1engineer
Moderator
hmmmm this forum is like the many other forums
flame on and never any helpful advice
Go back and re read my last post.
hmmmm this forum is like the many other forums
flame on and never any helpful advice
Jesus people, let's get this straight, ok?
ALL 5TH GEN BRAKES ARE EXACTLY THE SAME. EVERY ONE EVER BUILT HAS EXACTLY THE SAME PADS, ROTORS, ETC.
EVERY ONE. SAME.
I'm out now.
Edit: OP after reading your last post it sounds like you are hitting the brake too fast. Try going down the street and hitting the brakes with a slower steady pressure. Now do the same only tap them really quick like a panic stop. You will feel a huge difference.
the brakes have no initial grab, low coe pads maybe? then it transitions to panic stop mode and no i am not tailgating or speeding or driving like an idiot as some of you seem to think, i drive this fairly calmly as its my child transport also, not that i don't drove spirited when he's in the evo either. For a 4 piston system it has horrible feel, no initial grab and its absolutly vague.
trust me i know brakes, think 170-180 in a mazda kudzu or gt3 porsche into turn one at daytona...you need them to make that turn at that speed. I'm sure most of you have never done that or even that speed...
as for the nosedive thats a suspension issue and related to the rake that the truck came so gloriously with...
all i asked was brake pad upgrades, not a dissertation on my supposed lack of driving skills
rant over
You know, you are like the 50th guy to come here and tout your racing pedigree and complain about something wrong with the 4Runner. Unless you race F1 or IndyCar or Prototype then you are just a poor slob like the rest of us with an expensive hobby. Face it, if you almost hit someone in the ass you were too close to them.
Those of you complaining about barely pressing the pedal and activating brake assist: It's the speed of actuation not the force of actuation that activates it. Slow it down a bit and it acts like normal brakes. Panic and hit it fast and your whole world stops.
Edit: OP after reading your last post it sounds like you are hitting the brake too fast. Try going down the street and hitting the brakes with a slower steady pressure. Now do the same only tap them really quick like a panic stop. You will feel a huge difference.
I hear that Performance Friction Carbon Metallic pads are good with Brembo rotors.
![]()
i do press slow and nothing happens and keep pressing and still I'm not slowing down until i have to literally slam it to stop...i average 4-5 truck lengths in almost all traffic...
running with the BMW clubs i have driven the X6M's which i believe is about the same weight
nj is not all city. i live by the beach.
I saw EBC yellows also. Ive had experience with EBC also. ill look into those also
Exactly. All these people that think the 5th gen 4runner has great brakes must not have ever driven anything that even has decent brakes, much less good ones. That's how bad the brake feel is on these vehicles. The worst of any modern vehicle I have ever driven.
Op has it right, top of the pedal does nothing, middle of the pedal does nothing and then all the sudden they slam on with full force. The engagement and feel is pathetic.
I have no issue with stopping power once they actually "engage", it stops well enough. Just the feel and engagement is awful, and honestly I can't believe Toyota let this pass.
If this was my dd I would have already swapped out pads, lines, booster and master cylinder. I would do everything I could to try to make them better.
Am I the only person that thinks the brakes on the 4Runner are great for off-roading? If they were more sensitive, I'd hate it. Having more of a squishy feel and more travel before generating serious stopping power allows me to use braking finesse more easily when working my way over rocks and small boulders.