What did you do with your 4runner today?

Cleaned the engine bay today (was much needed ). See the before and after.
 

Attachments

  • 20181104_130801.jpg
    20181104_130801.jpg
    138.9 KB · Views: 336
  • 20181104_141410.jpg
    20181104_141410.jpg
    140.4 KB · Views: 342
Fixed my clunk
Found the problem
7d63a2f18088a4d2ab0eb8134e383793.jpg
KIMG0022.jpeg
Also threw in some new cv's
New ujoints on front shaft


Sent from my E6810 using Tapatalk
 

Attachments

  • KIMG0022.jpeg
    KIMG0022.jpeg
    58.9 KB · Views: 339
well it was yesterday, if you guys follow the facebook post, did my valve cover gasket and also spark plugs and a new belt tensioner. cleaned up the throttle body and maf sensor. looks like my filter might need a cleaning also, to do the belt tensioner, make sure to unbolt the ac line bracket on the left of engine, this way, itll give you more room to move the compressor out the way, also needed to remove the front skid plate to do the compressor.
everyone says i have some very clean no sludge. all mobil 1 extended oil with the m1-209 filter (bigger), this is at 10k intervals.
IMG_20181103_154523.jpg

IMG_20181103_154534.jpg

IMG_20181103_173922.jpg

IMG_20181103_173933.jpg
 

Attachments

  • IMG_20181103_154523.jpg
    IMG_20181103_154523.jpg
    144.5 KB · Views: 332
  • IMG_20181103_154534.jpg
    IMG_20181103_154534.jpg
    144.7 KB · Views: 360
  • IMG_20181103_173922.jpg
    IMG_20181103_173922.jpg
    147.3 KB · Views: 341
  • IMG_20181103_173933.jpg
    IMG_20181103_173933.jpg
    148.9 KB · Views: 336
Replaced my rear window wiper arm. Nothing major but something.

It was fairly major when I did mine. The thing was so corroded/frozen to the shaft that I had to cut the arm off and use a dremmel to cut the bushing off so I could replace it! Took almost an hour total, instead of 5 minutes due mostly to having to drag out tools that shouldn’t have been needed for a wiper change!
 
Found some little turds in the glovebox and rear drawers, left a cliff bar in there to hide from the dogs a couple weeks and forgot about it. Went full Rambo. 10 traps and a couple hours later, got the little bastard!

a1db613e5ee422212b6fe865453135da.jpg
 
Last edited:
Found some little turds in the glovebox and rear drawers, left a cliff bar in there to hide from the dogs a couple weeks and forgot about it. Went full Rambo. 10 traps and a couple hours later, got the little bastard!

a1db613e5ee422212b6fe865453135da.jpg

Congratulations on a successful hunt!!

Leave the traps in there for a bit longer, a lot of times where there's one there's more!!
 
Congratulations on a successful hunt!!

Leave the traps in there for a bit longer, a lot of times where there's one there's more!!

That's what everyone's been telling me. Still have 10 traps set in there, no more mice or new turds anywhere but I'll leave it be another couple days.
 
Let there be light

Did this. Makes it a lot easier to operate at night
 

Attachments

  • IMG_6460.jpg
    IMG_6460.jpg
    124.9 KB · Views: 297
  • IMG_6457.jpg
    IMG_6457.jpg
    63.6 KB · Views: 289
  • IMG_6458.jpg
    IMG_6458.jpg
    57.2 KB · Views: 300

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top