Crikeymike
Senior Member
@Dobinsons_Mike
Did the long awaited shipment of coils arrive?
Yeah, 24 pallets today, and another 24 on Thursday. Digging through heaps of orders to try and get everyone's parts out ASAP!!! :flamethrwoer2:
Dobinsons 5th Gen T4R Suspension options - from Exit Offroad
- Thread starter Crikeymike
- Start date
Yeah, 24 pallets today, and another 24 on Thursday. Digging through heaps of orders to try and get everyone's parts out ASAP!!! :flamethrwoer2:
Crikeymike
Senior Member
Nope. I kind of wish I'd never mentioned it!! We haven't been able to test any yet.
I won't mention it again then and just wait for the chaos to ensue in the thread when they do drop.
aelarson
New member
Has anyone gotten the 1 inchers installed yet? I'm ready to pull the trigger, just want to see some pictures!
Badmeat
New member
Mine are shipping out today. Stoked!
aelarson
New member
Awesome, I cannot wait to see pictures! What are you doing for rear coils?
Luxury Meat
New member
Where'd da MF cheese go?
There was Dobinsons stuff up a day or two ago and now there is nothing.
Badmeat
New member
I'm staying stock in the rear for now. If they release their 2" coils for the Pro, then I'll likely go with around a 1" lift rear spring.
aelarson
New member
Cant wait to see it. It'll be interesting to see if there is any rake with only lifting the front!
Post lots of pictures!
Last edited:
Badmeat
New member
Will do. I've measured and there should be .75-1" of rake still
Crikeymike
Senior Member
I think I'm going to have to back off that site. They're pushing down the little man with some crazy rules they have. I've got the store switched off right now until we sort out a few things with Amazon
Look here: Front Page - Dobinsons Direct
Still adding stuff to it daily. Use the coupon code in my signature to save 5% too.
Email me if there's something else you need that you don't see or can't find.
Luxury Meat
New member
Sweet, thanks Mike!
rochmpr
Senior Member
See when happens when you take time off. Next time, a little wheeling will make it all better
Crikeymike
Senior Member
1.0" TRD Pro lifted coils are now in stock, and available on our new website here:
Dobinsons C59-748R Front 1.0" Lifted Coil Springs for Toyota 4Runner TRD Pro 2014-17 - Dobinsons Direct
First customer to send me some good on-vehicle photos and side profile shots of their truck, I'll throw those up on the page.
And for everyone else that's looking for suspension, here's the 2" to 2.5" suspension builder page for 5th Gens without KDSS:
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 Non KDSS - Dobinsons Direct
And vehicles with KDSS:
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 with KDSS - Dobinsons Direct
More to come soon, including buying the different colored coils on there as well.
Dobinsons C59-748R Front 1.0" Lifted Coil Springs for Toyota 4Runner TRD Pro 2014-17 - Dobinsons Direct
First customer to send me some good on-vehicle photos and side profile shots of their truck, I'll throw those up on the page.
And for everyone else that's looking for suspension, here's the 2" to 2.5" suspension builder page for 5th Gens without KDSS:
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 Non KDSS - Dobinsons Direct
And vehicles with KDSS:
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 with KDSS - Dobinsons Direct
More to come soon, including buying the different colored coils on there as well.
rochmpr
Senior Member
Those super heavy 577's don't flex on long travel (haha). Drivers on the bump stop, passenger not fully dropped out.
Attachments
Kamalani Mahie
New member
Mike, are these coils 14" long? Same spring rate as the OEM Pro coils? Can't seem to find number specs on your site. Trying to see if they'd match well with the rear coils I've currently got. Thanks!
Crikeymike
Senior Member
C59-748R - 358mm free height (14.09"), 518LB/IN spring rate, within a few % of stock.
Kamalani Mahie
New member
Thank you.
Marine0369
Member
Mike, just to confirm, If I have KDSS and get the non-KDSS Spring/Struts, I need to put the 1/4" spacer on the front right strut, correct? Thanks!
hoobhoob
Member
Just put in an order for my 2016 Trail Edition KDSS (RSG sliders, RCI skid, and soon a small center bumper.)
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 with KDSS:
C59-314 - 80-150LBS medium load front weight, 2" lift.
C59-723 - Stock weight rear end, 1.25" to 1.5" lift
GS59-700 - Twin Tube, suits 0-2.5" lift
GS59-705 - Twin Tube, suits 0-2.5" lift, softer valving for empty rear ends.
Was able as a Canadian to order and ship to my US package service in New York. Glad to see your storefront and Paypal profile don't get all perturbed by a Canadian CC confirmed/linked to Paypal (many storefronts do..) :canada:
Didn't opt for a diff drop kit since it's not clear if it's any help for a 2" lift (haven't read much about premature wear here) and I'd rather not lower the skids any more since KDSS makes it already quite low. But not hard to add after the fact if I hear otherwise.
EDIT: I think I broke your website...
Revolution Slider Error: You have some jquery.js library include that comes after the revolution files js include.
This includes make eliminates the revolution slider libraries, and make it not work.
To fix it you can:
1. In the Slider Settings -> Troubleshooting set option: Put JS Includes To Body option to true.
2. Find the double jquery.js include and remove it.
Dobinsons 2.0" to 2.5" Lift Kit Toyota 4Runner 2010-18 with KDSS:
C59-314 - 80-150LBS medium load front weight, 2" lift.
C59-723 - Stock weight rear end, 1.25" to 1.5" lift
GS59-700 - Twin Tube, suits 0-2.5" lift
GS59-705 - Twin Tube, suits 0-2.5" lift, softer valving for empty rear ends.
Was able as a Canadian to order and ship to my US package service in New York. Glad to see your storefront and Paypal profile don't get all perturbed by a Canadian CC confirmed/linked to Paypal (many storefronts do..) :canada:
Didn't opt for a diff drop kit since it's not clear if it's any help for a 2" lift (haven't read much about premature wear here) and I'd rather not lower the skids any more since KDSS makes it already quite low. But not hard to add after the fact if I hear otherwise.
EDIT: I think I broke your website...
Revolution Slider Error: You have some jquery.js library include that comes after the revolution files js include.
This includes make eliminates the revolution slider libraries, and make it not work.
To fix it you can:
1. In the Slider Settings -> Troubleshooting set option: Put JS Includes To Body option to true.
2. Find the double jquery.js include and remove it.
Last edited:
