Help Me Please.....Pics inside

GX4SEVEND

New member
What did I break?
 

Attachments

  • 2010-09-24_19-18-28_858.jpg
    2010-09-24_19-18-28_858.jpg
    101.2 KB · Views: 938
  • 2010-09-24_19-18-06_522.jpg
    2010-09-24_19-18-06_522.jpg
    89.9 KB · Views: 644
  • 2010-09-24_19-19-09_834.jpg
    2010-09-24_19-19-09_834.jpg
    36.7 KB · Views: 620
Register to hide this ad
looks to me like your cv boot ripped and threw the grease everywhere, and it also had water in it.... best i can figure...
 
u can continue to drive it, but you will lose that cv joint... not that big of a deal beacuse its the front and you dont need it for street driving... however, if you use 4wd you will need to replace it asap... might get away with just a boot and a repack of the grease.. but once grit gets in there it will die fast.
 
naaa... a cv joint is not too bad...... maybe 300 never replaced them on a 4 runner so thats a rough estimate...
 
I'm really not that mechanicaly inclined, even if I was, I've not no tools here and no where to work on it. You guys think its better to replace just the boot or do the half shafts from autozone?
 
how much do u use 4wd? if seldome.. i would do the boot... just clean it real well.... if alot, i would go the half shaft route... try a search and see f there is a dyi here.
 
That boot doesn't look ripped from what I can see of it.....that goo looks more like oil and water.

The OP should maybe check the radiator for goo and his oil for more goo.

Isn't cv grease usually dark green/blackish?
 
That boot doesn't look ripped from what I can see of it.....that goo looks more like oil and water.

The OP should maybe check the radiator for goo and his oil for more goo.

Isn't cv grease usually dark green/blackish?

agreed.. however the grease in the cv will turn that color w water same as oil and water will.... and its right in the cv area........ but check these things too. :fishing:
 
I'm really not that mechanicaly inclined, even if I was, I've not no tools here and no where to work on it. You guys think its better to replace just the boot or do the half shafts from autozone?
ill be in albany this wednesday for a few days visiting my mom if you want to drive this way ill help you replace it
 
Last edited:
well there you go get the cv and stop on by it takes a hour or soo ..also pick up a little bottle of blue thread lock at the parts store
 
Alright I will go check in the morning to see if anyone has them in stock or can get then here before thursday. Now i'm worried its something else like others have mentioned
 
na im 100% sure thats just a torn boot ..also call around here in albany too if no luck down there
 
Last edited:
good chance the other might puke on you too ya just a whole new cv's... ive seen write up's on how to replace the boots and it dont look like a fun job
 
Last edited:
Looks like o'rielys has them in stock down here. I'll see if i can grab them tomorrow. You sure you don't mind helping with the install? PM me your rates lol. And you've got all the tools in albany?

Also, let me know if you have any rear spacers or trim packers. I might buy those if ya have them.
 
Last edited:
That definitely looks like a torn cv boot. Anyway sorry to go off topic, but I noticed that you have an OME lift..do you have the diff drop also? Again sorry to go off topic but just really curious..
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service

Trending content

Back
Top