windsheild washer reservoir swap from a tacoma

grantprior13

grantprior13

New member
Has anyone done the Tacoma washer reservoir swap? Heard if you swap a tank from a tacoma it wont show the washer reservoir if you have an aftermarket bumper. If anyone has pictures or a link of the actual part needed for the swap that would be amazing. :help:
 
Register to hide this ad
The only downside to my mod was the size of the container. Should of used a larger one. But I haven't taken the time to replace it either
 
05+ Tacoma reservoir. About $40 on eBay from the aftermarket.

I've been trying to find a wrecked taco for an oem version because....well, Toyota.

In the mean time I've just painted my bottle black so it's not as obvious hanging behind the Demello bumper.
 
JimInTN said:
05+ Tacoma reservoir. About $40 on eBay from the aftermarket.

I've been trying to find a wrecked taco for an oem version because....well, Toyota.

In the mean time I've just painted my bottle black so it's not as obvious hanging behind the Demello bumper.[/QUOTE]

Been doing the same thing for years. SEM trim black over the whole thing and it blends right in. Surprisingly my bottle hasn't been damaged yet either, so I'll likely not put much effort into swapping it until that happens.
Click to expand...
 
JimInTN said:
I've just painted my bottle black so it's not as obvious hanging behind the Demello bumper.
Click to expand...

Same with my Shrockworks, a rattle can works fine and is a lot cheaper than $40.00. Years without damage says it's the way to go.
 
about ready to start the relocate

grantprior13 said:
just ordered the one with the pump.. I'll post some pics when i get it installed and my bumper installed next month.. :tea:
Click to expand...

Hey, I'm in the same position as you. Any info on the washer bottle relocate would be extremely helpful. I'm relatively new to working on vehicles and have a demello on order. Don't really want the washer bottle hanging exposed.
 
williamteichroeb said:
Hey, I'm in the same position as you. Any info on the washer bottle relocate would be extremely helpful. I'm relatively new to working on vehicles and have a demello on order. Don't really want the washer bottle hanging exposed.
Click to expand...



Yes.. the Tacoma bottle does not work I found that out the hard way.. I bought this one off amazon and just mounted it.. works great and is hidden perfectly under the hood!
d29bb2a98cba6d9853488a8e92df5825.jpg



Sent from my iPhone using Tapatalk
 
grantprior13 said:
Yes.. the Tacoma bottle does not work I found that out the hard way.. I bought this one off amazon and just mounted it.. works great and is hidden perfectly under the hood!
d29bb2a98cba6d9853488a8e92df5825.jpg



Sent from my iPhone using Tapatalk
Click to expand...

Thanks for getting back to me, you saved me finding out the hard way as well. That bottle does look small. however I guess I'd be able to live with it. Would I be able to trouble you for pics, or any tips for when I begin the project. Were you able to use this without losing function of the rear window washer port? Really appreciate the help, and I'll pass it along to the next guy! Maybe I'll do a full writeup to help other noobs like me once I'md one :)

Cheers!
 
williamteichroeb said:
Thanks for getting back to me, you saved me finding out the hard way as well. That bottle does look small. however I guess I'd be able to live with it. Would I be able to trouble you for pics, or any tips for when I begin the project. Were you able to use this without losing function of the rear window washer port? Really appreciate the help, and I'll pass it along to the next guy! Maybe I'll do a full writeup to help other noobs like me once I'md one :)

Cheers!
Click to expand...

I had a shop by my house install it and they were able to customize it to keep the front and rear working
 
grantprior13 said:
Yes.. I can post some later


Sent from my iPhone using Tapatalk
Click to expand...

Would love to see some install pics. I just bought a Tacoma reservoir today from a junkyard only to find out that it doesnt even remotely fit.

Still might cut down the Tacoma tank though and plasti-weld it back together. The seam would be at the top of the tank where the filler cap is so I don't think leaks would be a problem.
 
rickashay said:
Would love to see some install pics. I just bought a Tacoma reservoir today from a junkyard only to find out that it doesnt even remotely fit.

Still might cut down the Tacoma tank though and plasti-weld it back together. The seam would be at the top of the tank where the filler cap is so I don't think leaks would be a problem.
Click to expand...

Yes the tacoma reservoir was definitly a failed attempt that was no where close to correct on my end.. I read something on other forums about it but I had no luck what so ever.. ended up going a different direction with a universal reservoir from amazon I posted earlier..
 
You must log in or register to reply here.

Similar threads

H
Front lift help
Replies
4
Views
4K
riceandpho
riceandpho
T
3rd Gen Rear Diff compatibility information?
Replies
5
Views
2K
triangles
T
R
Auto Temp Control / Dual Zone Swap in a 2024
Replies
1
Views
2K
louisethomp
L
D
Help Me Make Sense of it all
Replies
5
Views
2K
djw54
D
alirawk
New Goodies for the Rig
Replies
1
Views
1K
RO1973
RO1973

Members online

Total: 3,062 (members: 5, guests: 3,057)

Forum statistics

Threads
278,317
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top