I was told it's not compatible because it gets in a way with kdss ? sorry I'm a newbie and I just got into this building my 5th gen 4Runner sr5 p
Installing TRD Pro bumper trim pieces on SR5
- Thread starter Hook 'Em Horns!
- Start date
I was told it's not compatible because it gets in a way with kdss ? sorry I'm a newbie and I just got into this building my 5th gen 4Runner sr5 p
manofsteele2003
New member
Well if you have an Sr5 then you don't have KDSS.
I take your words from it since we have the same car minus the 3rd seat.
Attachments
Do you have the rear hatch panel up for sale?
I'm actually going to start building a Silver TRD Pro w/KDSS... lol..
Changed my mind from a Trail to the Trail Premium. Will have the Pro rims installed at the dealership before I pick up. I do like the PRO grill a lot, so grabbed that... Ordered some 275 KO2s...
Just need to decide if I/m gonna spend the change on the bumpers, or just plasti-dip.. Bam... TRD Pro w/KDSS..
Changed my mind from a Trail to the Trail Premium. Will have the Pro rims installed at the dealership before I pick up. I do like the PRO grill a lot, so grabbed that... Ordered some 275 KO2s...
Just need to decide if I/m gonna spend the change on the bumpers, or just plasti-dip.. Bam... TRD Pro w/KDSS..
Rob71
New member
I am looking into wrap the front valance and the back instead of the chep plastic dip:embarassed:
rpontbriand
New member
Yip. Thats what I did to mine. Added a bunch of Pro window dressing and now moving on to other things ...
Rob71
New member
Can you tell me the parts number for the TRD front and rear valance black and clips. I might have to order them instead of vinly wrap mind. Might cost me less and would look better. Thanks in advance
eace::usa2:
Rob71
New member
Can you share the part numbers for the trd pro black valance front and back. I need to order them :bowl:
Im assuming its all direct fit. Probably just buy the limited bumper and bolts right up...
I use those part diagrams and check surrounding parts (splash guard, wheel well inserts) make sure those part numbers are the same between an sr5 and limited.
BTW where in wisco?
Mistaken
New member
You would need to swap the fender liners, crash beam and other small parts to make the Limited parts work on a non Limited. Its not a direct swap.
Bm3r1
New member
manofsteele2003
New member
The trail already has these pieces on the bumpers except they're silver. So the process would be; remove, paint, reinstall.
Bm3r1
New member
Where did you order these?
Bm3r1
New member
Perfect thanks!
codyHTX
Member
i've had some questions on the trail to TRD rear valence swap i helped my friend with, so i thought i would post some pages from the repair manual (found somewhere in this forum) and the basic steps in this appropriately titled thread to help those searching:
1) remove rear mudflap screws and snap rivet things (not sure what they're called) there's about 6 total on each side) and take mudflaps off
2) remove 6-8 screws/bolts from underside of bumper cover
3) open tailgate and remove jack box hole cover
4) remove 8 screws/bolts that were hidden by tailgate (6 around bottom & 2 up sides)
5) wiggle the bumper cover loose starting from the edges at the fenders working toward the center of the tailgate opening (comes off with minimal effort once bolts r gone)
6) undo the clips hold the valence on with a flat head, slap the new one in and reverse the steps to reassemble.
notes: all the above mentioned screw/bolt heads are 10mm & keep an old blanket on the ground to lay the cover on once its off. it weighs next to nothing and this can certainly be done solo, but having a partner never hurts.
1) remove rear mudflap screws and snap rivet things (not sure what they're called) there's about 6 total on each side) and take mudflaps off
2) remove 6-8 screws/bolts from underside of bumper cover
3) open tailgate and remove jack box hole cover
4) remove 8 screws/bolts that were hidden by tailgate (6 around bottom & 2 up sides)
5) wiggle the bumper cover loose starting from the edges at the fenders working toward the center of the tailgate opening (comes off with minimal effort once bolts r gone)
6) undo the clips hold the valence on with a flat head, slap the new one in and reverse the steps to reassemble.
notes: all the above mentioned screw/bolt heads are 10mm & keep an old blanket on the ground to lay the cover on once its off. it weighs next to nothing and this can certainly be done solo, but having a partner never hurts.
manofsteele2003
New member
Wow, I think that's the first I've ever heard. I think the Limited front end is absolutely hideous, but to each his own I guess.
MadeforVermont
New member
Rear bumper valance part number and clips
I'm about to purchase a White T4R Trail and just came across this forum. I really appreciate all the great info!!
I'm looking to replace the front and back valances with the TRDPro black valances. I have the part number (thanks to Hook Em' Horns) for the front valance, but need the part number for the rear valance. Does anyone have that??
I also saw the clip information on this forum. If I use the clips that come with the White Trail, will they show on the black valance? or should I order the black TRD Pro clips?
Thanks!
Hi,
I'm about to purchase a White T4R Trail and just came across this forum. I really appreciate all the great info!!
I'm looking to replace the front and back valances with the TRDPro black valances. I have the part number (thanks to Hook Em' Horns) for the front valance, but need the part number for the rear valance. Does anyone have that??
I also saw the clip information on this forum. If I use the clips that come with the White Trail, will they show on the black valance? or should I order the black TRD Pro clips?
Thanks!
