Introducing the RAY10

[mteolus]

If Vin doesn't have the lugs in stock, these will work.

https://wheelersoffroad.com/i-25507...+Style+Conical+Lug+Nuts+12mm+X+1.5+&go=Search

 

[scottblink23]

You will not be able to use the OEM lugs with any of our wheels. ET M12x1.50 is the size you would need.

Hey Vin do you have any side pictures for the Ray 10 -38 offset? I'm interested in seeing how far they poke out and I'm not having any luck.

 

[mteolus]

Here is a pic of a F5 -38. The new Ray10 -38 should be the same.

17x9 Stealth Custom Series F5 -38 offset with 285 70 17 tires - Album on Imgur

 

[scottblink23]

Here is a pic of a F5 -38. The new Ray10 -38 should be the same.

17x9 Stealth Custom Series F5 -38 offset with 285 70 17 tires - Album on Imgur

Thanks!

 

[Rpreme]

SCS Ray 10 17x9 3.5BS (-38)

I'll leave this here... Thanks to Vin and the team at SCS for making this size!

 

[mteolus]

I'll leave this here... Thanks to Vin and the team at SCS for making this size!

Looks dang good!

 

[montijo505]

I'll leave this here... Thanks to Vin and the team at SCS for making this size!

Give the people what they want, that full rig side shot!


Sent from my iPhone using Tapatalk

 

[Rpreme]

Give the people what they want, that full rig side shot!


Sent from my iPhone using Tapatalk

Ask and you shall receive!

 

[montijo505]

Ask and you shall receive!

I’ve been low key looking for a clean 3rd gen to build. Thanks for the shot!


Sent from my iPhone using Tapatalk

 

[ruff4runner]

I'm super excited about my set of Ray 10's I got last night, (there was a lot of refreshing the page at about 5:59) but there were no ET M12x1.50 spline lugs available on your website. Will they be available soon and if not could you point me to another resource? Just to confirm, ET M12x1.50 is the correct size for a Gen 5 4runner?

 

[SCSPerformance]

I'm super excited about my set of Ray 10's I got last night, (there was a lot of refreshing the page at about 5:59) but there were no ET M12x1.50 spline lugs available on your website. Will they be available soon and if not could you point me to another resource? Just to confirm, ET M12x1.50 is the correct size for a Gen 5 4runner?

You can order these,

https://www.amazon.com/Gorilla-Auto...RILLA+21133ET&qid=1556730760&s=gateway&sr=8-8

 

[bearisasquare]

I have a 4th gen that i will be putting an Icon Stage 2 lift on.

Ive been looking at the Ray10 and want to know what you would recommend, the 17x8.5 or the 17x9. I don't mind having to do some mods to make sure it all clears. Is there anything else to consider if going the 17x9 route? Is the main difference the width of the stance with the 17x9?

 

[SeattlePRO]

Here is a pic of a F5 -38. The new Ray10 -38 should be the same.

17x9 Stealth Custom Series F5 -38 offset with 285 70 17 tires - Album on Imgur

Do you know what suspension is on this? This is the first pic I've seen of the 17x9 -38 without having a high clearance cut on the bumper.