jimster716
New member
Jimster716's TEP NoPro *updated 5/21/16
Updated 7/30/16
Hi all,
Been lurking here for a couple of months. Doing a lot of research on the T4R and a lot of links were to this site. After unsuccessfully trying to get a TRD Pro without paying $5-8K over MSRP here in socal, decided to go for the Trail Edition Premium and even that was hard to source.
Anywho, this past Saturday picked up my silver TEP with 1 mile on the odometer and drove it during the weekend and dropped it off at the shop yesterday for a lift and wheels/tires with about 80 miles on the odometer.
Lift: Toytec Bilstein 5100 3" lift
UCA: Total Chaos
Wheels: ATX AX195 Cornice 17x9 -12 offset w/ 4.53 b/s
Tires: Cooper STT Pro 285/70/17
Sliders (on order): Metal Tech
After having the lift and wheels/tires installed, there was rubbing. Removed the front mudguards. I only detect rubbing in reverse with the wheel turned now. It doesn't particularly bother me.
Tire noise is quite apparent. Cooper had improved their compound with 30% silicate IIRC for on-road improvement and traction under multiple conditions. Reviews sounded positive and even stated that this was a capable and pleasant on-road tire. I'm not sure if they were comparing them to swamp tires cuz in comparison to the GY Duratracs and Hankook MT03's I had on my FJ Cruiser, these are noticeably louder. But they look mean AF and I'm looking forward to hitting some trails with some buddies.
Just waiting for the sliders and maybe order some RCI skid plates for now. At some point I'd like to get a roof rack as well.
I hope you like and I look forward to contributing to the community and attending some meetups in the future.
Added the Auer Automotive 2 in 1 LED DRL and Fog Combo today.
Nice switch
Just DRL
Also got 18% ceramic tint for driver and passenger window since I park under the CA sun.
Also has an homage to my little 5 month old Stormpooper I got this.
UPDATE: 5/7/16
RCI front skid plate. Primered and painted last night. Mounted today. One man job.
Added the Nox Lux emblem black out kit. The instructions include a statement saying if you're uncomfortable to have these installed by a professional. If you can't figure out how to attach emblem overlays that already have 3M tape, then step away from your 4Runner and never touch it again including locking/unlocking doors.
Installed my Metal Tech sliders. Extremely well designed. KDSS wasn't an issue, just unbolted two bolts for the lines and slid the mounting plates behind the lines. With Jack stands and floor jack it took me 2.5 hours by myself.
Added a rear diff breather running from the fuel filler area.
Installed RCI transfer case skid. 3/16" powdercoated steel.
Installed C4 Fabrication 3/16" powdercoated steel fuel tank skid.
Updated 7/30/16
Hi all,
Been lurking here for a couple of months. Doing a lot of research on the T4R and a lot of links were to this site. After unsuccessfully trying to get a TRD Pro without paying $5-8K over MSRP here in socal, decided to go for the Trail Edition Premium and even that was hard to source.
Anywho, this past Saturday picked up my silver TEP with 1 mile on the odometer and drove it during the weekend and dropped it off at the shop yesterday for a lift and wheels/tires with about 80 miles on the odometer.
Lift: Toytec Bilstein 5100 3" lift
UCA: Total Chaos
Wheels: ATX AX195 Cornice 17x9 -12 offset w/ 4.53 b/s
Tires: Cooper STT Pro 285/70/17
Sliders (on order): Metal Tech
After having the lift and wheels/tires installed, there was rubbing. Removed the front mudguards. I only detect rubbing in reverse with the wheel turned now. It doesn't particularly bother me.
Tire noise is quite apparent. Cooper had improved their compound with 30% silicate IIRC for on-road improvement and traction under multiple conditions. Reviews sounded positive and even stated that this was a capable and pleasant on-road tire. I'm not sure if they were comparing them to swamp tires cuz in comparison to the GY Duratracs and Hankook MT03's I had on my FJ Cruiser, these are noticeably louder. But they look mean AF and I'm looking forward to hitting some trails with some buddies.
Just waiting for the sliders and maybe order some RCI skid plates for now. At some point I'd like to get a roof rack as well.
I hope you like and I look forward to contributing to the community and attending some meetups in the future.
Added the Auer Automotive 2 in 1 LED DRL and Fog Combo today.
Nice switch
Just DRL
Also got 18% ceramic tint for driver and passenger window since I park under the CA sun.
Also has an homage to my little 5 month old Stormpooper I got this.
UPDATE: 5/7/16
RCI front skid plate. Primered and painted last night. Mounted today. One man job.
Added the Nox Lux emblem black out kit. The instructions include a statement saying if you're uncomfortable to have these installed by a professional. If you can't figure out how to attach emblem overlays that already have 3M tape, then step away from your 4Runner and never touch it again including locking/unlocking doors.
Installed my Metal Tech sliders. Extremely well designed. KDSS wasn't an issue, just unbolted two bolts for the lines and slid the mounting plates behind the lines. With Jack stands and floor jack it took me 2.5 hours by myself.
Added a rear diff breather running from the fuel filler area.
Installed RCI transfer case skid. 3/16" powdercoated steel.
Installed C4 Fabrication 3/16" powdercoated steel fuel tank skid.
Last edited: