eBay uniball control arms?

[Jdw1222]

Thanks for suggestion

Bolts seemed really tight. Loosened them and greased Fittings and re-torqued. It didn’t help

Also ordered new misalignment spacers/hardware from dirt king. Swapped those out. Check the Uniballs and they still felt good and tight. I Feel better with the dirt king spacers as the eBay ones aren’t stainless

I will update once I figure this out but appears to me that noise maybe isn’t coming from UCAs

 

[Blaise22]

Is this one of the replacement bushing kits everyones been using for these uca's?

Upper Arm Bushing Rebuild Kit | DK-811947 – Dirt King Fabrication

 

[Jdw1222]

has anyone had issues with the bushings?

I just had 2 of them fail after maybe 20K miles. Cant figure out why they have failed, but the whole control arm is wobbly now and will have a couple days downtime until replacements show up. Truck is not driveable

I used a marine grease and greased while the main bolt was loose and didnt deform the bushings

 

[Hypageck]

I've had my original bushings for 70k miles, they're still tight with no play.