back window

I will attempt it tomorrow when there is sun light..

is kinda of dark here in Cali.

I might go for a pair of led's..

Cfranck1, would you have a picture of it on at night?

thanks.
 
Try going to the Lexus dealership. My 2000 GS400 needed some lights in the switches replaced and they sold them all seperately. The bulbs in the seat heater switches look real similar to the ones you have. You can also buy the green covers that go over the bulbs seperately.
 
I took a pictures of it at night. Kind of S**tty pic but you can see that the led rear window switch is brighter then the ECT ones. It's a shade of green off from a normal filament bulb but still pretty good.
Hope this helps.
 

Attachments

  • 4runner 001.jpg
    4runner 001.jpg
    57.1 KB · Views: 1,014
when you take that strip out that has you ECT button and rear window. you can actally take that cover off to exopse the circut board and it makes taking those bulbs out a lot easier as well as putting the new LED's in. You can still plug it in and make sure they all work before you put it all back together. some of those NEo-Wedge lights are Poly-something which makes it so they only work when you put them in one way. Autolumination will tell you which sizeyou need i think its (type A) but dont order from there though, get them from superbright LED's or another site I still have a few from autolumination that still work and its been almost 2 years, but i had those two (ECT and rear window) burn out on me within a year. here is a pic of mine all on
 

Attachments

  • mypics006.jpg
    mypics006.jpg
    58.4 KB · Views: 939
GottaBeTRD said:
some of those NEo-Wedge lights are Poly-something which makes it so they only work when you put them in one way.
Click to expand...

Your talking about Polarized and Non-Polarized bulbs.
LEDs are usually polarized. If they don't work one way, flip them and try again.
 
GottabeTRD,

how much did it ran you for the defroster, ect and back window switch ?

I got quoted about $8 dollars a bulb and apparently, they don't have a replacement bulb for the window and must order a new switch.. wtf?
 
Supra725 said:
GottabeTRD,

I got quoted about $8 dollars a bulb and apparently, they don't have a replacement bulb for the window and must order a new switch.. wtf?
Click to expand...

I'm not trying to be a wise A** ( just want to get the right info out there) but that's what I said in one of my first posts. (post#4) The Rear window switch bulb is NOT serviced separately, you have to buy the whole switch. That's why I bought just a LED bulb for the rear window switch. I wasn't going to pony up about 45.00 for a switch just so it could light up.
But the ECT bulb IS serviced separately. That only cost me about 5-6 bucks at the dealer.
 
Last edited:
piperoo said:
Samsonite!! haha....

GottaBeTRD, do you have the bulb sizes you used for your 2001? I have a 2001 and want to replace ALL of them.
Click to expand...

lol i love that movie! :lmao:

Thats stupid expensive for that part! hence its called the stealership! lol
As for the neo wedges i think they were like $2.99 a bulb (online). There are only 2 bulbs that go into the strip. One splits the light into the defrost and ECT and then there is one that lights up the rear window button. They are Type A (t3)
the type B's go in your cimate contol. Now when you get them, someone already mentioned this, but the LED's are a little bigger but they will fit and work i didn't have to modify the bulb i just had to take that stip thing completly apart amd get it in there

Piperoo
here is what i ordered this is recently so they should be right
you will need 3 #24’s for the dash
#74's for the key ring, and shifter
2 Neo wedges type A, (t3) (Buttons)
3 type B (t4) (climate control)
 
Last edited:
I think my luck is pretty low this week..

coming back from class tonight..

my ac switch decides to break on me..

Does anyone know if this part will fit on my 99?

Toyota Tacoma 4Runner Truck T100 AC Button 1990 - 97: eBay Motors (item 200478228876 end time Nov-26-10 23:34:05 PST)

If not, should I go hit up the stealership for one?

The part number is Denso 158086

thanks..

Might as well bite the bullet and order the bulb as well since I be there tomorrow.. but that led is so tempting though... :dammit:
 
sorry to add another one..

the ring around the cigarette lighter, that is suppose to be illuminated correct?

also, the hazards are suppose to be light up too correct? cause mine isn't illuminated and i don't know if it was or not.

I would do another thread but rather not jack up more servers space and just use my existing thread.

if they are illuminated, what size bulb would it be for both?

thanks.
 
Supra725 said:
sorry to add another one..

the ring around the cigarette lighter, that is suppose to be illuminated correct?

also, the hazards are suppose to be light up too correct? cause mine isn't illuminated and i don't know if it was or not.

I would do another thread but rather not jack up more servers space and just use my existing thread.

if they are illuminated, what size bulb would it be for both?

thanks.
Click to expand...

Yes, they are suppose to light. I just went thru my 2001 with all the little switch lights. The bulb for Cig lighter ring is not serviced separate, You have to buy the whole ring. Its not too expensive. Yes, the hazards switch is illuminated. You can buy the bulb separate. Just take the old bulb out and bring to dealer, They should be able to match it up with 1.
 
dang man you got all kinds of lights and things going out thats gotta be frustrating! Im not sure on the hazard light button bulb, but it's probably a neo wedge type A (considering the size) the center diff lock button is supposed to illuminate too and that is a Neo Wedge Type A As for the cig ring i just used the light that is supposed to light up the ashtray and moved it over to the cig ring. and it worked perfect!
Now for your a/c button when you say its broken is it just the bulb? or is it just not doing anything? cause if its just the bulb the light that illuminates your temp control (the center one) is the same bulb that lights up your temp knob.
those switches are probably expensive! i would just get the bulbs you would probably save around $40+ to spend on something cool for the Runner I bought two sets of lights to replace all the main ones and the first time i paid like $30 for all the lights and the backup set i only paid around $23 and superbright LED's.
 
cfranck1,

is the bulb just twist and pull?

GottaBeTRD,

is been a pretty stressful week, nothing went well. I went from back window switch to defroster to ECU and now the ac switch.

the worse part is, the ac switch snapped off completely. I have to buy a new one to replace it..

Got a question,

would you mind pm me the website and the lightbulb size for the the console?

thanks.
 
My back window lights up, but the defrost and ECT buttons don't. Might go in today and grab a bulb.
 
GottaBeTRD said:
dang man you got all kinds of lights and things going out thats gotta be frustrating!
Click to expand...

I too hate that. Sort of a pet peeve for me. I need all the lights on my dash to work or it doesn't look right.
Just sucks that most of the bulbs aren't easy to figure out.
 
You must log in or register to reply here.

Members online

Total: 308 (members: 3, guests: 305)

Forum statistics

Threads
278,304
Messages
3,554,041
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top