teotwaki
Senior Member
That is an extremely nice writeup with pictures! Thanks for sharing the link.
Another RED/WHITE Interior Lights Option
- Thread starter teotwaki
- Start date
- Status
That is an extremely nice writeup with pictures! Thanks for sharing the link.
Akkording
Member
Goodness that's cheap for full party mode Red for $66! It's worth in my opinion for that option, heck with the competitor it's considered an addtional upgrade cost. I only have the competitor's cabin dome light, very bright more than enough leds. It looks like they run less leds with this design but will be plenty bright.
teotwaki
Senior Member
Both companies have two separate strings of LEDs and they can be easily seen in the pictures and the parts list. In Arclight's design the red LEDs have a black look to them and the white LEDs look yellow. In CarTrim's the red LEDs have a white face to them.
What might be going on is the Chinese boards are possibly clones of the first generation ArcLight design with less LEDs. ArcLight's latest design has more LEDs squeezed in for even more light and their website says " We even managed to squeeze in an additional 8% more LEDS in what is already a super tight space!"
Last edited:
teotwaki
Senior Member
They are all shipping from China as far as I can tell. You just pay much more cash for shorter delivery
teotwaki
Senior Member
Minor mechanical skills to remove the dome covers, remove the stock filament bulb etc.
Follow emmantik's link to the detailed pictorial and decide if you can handle the steps for the hatch lights.
Icarus eXtreme LED Hatch Lights from ArcLightLEDs - 5th Gen 4Runner
VancouverRunner
New member
Lol. Sorry you guys are all butthurt.
Just use your heads for once. These guys are selling something so cheap that they beat even shittiest amazon leds in terms of prices. Then they add power blocks, switches, and sell them at fire sale prices.
The phrase too good to be true comes to mind. They’re probably a huge flaw with them and they’re trying to unload them ASAP. Hope all of you paid influencers consciences are clear once the reports of fires start rolling in.
Just use your heads for once. These guys are selling something so cheap that they beat even shittiest amazon leds in terms of prices. Then they add power blocks, switches, and sell them at fire sale prices.
The phrase too good to be true comes to mind. They’re probably a huge flaw with them and they’re trying to unload them ASAP. Hope all of you paid influencers consciences are clear once the reports of fires start rolling in.
teotwaki
Senior Member
Pretty obvious you've cornered the market on butthurt and didn't bother to read the thread since you last crawled out from under a rock. One member has had his units installed for over two months and no apocalyptic fires have burned out his 4Runner.
The other part you missed is that the Arclights are full of Chinese parts including the LEDs and the circuitboards. By your own vapid logic you had better keep a fire extinguisher near your Arclights for the day they catch on fire. :flamethrwoer2:
These Made In China items are straight out of ArcLights published parts list:
LED RED CLEAR 2PLCC SMD
OSRAM part number LR T66F-AABB-1-1-z
LR T66F datasheet Ver. 2.1
China RoHS Compliant Product
OSRAM Opto Semiconductors (China) Co., Ltd.
https://www.osram.com.cn/os/
No.57, Xi Qin Road
Wuxi Xinwu District
Jiangsu Province
P.R. China 214000
Tel.: +86 (510) 8190 8190
电子邮箱: [email protected]
热线电话：400-920-6282
欧司朗光电半导体（中国）有限公司
地址：中国上海市黄浦区西藏中路18号港路广场28楼
Pad2Pad is the supplier for ArcLight's printed circuit boards. The guy I talked to was very guarded and reverting to double-speak to protect his company BUT: unless you have a 5-day rush order single-layer PCB (that is made in America) all of your boards will come from CHINA.
Honestly. ArcLight boards should be labeled "ASSEMBLED in USA and contain numerous parts from China".
So please crawl back under your ROB (Rock Of Butthurt) until you actually have a valid argument and actual proof of anything that ever caught on fire or proof of your childish accusations of anyone being a "paid influencer".
:flipoff:.
Last edited:
VancouverRunner
New member
Sure. I'll be back when I feel like keyboard warrior. But that's clearly your function here isn't it? You've spread more hate per post in this thread and relayed even more attacks. Also thank you for your stellar job with your emojis, bold lettering, copy pasta from Cree's Chinese website. I'm happy it helps you sleep at night. :director::director::director::keyboard::keyboard::keyboard::keyboard:
And thank you for confirming the parts too. I feel safer already knowing ArcLight uses quality parts like CREE, OSRAM, and power blocks from an American company. Perhaps that's what he meant by made in the USA vs your weird assumptions and false narratives being arc light's manufacturing expert.:becky:
By the way these big pictures are for you. Not a good idea to misrepresent real American companies with a Global presence as being Chinese ones. :crazy::crazy::crazy::crazy:
And thank you for confirming the parts too. I feel safer already knowing ArcLight uses quality parts like CREE, OSRAM, and power blocks from an American company. Perhaps that's what he meant by made in the USA vs your weird assumptions and false narratives being arc light's manufacturing expert.:becky:
By the way these big pictures are for you. Not a good idea to misrepresent real American companies with a Global presence as being Chinese ones. :crazy::crazy::crazy::crazy:
Attachments
57HotrodVW
New member
Thanks. That's my write-up, done with the real deal ArcLight hatch lights. Your mileage with the knockoffs will likely vary...
