Detours of Maine Spare tire hitch mount system

Do the two bolts holding the tire arm in its position do a good enough job holding its place under vibration? Or is welding recommended like the video shows near the end of the video in post #2?

I personally didn't trust it. Not because of build quality, just because I'm always paranoid of things going wrong. So what I did was I drilled through so the bolts would go in, and then I also welded them in place. This isn't exactly necessary from what I've been told, but it gave me peace of mind.
 
Obviously, I could be wrong, but I've had a ton of experience with his products and I 100% swear by them. They are quality-made and will handle just about anything you throw at them. At the time I bought it these didn't even exist for the 5th Gen's. I actually helped boost his sales by nearly 200% for Toyotas. Then RIGd and the others slowly came around.

Obviously, the RIGd is nice and has a lot of features, but again, at that point, you're better off spending $700 more and get a rear bumper and not only have better clearance, but more options for carrying things.

I'm not one to tell someone how to spend their money, but I believe you made the right decision, especially if you plan on getting a rear bumper in the future.

49090115538_13ea45aaa8_h.jpg


$700 more does not get you more of anything. The CBI rear with a swing, table and powder coated is over $4,000 shipped….so maybe you should actually do five seconds of research before spewing all over your keyboard on a Saturday. Just to recap, you believe the hundreds of people in here completely wasted their money on the rigd, and should have just spent thousands more on an actual rear bumper. Cool story Chad!
 
Last edited:
Obviously, I could be wrong, but I've had a ton of experience with his products and I 100% swear by them. They are quality-made and will handle just about anything you throw at them. At the time I bought it these didn't even exist for the 5th Gen's. I actually helped boost his sales by nearly 200% for Toyotas. Then RIGd and the others slowly came around.

Obviously, the RIGd is nice and has a lot of features, but again, at that point, you're better off spending $700 more and get a rear bumper and not only have better clearance, but more options for carrying things.

I'm not one to tell someone how to spend their money, but I believe you made the right decision, especially if you plan on getting a rear bumper in the future.

49090115538_13ea45aaa8_h.jpg

When i priced out the RIGd tire carrier, it didn't make any financial sense when I compared it to a DOM tire carrier or a shrockworks steel bumper w/ tire carrier.

When comparing DOM to RIGD:

700 buys you a tire carrier from DOM.
1400 buys you a tire carrier and powder coating from RIGD. That must be some fancy powder coating and a fancy latch.

When comparing RIGD to shrockworks:

1600 to 1900 buys you a tire carrier, hilift jack, and rotopax mounts from RIGD
2500 buys me all the above plus a steel bumper from shrockworks.

The way I looked at it was that the shrockworks bumper without tire carrier starts at 1700, so that means shrockworks charges 800 for a tire carrier, hilift and dual jerry can mount. That pricing is more inline with DOM or RIGD is way overpricing their products.

I wasn't going to overpay for a tire carrier (RIGD) but I wasn't going to overpay for a steel bumper either (CBI).

I ended up going with shrockworks. It made the most sense given my budget.
 
Last edited:
$700 more does not get you more of anything. The CBI rear with a swing, table and powder coated is over $4,000 shipped….so maybe you should actually do five seconds of research before spewing all over your keyboard on a Saturday. Just to recap, you believe the hundreds of people in here completely wasted their money on the rigd, and should have just spent thousands more on an actual rear bumper. Cool story Chad!

Yes .
 
When i priced out the RIGd tire carrier, it didn't make any financial sense when I compared it to a DOM tire carrier or a shrockworks steel bumper w/ tire carrier.

When comparing DOM to RIGD:

700 buys you a tire carrier from DOM.
1400 buys you a tire carrier and powder coating from RIGD. That must be some fancy powder coating and a fancy latch.

When comparing RIGD to shrockworks:

1600 to 1900 buys you a tire carrier, hilift jack, and rotopax mounts from RIGD
2500 buys me all the above plus a steel bumper from shrockworks.

The way I looked at it was that the shrockworks bumper without tire carrier starts at 1700, so that means shrockworks charges 800 for a tire carrier, hilift and dual jerry can mount. That pricing is more inline with DOM or RIGD is way overpricing their products.

I wasn't going to overpay for a tire carrier (RIGD) but I wasn't going to overpay for a steel bumper either (CBI).

I ended up going with shrockworks. It made the most sense given my budget.

Yup, it's pretty much a no brainer. I personally believe RIGd only does the pricing they do because of the IG influencers they have on their team. Or at least at the time of coming out they had quite a few. Followers eat stuff up and they knew they'd get whatever they wanted. Of course I understand price changes due to the cost of materials going up, but that isn't the case there.

My BruteForce bumper cost me about the same as your rear did, and I eventually went with that later when I was hitting trails that required the clearance. I don't know what DOM charges now, as I bought mine in 2017, but I can guarantee it's still worth it.
 
Yup, it's pretty much a no brainer. I personally believe RIGd only does the pricing they do because of the IG influencers they have on their team. Or at least at the time of coming out they had quite a few. Followers eat stuff up and they knew they'd get whatever they wanted. Of course I understand price changes due to the cost of materials going up, but that isn't the case there.

