4runner TRD Pro

[NewguyNY]

It's based off a FJ drop kit, I had it adjusted down so it's about 5 " even with the 75 ratios. rides awesome but it's not a DIY. I have to take it in after a couple of weeks. If you want I can ask if they recommend a shop by you. You can probably get these tires in there with an icon or toytec leveling kit but you basically push down on your front suspension and load up you coils. With this the front rods maintain the factory angle. You will also probably meet to trim at 3".

That would be great if they know a shop in the Syracuse NY area. Been thinking about toytec and I'll probably end up there if I can't find a better solution.
Replacing front bumper this week so aside from BMC no no trimming should be needed. Thanks!

 

[TRDPRO]

That would be great if they know a shop in the Syracuse NY area. Been thinking about toytec and I'll probably end up there if I can't find a better solution.
Replacing front bumper this week so aside from BMC no no trimming should be needed. Thanks!

Will do. Love to see the new number.

 

[Hybryd40]

the quicksand one from ed martin is sitting in my driveway saw it posted the day it came off the truck and i was in indy that day, and ran over there.

nice

 

[eliminator]

On most vin decoders, including my insurance agent's, mine pulls up as an SR5. I imagine that's why they have it listed that way.

Indeed, when I went to get insurance on my TEP last week the options in the system were: SR5, SR5 Sport, SR5 Outlander (WTF?) and SR5 Limited.

 

[SKINUM]

Indeed, when I went to get insurance on my TEP last week the options in the system were: SR5, SR5 Sport, SR5 Outlander (WTF?) and SR5 Limited.

Same issue they ran into when the FJC was introduced. My insurance company listed the FJC as a Land Cruiser.

 

[Shaolin]

Installed the Spidertrax wheel spacers today. No rubbing but cutting it pretty close.

 

[Shaolin]

Bottom left. Passenger mudguard with the steering wheel fully locked to the right. Bottom right driver side front bumper corner with the steering wheel fully locked to the right.

 

[rallybabyracing]

Finally got around to removing the TRD Pro emblem and wrapping the roof rails. Very pleased with the results.

 

[turdpro]

What do you wrap the rails with?

 

[codyHTX]

Bottom left. Passenger mudguard with the steering wheel fully locked to the right. Bottom right driver side front bumper corner with the steering wheel fully locked to the right.

cool! lets see some pics of the whole truck too!

 

[codyHTX]

Finally got around to removing the TRD Pro emblem and wrapping the roof rails. Very pleased with the results.

nice, silly they black out the F/R valences but leave the silver roof rails, shoulda been like that before it got on the boat.

 

[rallybabyracing]

What do you wrap the rails with?

3M satin black

 

[dcsleeper408]

sell me your emblems !! [MENTION=121995]rallybabyracing[/MENTION]

 

[fusionz06]

Looking for running boards for new TRD Pro

Just recently got a 2016 TRD Pro in Super White and the wife definitely needs the running boards.

Where can I purchase these running boards?

 

[rallybabyracing]

I took mine off the day I bought the truck. Where are you located?

Just recently got a 2016 TRD Pro in Super White and the wife definitely needs the running boards.

Where can I purchase these running boards?

 

[fusionz06]

I took mine off the day I bought the truck. Where are you located?

I am in the Tampa Bay area of Florida. I'll gladly pay to have them shipped down here and a little more for your time

 

[SirBarton]

Finally got around to removing the TRD Pro emblem and wrapping the roof rails. Very pleased with the results.

I love that you took the TRD Pro emblems off. And the wrap looks great.

 

[SKINUM]

I am in the Tampa Bay area of Florida. I'll gladly pay to have them shipped down here and a little more for your time

Purchasing them from another owner is your only option for this particular type of running board.

 

[fusionz06]

Purchasing them from another owner is your only option for this particular type of running board.

Well, let's hope I can find some in this thread!

 

[Inferno1]

Wahoo another tampa dude