42s 2000 Sport build

So instead I pulled the plug that's in the roof under the end cap, used a step drill to open it up a little. Then installed a rubber grommet to run the wires thru, I put a dab of cone around the wire as well just for shitts and giggles.
 

Attachments

  • IMG_0122.JPG
    IMG_0122.JPG
    122.4 KB · Views: 758
  • IMG_0123.JPG
    IMG_0123.JPG
    121.2 KB · Views: 769
  • IMG_0124.JPG
    IMG_0124.JPG
    130 KB · Views: 763
  • IMG_0121.jpg
    IMG_0121.jpg
    47.9 KB · Views: 772
Now it was time to work on the end cap. I used a carbide 1/4" burr to notch the end cap for the wire. Added a little silly cone to the cap to seal it as much as I could. From there I just ran the wires along the roof down the A pillar with the rest of the wires.
 

Attachments

  • IMG_0120.JPG
    IMG_0120.JPG
    97.5 KB · Views: 750
  • IMG_0127.JPG
    IMG_0127.JPG
    130.5 KB · Views: 750
  • IMG_0126.jpg
    IMG_0126.jpg
    62.6 KB · Views: 747
To finish it off I installed a weather pack connector, just to make it easier to remove the rack if I need to. I've never done a weather pack connector before...Not as bad as I thought.
 

Attachments

  • IMG_0136.JPG
    IMG_0136.JPG
    126.9 KB · Views: 745
  • IMG_0137.JPG
    IMG_0137.JPG
    116.2 KB · Views: 747
So that's it on that for this weekend. I did drill the rack and fish some wire thru the rack to be able to pull the actual wires thru this week. While I had the interior out I ran the CB wire...No pics, it wasn't anything special...

I did put in some new floor mats
 

Attachments

  • IMG_0138.JPG
    IMG_0138.JPG
    128.2 KB · Views: 752
Next project was putting in the roll bar. No actions pics, but it was nothing special either. Mark and drill holes, put bolt in, tighten....Repeat. Any way here is the finish product. Looks ok, the drawer opens up with out hitting the rear gate, which is nice. Plus it gives me enough room for all my crap.
 

Attachments

  • IMG_0128.JPG
    IMG_0128.JPG
    131.6 KB · Views: 761
  • IMG_0131.JPG
    IMG_0131.JPG
    99.8 KB · Views: 746
  • IMG_0132.JPG
    IMG_0132.JPG
    110.8 KB · Views: 750
  • IMG_0141.jpg
    IMG_0141.jpg
    75.6 KB · Views: 744
I did, I sprayed them both at the same time.
 

Attachments

  • crap 120.jpg
    crap 120.jpg
    95.3 KB · Views: 755
  • crap 144.jpg
    crap 144.jpg
    68.4 KB · Views: 734
So last night I got the wiring done on the roof rack. Wanted a clean look so I ran all the wires in the rack tubes.
 

Attachments

  • image.jpg
    image.jpg
    137.5 KB · Views: 709
:faint2: Wow! I love this rig, this is great!

You're making me really jealous right now, I'm going to start building my rig here pretty soon.
 
I have to ask did that touch screen radio work at one point? And what part number is it (if it did work)?

Yea the touch screen works fine. Has back up camera and all. I'm taking it out, I'm not real impressed with it. Got a new one on order, should be here Monday. Not sure what the part number is, sorry
 
Couple more shots of the finished product and of some of me working on it Friday night.
 

Attachments

  • image.jpg
    image.jpg
    135.1 KB · Views: 808

Members online

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Trending content

Back
Top