alignment issues

[hawaiian_4runner]

ok i have a 97 t4r with 3" spacer lift ........... spun out with the runner and decided to rebuild the front end and the reason is when i drive forward the camber goes super positive and when reversing it straightens out ??? wtf replaced everything except UCA bushings could this be the issue???\:toilet:

 

[kammando808]

ok i have a 97 t4r with 3" spacer lift ........... spun out with the runner and decided to rebuild the front end and the reason is when i drive forward the camber goes super positive and when reversing it straightens out ??? wtf replaced everything except UCA bushings could this be the issue???\:toilet:

What island you on? Did you check your camber/caster bolts? You said you haven't touched the uca bushings, you should look into replacing the whole uca and get after market ones. Just installed these not too long ago and took me about 3-4 hours give or take to install myself Light Racing Adjustable Upper Control Arms Toyota 4-Runner 1996-2002

 

[hawaiian_4runner]

What island you on? Did you check your camber/caster bolts? You said you haven't touched the uca bushings, you should look into replacing the whole uca and get after market ones. Just installed these not too long ago and took me about 3-4 hours give or take to install myself Light Racing Adjustable Upper Control Arms Toyota 4-Runner 1996-2002

I'm on the big island , I installed new everything in the front end except UCA bushings , I was thinking of investing in aftermarket UCA but wanna make sure that if I change my bushings or arms it'll correct tha problem ?!?

 

[JRZEE2000TR4LTD]

Your LCA alignment adjustment cams must not be locked down.

 

[kammando808]

I'm on the big island , I installed new everything in the front end except UCA bushings , I was thinking of investing in aftermarket UCA but wanna make sure that if I change my bushings or arms it'll correct tha problem ?!?

I'm on the same island too, soo yah before you buy anything make sure to check the lca cam bolts, if you still deciding to get some uca's you should jump on this deal http://www.toyota-4runner.org/3rd-gen-t4rs/177014-gauging-interest-uca-group-buy-5.html

 

[hawaiian_4runner]

I'm on the same island too, soo yah before you buy anything make sure to check the lca cam bolts, if you still deciding to get some uca's you should jump on this deal http://www.toyota-4runner.org/3rd-gen-t4rs/177014-gauging-interest-uca-group-buy-5.html

i bought aftermarket , SPC cam bolts and theyre wayyy more solid than the stock cam bolts ill look that uo

 

[kammando808]

i bought aftermarket , SPC cam bolts and theyre wayyy more solid than the stock cam bolts ill look that uo

Where did you get them from? Did you install yourself?

 

[JBurt]

What do you mean by "way more solid"? Do they move less?

 

[hawaiian_4runner]

yeah installed myself ........ i realized my upper ball joints arent seating properly looks like theyre on the tip of the threads and this seems to be causing the play in the alignment ??

 

[hawaiian_4runner]

the spc cam bolts arent that lighter aluminum bolts theyre ****in stainless
steel ?? i guess