3rd Gen FAQ, Tutorials, & Documentation Reference

[ksroqclimber]

Maybe put this one in wheels so I don't always keep looking for it The link goes directly to 496 BB's write-up. I think it would be nice if the - welcome to the "new" subforum (from 6 years ago), mid-gen upgrades, and rear sag were dropped and this 'ultimate' thread was stickied instead. Makes sense to me at least. Fewer sticky's the better. At least there aren't as many as yotatech.
Wheel Painting

Add these too.
http://www.toyota-4runner.org/3rd-gen-t4rs/48552-about-rear-sag.html
http://www.toyota-4runner.org/3rd-gen-t4rs/44297-99-mid-gen-upgrades-w-pics.html

Added.

Thanks for suggesting these.

Also added the ToyotaReference.com Color Chart.

Moderators, Is there a way to have a post that includes more than 11 pics (or whatever the current max is)? It is limiting my thread format. all my pics are 40k or less in size aside from the color code (which is only 180k) I created them this small so the thread would load quickly even with alot of them.

:beer:

 

[Nelsonmd]

Here is a supplement to the drive shaft grease article. I don't think anyone has posted it. Seems like some pretty good info.

Mobil 1 synthetic grease nlgi no 2

 

[Shoke]

can we get a sticky already... cause this thread = :trophy:

:iagree: Sticky!!

 

[ksroqclimber]

Here is a supplement to the drive shaft grease article. I don't think anyone has posted it. Seems like some pretty good info.

Mobil 1 synthetic grease nlgi no 2

Added to "Rearend section"

More good info on lubing the driveshaft.

Thanks

 

[theizzardking]

bump becuase this should be a sticky in the first place :banana:

 

[creatix]

Another bump for the most valuable thread waiting to be glued to the top :guitar3:

 

[152 Sumo]

another bump....

 

[blcktpgsr]

I could either just Bookmark this Thread or find it in the Sticky section...ok I also vote for Sticky!:iagree:

 

[driffter33]

Hooo raaa its stuck

 

[admin]

This has been "superstickied" too, link available on the home page under "3rd gen T4Rs".

 

[builditbreakit]

Thanks admins

Dang finally sticky awesome. Got tired of trying to find it

 

[zcruiser]

Any chance of removing all the 'bumps' and 'please sticky' appeals?

 

[theizzardking]

brian2suns thread on the types of 4x4 in our trucks, if this isn't already here it should be and if it is, it deserves to go up twice.

http://www.toyota-4runner.org/3rd-g...rs-3rd-gens-transfer-case-awd-multi-mode.html

 

[ksroqclimber]

brian2suns thread on the types of 4x4 in our trucks, if this isn't already here it should be and if it is, it deserves to go up twice.

http://www.toyota-4runner.org/3rd-g...rs-3rd-gens-transfer-case-awd-multi-mode.html

Added it to the transmission area. However, in hind sight should probly go in rearend. Willchange when I am at a pc an not my phone.

Thanks!

 

[bootown]

You should add this link next to the Cleaning MAF link you already have:

4Runners.org - Cleaning Your Throttle Body and MAF

 

[Nelsonmd]

Here are a couple more I don't see there.

Lower and Upper Ball Joint Replacement
R&R Upper and Lower Ball Joints - TTORA Forum

Steering Column Slip Joint Play - Steering Wobble Fix
Diagnose and Fix Steering Play/Rattle - TTORA Forum

 

[jesfranco]

Hello my friend!

The 2000 owners manual help me a lot! Thanks for you post!

Jesus Franco
Puerto Rico

 

[ksroqclimber]

Added the MAF Cleaning article from 4Runners.org.

Unfortunately, posts are limited to 15K characters. I have reached my limit for the original post. I was unable to add the Ball Joint thread and steering play thread. So if anyone has any suggestions I am all ears. I could split it into to posts, but the second post wouldnt show up below the first, it would show up at the end of the thread.

Any ideas?

Anyone know who the moderator is for this forum? I sent admin a message, but wanted to hit up the mod as well.

Ks

 

[zcruiser]

Unfortunately, posts are limited to 15K characters. I have reached my limit for the original post. I was unable to add the Ball Joint thread and steering play thread. So if anyone has any suggestions I am all ears. I could split it into to posts, but the second post wouldnt show up below the first, it would show up at the end of the thread.

Any ideas?

Ks

You could trim out a lot of repetitive strings and probably save a lot of characters...

Owners Manuals

* 1996 Owners Manual
* 1997 Owners Manual
* 1998 Owners Manual
* 1999 Owners Manual
* 2000 Owners Manual
* 2001 Owners Manual
* 2002 Owners Manual

to just

Owners Manuals

* 1996
* 1997
* 1998
* 1999
* 2000
* 2001
* 2002

Stuff like that...

 

[hymers]

I know you were on today. I'm a new member and can't figure out how to post a new message. I know how to reply as I did now but how to post a new message within a thread escapes me. You can email me at [email protected] as well. Thanks. for your help.