final 3 pics are me and my T4R stuffed and flexed at the bottom of the B line!
 

Attachments

  • TryHxy5m.jpg
    TryHxy5m.jpg
    15.3 KB · Views: 484
  • sUPYEHam.jpg
    sUPYEHam.jpg
    23.1 KB · Views: 502
  • WVkpFoSm.jpg
    WVkpFoSm.jpg
    24.7 KB · Views: 494
  • KbbPcWqm.jpg
    KbbPcWqm.jpg
    22.1 KB · Views: 372
  • ZliKT3Im.jpg
    ZliKT3Im.jpg
    23.1 KB · Views: 353
  • c6Gz0apm.jpg
    c6Gz0apm.jpg
    23.6 KB · Views: 337
Last edited:
Got my BFG A/T KO2's mounted...they're sweet. They're almost silent and so smooth riding. I went with 275/70r18.


Sent from my iPhone using Tapatalk
 
c20b2dae155a69ba408adc441c9cbbdd.jpg
fa9f0e947029c8a2a41bd7bcba513ddd.jpg

I went back and forth on aligning them with the top of the bumper or the sides I did the sides because and moved them toward center because I didn't want any gaps and the bumper really curves toward the sides.


Sent from my iPhone using Tapatalk
 
Good enough!
Waxed most paint under the hood - including underside of it.
Used 303 on any visible/reachable plastic.
Used Meguires Back to Black on any visible/reachable rubber.
Cleaned under the engine cover and washed/waxed it, too.

az07runner-albums-az07runner-picture39438-engine-detail-4.jpg


az07runner-albums-az07runner-picture39439-engine-detail-5.jpg
 
Good enough!
Waxed most paint under the hood - including underside of it.
Used 303 on any visible/reachable plastic.
Used Meguires Back to Black on any visible/reachable rubber.
Cleaned under the engine cover and washed/waxed it, too.

az07runner-albums-az07runner-picture39438-engine-detail-4.jpg


az07runner-albums-az07runner-picture39439-engine-detail-5.jpg


What did you use on the engine?
 
Good enough!
Waxed most paint under the hood - including underside of it.
Used 303 on any visible/reachable plastic.
Used Meguires Back to Black on any visible/reachable rubber.
Cleaned under the engine cover and washed/waxed it, too.

az07runner-albums-az07runner-picture39438-engine-detail-4.jpg


az07runner-albums-az07runner-picture39439-engine-detail-5.jpg
It's beautiful

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Replaced the POS Energy front SB bushings and brackets. They only lasted 6 months.

I went back to OEM.

Here are the POS bushings.

lxaHxJl.jpg


And here is the new toy I got to use. 700 ft/lb tighten and 1200 ft/lb loosen torque!!

oIcpxM2.jpg
 
Well in looking at some good steps for my rig, I asked the seller about the steps( on Facebook) only to notice in his pictures my 4runner! So this is thr original owner of my ride, oh the questions I have, I asked about the steps then nicely asked about my ride, no response for either... brain immediately goes to bad reasons he won't answer.....Damn

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,114
Members
248,016
Latest member
Advally Service

Trending content

Back
Top