4th Gen specific for sale thread

[Nyc-Runner]

- Complete Axle assembly and 3rd member 3.73 gear ratio -
$700
Located- NYC,Upstate,New england

 

[Bellatidusskyebeur]

Toytec adj. Coilovers and rear 5100's

SALE PENDING.....
I have a pair of new toytec adjustable coilovers ( except for the red coils,those are 6 mths used,everything else is new)
Also a set of new rear 5100's.

I bought these with every intention of installing, and continuing my project, but life threw a curve ball and there just sitting in the spare room.
Asking 750.00 for it all
Im located in Denver and prefer a local sale, but not opposed to shipping if need be.
Thanks!

 

[green_manalishi]

FREE running boards off a 2004 SR5. Mounting bolts not included (easily replaced at your local hardware store) and the drivers side has some lite rock damage. Will post pics if interested.

Local Denver pickup only.

Updated: Sold

 

[SteelStacks]

I have a pair of new toytec adjustable coilovers ( except for the red coils,those are 6 mths used,everything else is new)

Also a set of new rear 5100's.



I bought these with every intention of installing, and continuing my project, but life threw a curve ball and there just sitting in the spare room.

Asking 750.00 for it all

Im located in Denver and prefer a local sale, but not opposed to shipping if need be.

Thanks!

Pm sent!


Sent from my iPhone using Tapatalk

 

[Oneluv13T4R]

Rebuilt 07 4wd FJ Cruiser UCA's

I have a pair of 07 4wd FJ Cruiser upper control arms in mint condition that I have rebuilt with all new black energy suspension bushing's etc...
All of which was properly pressed in and pressed out not banging on them no marks on them that's factory original paint. Even test ran the, for 500 miles nice quit and stiff they feel amazing and really made a huge difference that I didn't realize it was gonna have that much of an effect. So that tells me how bad my other UCA condition are. Which I will be rebuilding those as well.
Price $100 bucks +shipping.

If your uca's are shot and your below the 3" lift mark these are for you

 

[neoguri]

FS: arb old man emu 5 mm trim packer

$10 shipped.

 

[calvinv8sr5]

$10 shipped.

?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[sigepbiker]

2003-2005 Instrument Cluster
SR5 4x4
~90K miles, no cracks.
$100 + shipping
Located in Denver

Since this thread is hard to follow, PM me with questions or for pics.

 

[Izlu]

I have a pair of 07 4wd FJ Cruiser upper control arms in mint condition that I have rebuilt with all new black energy suspension bushing's etc...
All of which was properly pressed in and pressed out not banging on them no marks on them that's factory original paint. Even test ran the, for 500 miles nice quit and stiff they feel amazing and really made a huge difference that I didn't realize it was gonna have that much of an effect. So that tells me how bad my other UCA condition are. Which I will be rebuilding those as well.
Price $100 bucks +shipping.

If your uca's are shot and your below the 3" lift mark these are for you

View attachment 201199

Shipping to 90501?

 

[Oneluv13T4R]

Shipping to 90501?

18.75 for large flat rate box from 92240 to 90501 usps priority mail

 

[K_Labs]

Transfer case shift actuator seals from colonial seal. FREE I have a total of 5 left.

http://www.toyota-4runner.org/4th-gen-t4rs/182074-fixing-transfer-case-shift-motor-leak-within.html

It's the seals that go around the 2 shafts on the actuator if you scroll down in the post above he shows how to remove them and what the old and new ones look like a little further down

 

[Izlu]

Transfer case shift actuator seals from colonial seal. FREE I have a total of 5 left.

Any pics?

 

[runner mike]

wtb 3" lift

I am looking to buy a 3" lift kit for my 08 and if you have some rims and tires I might be interested in that as well.

 

[SoSoRunner]

I have a pair of new toytec adjustable coilovers ( except for the red coils,those are 6 mths used,everything else is new)
Also a set of new rear 5100's.

I bought these with every intention of installing, and continuing my project, but life threw a curve ball and there just sitting in the spare room.
Asking 750.00 for it all
Im located in Denver and prefer a local sale, but not opposed to shipping if need be.
Thanks!

Would you be willing to just sell the rears bilstein shocks separately?

 

[Bellatidusskyebeur]

Would you be willing to just sell the rears bilstein shocks separately?

Yes. I currently have someone inquiring about that. If nothing develops, i'll let you know asap.

 

[cajone5]

Can't find the PM from the guy who wanted my OEM headlights. They are only about a month or two out from a wet sanding and polish (DIY kit). They look great but I replaced them with blackout headlights.

OEM Headlights (03-05 4th gen) $85 paypalled/shipped for the set.

OEM 4th gen Running boards $40 local pick-up in south Austin.

 

[A10MileHusker]

I have a hitch receiver off of my 2005 V8 4Runner as well as stock front sway bar.

PM if interested!

 

[CAMELPRO]

3" ToyTec spacer NIB

I am looking to buy a 3" lift kit for my 08 and if you have some rims and tires I might be interested in that as well.

I have the ToyTec 3" spacer lift still new in the box. It's $169 + $13.62 shipping from ToyTec. I'll take $135 shipped if interested.

Front 3" lift Spacers

 

[SoSoRunner]

Yes. I currently have someone inquiring about that. If nothing develops, i'll let you know asap.

Ok great thanks! I currently already have 5100s all around but I think my rears are beginning to leak, I noticed some oil stains on the bottom of the dust boots.

 

[sweetcheek316]

4th Gen Homelink Map Light Assembly.. $75 INCLUDES SHIPPING OBO USED 2 MONTHS

Bought new and decided I really don't need the homelink feature. Everything works perfect.

Stone color.

Part #- 63670-0W041-B0.


$75 INCLUDING shipping from 67202.

PayPal only.



Thanks