Great thread! I'm in the middle of this very conundrum. I am thinking I am going to go with skid-plates and or sliders first. I need to get rid of my stock running boards first. It is so tempting to go with rims and lift first, but looking through a few build threads on here area good reminder that it doesn't all have to happen at once.
The bad news is that the more time I spend on here the longer my list gets!
I am in the market for a 4th gen or 5th T4R. Will a center diff still work for off roading or should I look for a rear diff?
... Honestly the best thing you can upgrade is your brain. Invest in driver training and proper recovery tools and techniques ...
This was actually my first thought in response to this question, even though I realize it's a little bit of a tangent since the question was about vehicle upgrades.
When I got my first 4WD rig (a stock '74 FJ40) I guess I thought it would go absolutely anywhere. I took it out and promptly got it stuck on a steep, deeply rutted track on the side of a mountain. Naturally, I had very little recovery gear or knowledge of how to get myself out. That was a long day!
The next year, 2004, I attended a training class held at an off-road venue and led by an International 4WD Trainers' Association certified master 4WD trainer. I have never regretted doing that. I learned basics of recovery techniques, recovery gear, driving techniques, modifications, responsible backcountry use/environmental ethics, etc. Also, as a novice off-roader I was pushed out of my comfort zone, in a controlled, supervised setting, and learned that my truck could indeed do some pretty amazing stuff. The experience also gave me a frame of reference for prioritizing which future mods I wanted to do on my vehicle.
Recovery gear should come first. I have lost track of how many times over the years I have ran across people who are stuck, and they have no recovery gear or good recovery points.
Recovery gear...where do you suggest starting? What does a good recovery pack include?
So, yeah, I got tires, sliders, and Bilsteins. I have put some pretty nice marks on the stock skid plates, but before I invest in new skid plates, do I really need them? Why shouldn't I just grind and bang the factory skids till there are holes? I have the Trail so it has engine, trans, and gas tank skid plates. I check under my rig when I get home from every off road trip, and all of the damage to date is on the skid plates.
I guess I should really ask, what scenario could happen that I would wish I had better protection underneath?
Thanks in advance for your input!
This was actually my first thought in response to this question, even though I realize it's a little bit of a tangent since the question was about vehicle upgrades.
The next year, 2004, I attended a training class held at an off-road venue and led by an International 4WD Trainers' Association certified master 4WD trainer. I have never regretted doing that. I learned basics of recovery techniques, recovery gear, driving techniques, modifications, responsible backcountry use/environmental ethics, etc. Also, as a novice off-roader I was pushed out of my comfort zone, in a controlled, supervised setting, and learned that my truck could indeed do some pretty amazing stuff. The experience also gave me a frame of reference for prioritizing which future mods I wanted to do on my vehicle.