Eibach needs a stock TRD PRO in SoCal

[mark@eibach]

its going to be hard to find a TSB in SoCali
you guys just need a 21 Pro because thats what they are replacing it with right

EDIT: We actually had one here this morning and have confirmed 2021 fitment. We will be finalizing part numbers and should be sending them to production shortly. I would anticipate a 10-12 week production period once the part number is released.

 

[aaron_clt]

We can't confirm that's what they're replacing it with until we get one or the other in house.

We have part number data from the TSB parts, but don't have the 21 Pro part numbers yet.

But that's only half the equation. We don't just "ship" new products for vehicles. Part of what sets us apart it taking the time to make sure it works and rides correctly. So any way you cut it, we need vehicles.

The 2021 comes as a L/R set and is part # : PTR61-89210

the TSB is for PTR61-89200-LF & PTR61-89200-RF

the individual parts are the exact same, the "210" is just the # to order both the -200 LF & RF

 

[MGordo]

I would anticipate a 10-12 week production period once the part number is released.

Hi Mark, may be too early to answer, but any idea how different the Tacoma version is compared to the 4Runner?
Would the Tacoma option work if you wanted a smaller lift? (I think theirs is 1.25" and 650lbs or so?

 

[matoolie]

EDIT: We actually had one here this morning and have confirmed 2021 fitment. We will be finalizing part numbers and should be sending them to production shortly. I would anticipate a 10-12 week production period once the part number is released.

Great news Mark! Thanks for the effort and update! Hopefully you will be able to give us a heads up here when the kit becomes available.

 

[Rams50]

EDIT: We actually had one here this morning and have confirmed 2021 fitment. We will be finalizing part numbers and should be sending them to production shortly. I would anticipate a 10-12 week production period once the part number is released.

Indeed you did. Thank you for that Mark! I picked it up an hour or so ago and so far so good!
Tell Michael I said thanks again and that I still want a smaller size shirt and a hat when you get some made �� lol
I tried to post a picture but wasn't able to because of the size restriction I think.
Over all, I like the ride so far (drove it 50 miles to get home). I'll report back when I go off road ��

 

[MGordo]

Indeed you did. Thank you for that Mark! I picked it up an hour or so ago and so far so good!
Tell Michael I said thanks again and that I still want a smaller size shirt and a hat when you get some made �� lol
I tried to post a picture but wasn't able to because of the size restriction I think.
Over all, I like the ride so far (drove it 50 miles to get home). I'll report back when I go off road ��

Are you able to say what height you gained? (Assuming you are a 21 or on the updated coilover.)

 

[mark@eibach]

Indeed you did. Thank you for that Mark! I picked it up an hour or so ago and so far so good!
Tell Michael I said thanks again and that I still want a smaller size shirt and a hat when you get some made �� lol
I tried to post a picture but wasn't able to because of the size restriction I think.
Over all, I like the ride so far (drove it 50 miles to get home). I'll report back when I go off road ��

Right on! Thanks for helping out both us and the Community!

We have all our apparel pulled at the moment, but NEW items should be here by end of month. We'll for sure get you covered when they get here.

the Engineering team was happy with the ride quality and heights, so I'm happy to hear you share the same sentiment!

 

[ProRunning]

Indeed you did. Thank you for that Mark! I picked it up an hour or so ago and so far so good!
Tell Michael I said thanks again and that I still want a smaller size shirt and a hat when you get some made �� lol
I tried to post a picture but wasn't able to because of the size restriction I think.
Over all, I like the ride so far (drove it 50 miles to get home). I'll report back when I go off road ��

Thanks for stepping for all of us! Curious is yours a 21 or a 19/20 with the tsb performed?


Sent from my iPhone using Tapatalk

 

[Rams50]

Are you able to say what height you gained? (Assuming you are a 21 or on the updated coilover.)

Unfortunately, I did not get a chance to take the measurements as Eibach finished replacing them earlier than I expected. Eibach informed me that it was around 1.5" in the front and 1" in the back.
I can take measurements later on today and update.

 

[Rams50]

thanks for stepping for all of us! Curious is yours a 21 or a 19/20 with the tsb performed?


Sent from my iphone using tapatalk

2021

 

[Rams50]

Right on! Thanks for helping out both us and the Community!

We have all our apparel pulled at the moment, but NEW items should be here by end of month. We'll for sure get you covered when they get here.

the Engineering team was happy with the ride quality and heights, so I'm happy to hear you share the same sentiment!

Sure thing. I plan to take it out on a trail on the 20th, so I will update here afterwards as well.

Cheers!

 

[ILBEATU]

Will these springs support the weight of an ARB bumper and winch??

 

[Rams50]

Are you able to say what height you gained? (Assuming you are a 21 or on the updated coilover.)

I took measurements from the wheel cap to the fender...
Rear measures 24" and front is 22.5
Unfortunately, I thought that Eibach was just taking measurements when I dropped off the car, so I did not check what it was at before they installed their springs.
It was stock though, so whatever a stock 2021 pro is at.

I hope that helps.

Cheers!

 

[edgesalon]

Indeed you did. Thank you for that Mark! I picked it up an hour or so ago and so far so good!
Tell Michael I said thanks again and that I still want a smaller size shirt and a hat when you get some made �� lol
I tried to post a picture but wasn't able to because of the size restriction I think.
Over all, I like the ride so far (drove it 50 miles to get home). I'll report back when I go off road ��

I would like to know the 21 pro stock measurements also see if there are any differences
nice Congrats Man hope to see you again at one of the SoCal gathering would love to see your rig

 

[Rams50]

I would like to know the 21 pro stock measurements also see if there are any differences
nice Congrats Man hope to see you again at one of the SoCal gathering would love to see your rig

Thanks Man!
I think the front was at 21" and the rear around 23"
I haven't heard of any upcoming meet and greet yet, but definitely...

 

[Eltigreblanco]

Looking forward to getting this kit

 

[Rams50]

Update - I went on a trail over the weekend and overall, I am very pleased!!!

Good to go gents!! And thank you [MENTION=1692]Mark[/MENTION] & Eibach!!!

 

[ProRunning]

Update - I went on a trail over the weekend and overall, I am very pleased!!!

Good to go gents!! And thank you [MENTION=1692]Mark[/MENTION] & Eibach!!!

Awesome to hear! Looking forward to when they become available to order.


Sent from my iPhone using Tapatalk

 

[Double A]

I too look forward to ordering this kit!! Maybe [MENTION=1692]Mark[/MENTION] or Eibach could take a list of those interested and then notify us when it's available to order? Just a suggestion.

 

[mark@eibach]

Will these springs support the weight of an ARB bumper and winch??

These were developed using factory weight and spring rate. You will not get the full lift height we call out with those items installed, but the kit will definitely lift the front, we're just not able to say exactly how much.

I took measurements from the wheel cap to the fender...
Rear measures 24" and front is 22.5
Unfortunately, I thought that Eibach was just taking measurements when I dropped off the car, so I did not check what it was at before they installed their springs.
It was stock though, so whatever a stock 2021 pro is at.

I hope that helps.

Cheers!

Not to worry, we have start and end data.

You gained 1.4" lift on the front using the new spring.

I too look forward to ordering this kit!! Maybe [MENTION=1692]Mark[/MENTION] or Eibach could take a list of those interested and then notify us when it's available to order? Just a suggestion.

I will keep this thread updated as they become available. At this moment, the 2021 and TSB vehicle springs are due for completion August / September.

Anyone who has received the TSB and can provide proof of purchase and proof of TSB completion (all names must match) will receive first dibs and special pricing on the updated kit. I will notify you once we have that program implemented.