?Center Bore?

[hdeuce22]

I have a 2012 Limited and trying to determine what the center bore is on these. Can someone chime in and tell me? I'm getting ready to purchase new wheels online and I want to make sure I have all my ducks in a row. Thanks!

 

[BensonTT]

I think its 106.2 mm or 108.2

 

[Qjake]

The hub bore is 106.00 but 99% of aftermarket wheels are lug centric although you might be able to get hub centric rings for them.

 

[hdeuce22]

The hub bore is 106.00 but 99% of aftermarket wheels are lug centric although you might be able to get hub centric rings for them.

So as long as I get a bore of 106,I should be ok correct?

 

[Jaker]

MHT Fuel wheels are offered in 106.4 mm bore sizing. They're a good option.

 

[Qjake]

So as long as I get a bore of 106,I should be ok correct?

Yup but I doubt you'll find any as most aftermarket are bigger than 106 and the lugs center the wheel not the hub.

Here's a couple of threads with some info on hub vs lug centric wheels Here and Here

 

[hdeuce22]

MHT Fuel wheels are offered in 106.4 mm bore sizing. They're a good option.

Jaker,The wheel that I'm looking to order is the Fuel Hostage

 

[hdeuce22]

These are the wheels I want with the specs:

Fuel D530 Hostage - Chromel by Fuel Off-Road
FUEL D530 Hostage Wheel 20x9
Bolt Pattern 6 on 5.5
Finish = Chrome
Backspace = 5
Center Bore 106.4
MaxLoad 2200
Offset = 1

 

[Jaker]

These are the wheels I want with the specs:

Fuel D530 Hostage - Chromel by Fuel Off-Road
FUEL D530 Hostage Wheel 20x9
Bolt Pattern 6 on 5.5
Finish = Chrome
Backspace = 5
Center Bore 106.4
MaxLoad 2200
Offset = 1

That'll work well for you. I'm a fan of the Fuel "Gauge" rims myself.

 

[Qjake]

Yup those will definitely work well. What size tire are you going with??

 

[hdeuce22]

Yup those will definitely work well. What size tire are you going with??

I've been back and forth between 275/55/20 and 285/50/20 but I think I've finally decided on the 275's. The ratings for most of the 285's aren't near as good which is to be expected with more rubber on the road.

 

[Qjake]

Yup good choice on 275's, the 285's might give you some rubbing without a lift. You also may want to consider those wheels in 20x9 -12 offset, these will give you a little wider stance and I think you'll like the look. Just a suggestion.

 

[hdeuce22]

Yup good choice on 275's, the 285's might give you some rubbing without a lift. You also may want to consider those wheels in 20x9 -12 offset, these will give you a little wider stance and I think you'll like the look. Just a suggestion.

I've actually contemplated that as well. I do like the wider stance but I just wasn't sure I could go with the 4.5"BS without having to trim and cut. Are yours 4.5"BS and if so,did you have to mod anything to make them work?