What did you do with your 4runner today?

Do the coil packs have a replacement interval?

I know it's apples/oranges but I just replaced them in my N54 and it runs a lot better.
 
t-man said:
I can't say for sure but if I remember correctly they are the standard 10mm bolt that is used throughout various parts of the body. Pull one off the fender under the hood and see if it threads in.
Click to expand...

I tried several to no avail. Could have sworn they were bigger though. Eh, I could be mistaken. It's been over a year now.

DisguisedRope said:
Something like this might be helpful to have around for these situations.
Click to expand...

I will be investing in this. Thank you sir!
 
Testing out my new custom rack. uploadfromtaptalk1462387890056.jpg
 

Attachments

  • uploadfromtaptalk1462387890056.jpg
    uploadfromtaptalk1462387890056.jpg
    125.7 KB · Views: 571
heiser said:
Well, I replaced the spark plugs, which were quite old. The previous owner didn't have spark plug replacements listed on his log so not sure when the last change was.

Then, I made a second attempt at replacing the upstream air/fuel sensors; this time through the wheel well. Turns out it's ridiculous no matter which way you go and I could not get an angle or leverage from any direction. I gave up on that job.

The brake caliper looked gross, so I cleaned and greased it. Hopefully it's not frozen again
Click to expand...

I just replaced my O2 sensor (driver side) and I found it easier to jack up the truck and hit it from there. I also used a 3/4" 18" ratcheting breaker bar. A couple of 1/4 turns later I was able to unscrew the sensor by hand. Good luck.
 
2003-4x4runner said:
I just replaced my O2 sensor (driver side) and I found it easier to jack up the truck and hit it from there. I also used a 3/4" 18" ratcheting breaker bar. A couple of 1/4 turns later I was able to unscrew the sensor by hand. Good luck.
Click to expand...
Did you go from underneath, wheel, or top?

Seem's like I might need a longer breaker bar then. My 12" bar isn't helping much.

EDIT: Nevermind, saw your post in the other thread. You went from underneath. Thanks!
 
Last edited:
Got a pic of the emblem on my grill set up as my HU wallpaper. Looks better in person; the color inside the letters is washed out in this image.

IMG_4141_zpsjzoeberu.jpg~original
 
heiser said:
Did you go from underneath, wheel, or top?

Seem's like I might need a longer breaker bar then. My 12" bar isn't helping much.

EDIT: Nevermind, saw your post in the other thread. You went from underneath. Thanks!
Click to expand...

Also, get a longer breaker bar. The 18" bar I used worked great and I think a longer bar would have been better but they didn't have any longer bars that were Ratcheting.
 
New User

So this is my first time on this forum. Can anybody tell me how to create a post where people can answer back? I tried to make one but it told me I wasn't allowed to. Thanks!
 
2003-4x4runner said:
Also, get a longer breaker bar. The 18" bar I used worked great and I think a longer bar would have been better but they didn't have any longer bars that were Ratcheting.
Click to expand...

It doesn't seem like 3/8 24" breaker bars are common. I don't think I could fit a 1/2 24" bar with a 1/2 to 3/8 adapter because there's not really enough room. I might go to HF and pick up the same 18" one you have
 
Gosh, you quoted the wrong guy on your 7,000th post [MENTION=165]momo.75[/MENTION] :p
[MENTION=140803]T4RBoi123[/MENTION]
 
You must log in or register to reply here.

Similar threads

F
Extended Lower Control Arms for 4th Gen?
Replies
4
Views
45K
aemravan
A
0
New 03 4.7 with over 300k miles questions.
Replies
19
Views
3K
04run&gun
0
B
Opinions needed related to my fuel pressure loss vapor lock issue..
Replies
12
Views
4K
JustTroItIn
JustTroItIn
T
2001 4runner Head Gasket Replacement
Replies
19
Views
16K
alia176
A
F
3rd gen 4runner cooling question.
Replies
19
Views
4K
gh25_
gh25_

Members online

Total: 7,284 (members: 1, guests: 7,283)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top