HD-SKO Sliders are on and some other questions.

[masphx]

About a little more then a month ago my HD-SKO sliders were welded to the 4Runner...

Rig is naked as I'm prepping it to get detailed at a shop(Polish & Wax) to bring back the natural white shine...




Did some minor cutting of the flares to fit the sliders under them...




Now for some questions about a couple cheap mods I was thinking about doing...

First, can the trailer hitch attached to my 4Runner be used to do the hitch flip mod?




Second, I have only seen it a few times but people mod their front bumpers on the 3rd gen by cutting the bumper on both sides at an angle.




Now for a couple of fun pictures...

4Runner doing its thing...


My 350z after its detail from the same shop the 4Runner is going to...

 

[slomatt]

The hitch flip mod is usually done on older 4runners where the center section of the hitch is bolted to the sides, on those you can just remove the bolts and flip the center section. On yours you would have to cut and re-weld the hitch and notch the bumper.

- Matt

 

[audiness]

Can you post a picture of the bumper mod you are referring to? I am curious

 

[BlackCat914]

Can you post a picture of the bumper mod you are referring to? I am curious

I think he's talking about this.

 

[masphx]

Yep,

That is the bumper mod I was thinking about. Any down side to having it done? I think I looks better, I little more aggressive in a way. Any close-up pictures?

 

[BlackCat914]

Yep,

That is the bumper mod I was thinking about. Any down side to having it done? I think I looks better, I little more aggressive in a way. Any close-up pictures?

I'll post some in a little bit.