I am currently running on stock 17x7.5 30 offset wheels and have about 1/2” clearance from the upper control arms. I am looking at some 17x8.5 0 offset and 4.75 BS wheels. Would these wheels put me closer or further from the upper control arms? I don’t want to run spacers. I appreciate the help.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Wheel sizing help needed
- Thread starter Racso
- Start date
Register to hide this ad
randyjohnsonstl
New member
I think you need current backspacing to determine.
Or you can take off wheel and measure back 4.75 from the hub, then go up and out 4.25?
Not really sure of any way than measuring it
Or you can take off wheel and measure back 4.75 from the hub, then go up and out 4.25?
Not really sure of any way than measuring it