Flashlight mounts??

[RickC]

I have been trying to figure out where to mount a flashlight inside the 4runner that doesn't look bad. Where have you guys mounted lights? I have a 3D cell maglite, and I have a maglite mount. I also have a Streamlight stinger: Stinger® Series - PolyStinger DS® LED | Streamlight which is an awesome light, but I would rather mount the maglite in the vehicle. I have seen one or two of your mounts.

Show pics if you got 'em.

Thanks in advance,
Rick

 

[gaterose]

I have a polystinger in my center console

This doesn't do you much good but I also have 2 flashlights on my cargo box, 3 D cell maglight on the left & streamlight ultrastinger on the right

 

[RickC]

That works in the console, but my console is full of other crap like sunglasses, etc. I don't have the room inside there for a light. I thought about mounting the maglite to the jack cover in the back, but I don't want to drill into my original cover. I thought if I could find one from a wreck and drill that one, but I haven't had any luck finding one.

 

[KPINKY7]

3M double sided tape!!:girl:

 

[RickC]

3M double sided tape!!:girl:

Would that be strong enough to hold that heavy of a flashlight?

 

[Desert Fox]

Cargo area

I have a polystinger in my center console

This doesn't do you much good but I also have 2 flashlights on my cargo box, 3 D cell maglight on the left & streamlight ultrastinger on the right

Matt,
If you have not already done a write up on your cargo area mod you should. Yours is the best design and most practical one I have seen so far. I will be staling some of your design.

:keyboard:

 

[chaz]

quickfist clamp mounted to front of drivers seat

 

[snowbrdr033]

@DesertFox - He has done a write up for the cargobox! IIRC, he changed it slightly after the original build. I agree, it looks really good.....I think Matt has it copyrighted, so may want to check with him before you steal his ideas hahaha
:boxer: :artist:

 

[KPINKY7]

Works for me!!!

 

[ryangab]

i have my 3 cell Mag light attached to my driver side Weathertech. Super easy to grab when needed.

 

[Desert Fox]

@DesertFox - He has done a write up for the cargobox! IIRC, he changed it slightly after the original build. I agree, it looks really good.....I think Matt has it copyrighted, so may want to check with him before you steal his ideas hahaha
:boxer: :artist:

Smart man, I will be glad to donate a buck fifty for the plans :banana:

 

[gaterose]

Desertfox here is my writeup, it should be detailed enough to help. Feel free to PM me if you have any questions.

http://www.toyota-4runner.org/4th-gen-t4rs/80985-another-cargo-box-but-twist-lots-pics.html

Like snowbrdr said I changed it as you can see it at the bottom of the thread. I upgraded to a 12W3 which require more space & depth so it changed a bit but I'm debating switch to a 13TW5 (JL thin sub) so I can go back to the original design with the flat floor.

Sad thing is I had a 13TW5 and sold it when I bought the 4r

 

[glock56534]

Many people have mounted their MagLites to the compartment cover where the jack is located. It takes 5 minutes and is out of the way. Just buy the MagLite Mounting Clips and attach them to the plastic with the provided mounting screws (only need a screwdriver, the plastic is soft).

Look around on the forum and you can find pics.