Brillos Builds

RandyBobandy said:
I’ve torn my pants a couple times on pieces of the rocker sticking out, and I pretty sure I could kick the frame into two pieces
Click to expand...
Yup wait till we get the frame photos so everyone can see how bad this one is. I still cant believe the PO drove it home to pull the transmission...:/

Sent from my SM-J337V using Tapatalk
 
Tetanus 1 got a replacement seat belt today. The old one wouldn't wind itself up anymore without assistance
2ea0466362337832dd1f6594592003ba.jpg


Sent from my SM-J337V using Tapatalk
 
[MENTION=318903]RandyBobandy[/MENTION] and I hit a local pick and pull. I got doors for the wife's sienna van and a set of tocuma lock out hub assembly for our 3td gens . :D

Out of luck for the Tundra calipers that fit the 16 in wheels. However, we did ok..;)

Sent from my SM-J337V using Tapatalk
 
Why you replace the insert. Careful with the center screw that goes all the through or you loose the little nut..;)
6ec597aa49822b16cf5ae1de9af929cd.jpg


Sent from my SM-J337V using Tapatalk
 
As you can see my paint and FF looked exactly how they did when changed the fenders last year. I was curious how it were would hold up in there and its perfect..:)
d3696ea0ef1919b6fd40eadcc9814512.jpg


Sent from my SM-J337V using Tapatalk
 
brillo_76 said:
$65.00.

Sent from my SM-J337V using Tapatalk
Click to expand...

Wow, great price.
I found one that was same color and “supposedly” original paint......NOT!
Drove 120 miles only to find a rusty tailgate that had been sprayed at least once, asking price of $250....PASS!
 
The proper way to repair that antenna is to get one from the parts store that doesn’t really fit, and then glue it in place without hooking it up to the radio, because your significant other says it looks stupid with it missing.

I have NOT done that, but I think that’s how the service manual says to do it
 
Sarki said:
Wow, great price.

I found one that was same color and “supposedly” original paint......NOT!

Drove 120 miles only to find a rusty tailgate that had been sprayed at least once, asking price of $250....PASS!
Click to expand...
I am sure this was repainted However. Eventually I have to paint this one to red. For the condition and price I couldn't go wrong.

Sent from my SM-J337V using Tapatalk
 
Got it all back together and will verify no leaks for a few days before putting the engine skid back on. :)

Sent from my SM-J337V using Tapatalk
 
should have put a big all aluminum rad on there, the extra cooling capacity will be necessary when we bolt a huge ebay turbo on there making like 50psi of boost
 
RandyBobandy said:
should have put a big all aluminum rad on there, the extra cooling capacity will be necessary when we bolt a huge ebay turbo on there making like 50psi of boost
Click to expand...
Or that external tundra coolers we were looking into at that pick and pull. :)

Sent from my SM-J337V using Tapatalk
 
Working on my 5 speed frame seal and inner plate project. You can see the frame is decent in this section. I did clean and corroseal the frame. Now I can weld new plates in and reseal the frame back upon this area..:)
2c725fce658244c7c1b88f887afba4b6.jpg
cd5f9b51f4ee3cf53993496a03f80c42.jpg
108fec30a25b40dc39531cecdd167308.jpg


Sent from my SM-J337V using Tapatalk
 
You must log in or register to reply here.

Similar threads

Dianna
Frame rust in the NorthWest?
Replies
4
Views
2K
yyyames
Y
T
2000 Toyota 4Runner SR5 parts vehicle / front-end collision
Replies
10
Views
5K
tpierpoint
T
B
'02 Sport - high mileage and woes
Replies
1
Views
2K
spartacus
spartacus
M
My damaged 4runner dilemma
Replies
3
Views
3K
Monty87ls
M
T
Starter Not Engaging?
Replies
3
Views
3K
TheDurk
TheDurk

Members online

Total: 436 (members: 3, guests: 433)

Forum statistics

Threads
278,310
Messages
3,554,078
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top