--Eric
teotwaki
Senior Member
That writeup is a real solid contribution to the 4Runner community. I appreciate the time you put into it as I've had a bit of similar experience with my blog. Getting the right flow to the narrative and using just the right pictures to illuminate key points takes time.
teotwaki
Senior Member
Aren't you precious. All that misguided effort to post wrong information. A sad way to increase your post count.
Just because a company has a sales office in the US does not mean it is an "real American" company. Posting multiple pictures of bad information only embarrasses you further. :wow:
Let's again look at Osram which sells the Red LEDs used by ArcLight as the previous poster stated with the ArcLight parts list he shared. Note Osram clearly states where their HQ is and clearly state where production is with absolutely no production in the US. But it seems you consistently fail at reading comprehension don't you? Funny you pretend to read Chinese and claim it was CREE LEDs. You shouldn't lie like that. I gave the link (https://www.osram.com.cn/os/) where that text came from but you offer nothing to backup your frantic claims of "American Made". :hello: Osram LEDs are not made in the USA. Just sold here.
OSRAM Licht AG is a multinational lighting manufacturer headquartered in Munich, Germany.
SOURCE: Osram - Wikipedia
OSRAM was founded in 1919 by the merger of the lighting businesses of Auergesellschaft, Siemens & Halske and Allgemeine Elektrizitäts-Gesellschaft (AEG). On 5 July 2013, OSRAM was spun off from Siemens, and the listing of its stock began on 8 July 2013 on Frankfurt Stock Exchange.
Osram Opto Semiconductors (not to be confused with Osram Sylvania)
Osram Opto Semiconductors is a wholly owned subsidiary of Osram which designs and manufactures opto-semiconductor products. One of the main products of this subsidiary is light-emitting diodes (LEDs). As the world's second largest manufacturer of optoelectronic semiconductor for the illumination, sensing and visualization sectors, Osram Opto Semiconductors GmbH combines extensive know-how in semiconductors, converter materials and packages under one roof. Besides its headquarters in Regensburg, Germany, it has further production sites in Penang and Kulim, Malaysia, and Wuxi, China and a global network of sales and marketing centre.
Since you had to mistakenly throw CREE into the mix, chew on this:
CREE has been sending LED manufacturing outside of the US for quite a while. How can you say you "buy American" with a straight face when you are really buying Chinese? Oh no! Gonna' catch your 4Runner on fire, LOL (your claim)
Cree opens LED chip manufacturing facility in Huizhou
A grand opening ceremony was held on December 8, 2010 for Cree Huizhou Solid State Lighting Co., Ltd. at the Huizhou Zhongkai High-tech Industrial Development Zone in Huizhou City, Guangdong Province, China. The facility is Cree’s first LED chip manufacturing base outside North America, and this also makes Cree the first international LED company to set up a chip manufacturing facility in China.
Source: Cree opens LED chip manufacturing facility in Huizhou | LEDs Magazine
Or if you were savvy you could read their 2018 financial report HERE:
https://investor.cree.com/static-files/1093a940-b534-47eb-8966-24898912364a Page 25
LED products are produced at our owned manufacturing facilities located in
Huizhou, Guangdong Province, China. We also own dormitories for housing
our Chinese employees near and adjacent to the owned manufacturing
facilities. The owned manufacturing facilities, dormitories, and support
buildings are located on land that is leased from the Chinese government
through two leases. The first land lease is for 12 acres that expires in
June 2057 and supports the manufacturing facilities. The second land
lease is for 5 acres that expires in December 2082 and is used for dormitory
buildings.
ArcLight boards should be labeled "ASSEMBLED in USA and contain numerous parts from China" but you'll still insist that spending all that money on them somehow makes their Chinese parts less likely to catch on fire, LOL
Barcelona4R
New member
Oh **** off dude.. Do you have any evidence to back your claim lol I swear the fly's in here are bad.
My lights are running flawless. I'll make a YouTube video for you guys tonight. No a single problem at all
All in all, they work. The map lights and rear hatch lights are not polarity sensitive. I purposefully installed one the opposite way and they work. Super bright. Well worth the $65 imo
The dome light, I wrapped some Tessa tape to reduce rattling on the voltage booster.
Sent from my ONEPLUS A6013 using Tapatalk
The dome light, I wrapped some Tessa tape to reduce rattling on the voltage booster.
Sent from my ONEPLUS A6013 using Tapatalk
teotwaki
Senior Member
Well... Chinese quality. This ain't no arclights. They don't quite fit well. The socket adapters are too long. One lead broke off and I had to solder back on
Great review and thanks for the pictures too! Nice to see the facts on the build quality. Whenever mine show up I'll inspect the soldering on the leads. As the months roll by it would be good for folks to also report on LED or pushbutton switch issues and any outright failures.
How was the red LED light output?
- Status
Similar threads