My BruteForce bumper cost me about the same as your rear did, and I eventually went with that later when I was hitting trails that required the clearance. I don't know what DOM charges now, as I bought mine in 2017, but I can guarantee it's still worth it.

When i found out RigD was charging 1400 for a tire carrier, they better include some extra stickers with purchase....should make suckers feel better about their purchase. Although I rather not be the sucker in the first place.

BUAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHA
 
Last edited:
Well that settles it, instead of eventually parting out my 4R when I trade it in or sell it, and get $1k for my overpriced rigd fanboi tire swing (which will sell in So Cal in two minutes on offer up) essentially renting it for $400 for five years, I’m going to donate my kidney so I can upgrade to the CBI for $4,000+…you know, because that departure angle is life Chad!
 
Well that settles it, instead of eventually parting out my 4R when I trade it in or sell it, and get $1k for my overpriced rigd fanboi tire swing (which will sell in So Cal in two minutes on offer up) essentially renting it for $400 for five years, I’m going to donate my kidney so I can upgrade to the CBI for $4,000+…you know, because that departure angle is life Chad!

Believe in whatever delusional fantasy you want....you do you.
 
See sig…the answer is still no Chadwick

what about your sig? Your name is Chad Chadwick? Got it, well Chad Chadwick, I hope you got some free stickers and some anus lube from Rigd for 1400 dollaaa's.

FYI, not gonna respond to anymore of your delusional fantasy posts.... So troll away....


Cheers
 
+1 for all the positive feedback.

I posted in this thread two years ago about mine and still have nothing but good things to say about the product. It was initially supposed to be a temporary spare carrier until I bought a full rear bumper, but it's done everything I've needed it to so I ended up keeping it for much longer than expected. Its been offroaded a ton, smashed on various obstacles, been in rain and snow, and i've had zero issues with it. Even the $30 rattle can job I did 2 years ago looks great still. Honestly, I still can't figure out why people are paying $1400 for these carriers when this one exists for literally a fraction of the cost.

I wanted the spare to sit closer than the DOM, I couldn't deal with the constant radio silence during the strewn out back and forth with DOM + I couldn't wait +10 months.

That said, $650 is a great price and if you're willing to deal w/ all that - more power to you.

I needed a solution with a few more features, in-hand sooner v. later and was willing to pay more.

Different strokes for different folks.
 
I wanted the spare to sit closer than the DOM, I couldn't deal with the constant radio silence during the strewn out back and forth with DOM + I couldn't wait +10 months.

That said, $650 is a great price and if you're willing to deal w/ all that - more power to you.

I needed a solution with a few more features, in-hand sooner v. later and was willing to pay more.

Different strokes for different folks.

Point taken. No hate, I'm sure everyone has their own reasons for getting the RIGd. It definitely has more out of the box features and add on options. From a price perspective, I just think that if more people knew about DOM, they would think twice about dropping double the money for the RIGd especially since most people just use these as a way to get their spare out of the stock location (or mall crawl).

I will note that the spare actually sits closer to the hatch on the DOM than any other carrier though

Wilco
2zwh00N.jpg


RIGd
ViJdvud.jpg


DOM
UYri9Ki.jpg


Dirtcom
6nxen16.jpg
 
How is the spare sitting closer to the hatch a benefit? The Rigd is not twice as much (for me at least) as I live local to so cal and didn’t pay shipping.
 
How is the spare sitting closer to the hatch a benefit? The Rigd is not twice as much (for me at least) as I live local to so cal and didn’t pay shipping.

I'm not saying it is or isn't a benefit, but for my needs, I wanted a holistically compact/tidy package for: 1) practical space/clearance 2) aesthetics

My hitch carrier from CTNewman for reference:

ZTr78Bj.jpg


TBjMjCo.jpg
 
How is the spare sitting closer to the hatch a benefit? The Rigd is not twice as much (for me at least) as I live local to so cal and didn’t pay shipping.

I'm not saying it is or isn't a benefit, but for my needs, I wanted a holistically compact/tidy package for: 1) practical space/clearance 2) aesthetics
My hitch carrier from CTNewman for reference:

ZTr78Bj.jpg


TBjMjCo.jpg

If it aesthetically appealing to me only, that’s enough.
*** My hitch carrier from CTNewman as well!

pnkk7x9Pj


pmYEhV4nj
 
I've been waiting 11 months now for my hitch from Detours of Maine. He hasn't responded to my messages in 2 months. Until he completes his current orders, I do not recommend anyone do business with this person or his company.
 
Whoa

I've been waiting 11 months now for my hitch from Detours of Maine. He hasn't responded to my messages in 2 months. Until he completes his current orders, I do not recommend anyone do business with this person or his company.


Damn.....
 
I've been waiting 11 months now for my hitch from Detours of Maine. He hasn't responded to my messages in 2 months. Until he completes his current orders, I do not recommend anyone do business with this person or his company.

dude I would have cancelled my order after 1 month past the expected ship date and no reply from the company. damn dude 11 months, just cancel and if you can't get a response file it with your credit card company
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,123
Members
248,016
Latest member
Advally Service

Trending content

Back
Top