LawnDart's Build Thread

Just passed you on I 70E going towards Grand Junction.

I was the one waving to you from my gray honda minivan:shocked:


Saw the 4runner and the color and immediately I thought of you. It is way cooler when you actually see it.

Looks like you guys had fun
 
Last edited:
I have had this in my head for a long time, cool to see it visually! [MENTION=124732]LawnDart[/MENTION], I approve this method :thumb3:



That does look like a nice set up! I crushed my magna flow tip in Moab too. Looking for options now.


Sent from my iPhone using Tapatalk
 
Here is what I did on my 4X4 LABS bumper on my 80 Series.

You're have to look at the bumper in question on your own rig to see if the exhaust could be routed through in a similar fashion...

I've even considered running it over the frame rail and straight out the side about mid body line... But again this is on my "trail rig" much harder to cut into new rigs like ours...

I'll talk to Cbi this week in person and see if they might want to try this.
 
Just passed you on I 70E going towards Grand Junction.

I was the one waving to you from my gray honda minivan:shocked:


Saw the 4runner and the color and immediately I thought of you. It is way cooler when you actually see it.

Looks like you guys are having fun

Haha. Nice! Yeah me and that white FJ convoyed all the way from Boise. Thanks for waving. It's been a looooooooong drive! The enthusiastic wave was an awesome pick me up.

Just saw you on Main Street in Ouray


2016 TR4 w/KDSS with mods and more to come....

Hit me up if you see me. I'll be tooling around in town after registration.
 
cbi recommends not using the hole in the bumper for exhaust.

they used to do it but the exhaust heat helped the powder coat come of faster.
but its always customers choice.

also if your doing a dual swing out make sure they measure twice for the lift gate clearances.

Will do. They seem to have it down pretty well but I'm driving to Idaho Falls to swap my bumpers out so they will do the install in their shop. So we will know if there's any issues. But I doubt there will be. I'll also be getting the new aluminum camp table. Which doesn't require a screw to hold in place while driving. Ball detents, baby!

What an incredible build!!! I just burned an hour and a half reading everything and taking notes.

I think you may be worse than me; I did the same thing on my last Harley build and 3 years later I am still saying "one more thing"! LOL

I'll be watching for you in P-town, I know you will be hard to miss!

Dave

Thanks man. Yeah this became an obsession. And you can't miss me. My truck looks like a giant tomato.
 
My wife and kids asked why I was waving so happily to a stranger. My daughter thought that I was being a creeper.

I explained to them that you were are a rockstar on the T4R forum and If you saw a rockstar you would wave too.

Trust me you really livened up my boring drive back from Vegas. I wasn't sleepy after that.


QUOTE=LawnDart;2417757]Haha. Nice! Yeah me and that white FJ convoyed all the way from Boise. Thanks for waving. It's been a looooooooong drive! The enthusiastic wave was an awesome pick me up.



Hit me up if you see me. I'll be tooling around in town after registration.[/QUOTE]
 
My wife and kids asked why I was waving so happily to a stranger. My daughter thought that I was being a creeper.

I explained to them that you were are a rockstar on the T4R forum and If you saw a rockstar you would wave too.

Trust me you really livened up my boring drive back from Vegas. I wasn't sleepy after that.


QUOTE=LawnDart;2417757]Haha. Nice! Yeah me and that white FJ convoyed all the way from Boise. Thanks for waving. It's been a looooooooong drive! The enthusiastic wave was an awesome pick me up.



Hit me up if you see me. I'll be tooling around in town after registration.
[/QUOTE]

It's been a great experience and the summit hasn't even started. We got into town at about 8:30 pm and got dinner. And now I'm replying to emails from my tent. Lots of awesome rigs out here. Not quite as upgraded as Rock Therapy as those are meant for crawling in Moab whereas FJ summit you can do with a stock rig on most trails.

Not a ton of 4runners. But cool seeing people who recognize the rig all the way out here. Thanks again dude. And nice TAD sticker.
 
28196237820_80c94371b9_h.jpg


27862890494_de1fdf4f3d_h.jpg


27863678813_c23c417082_h.jpg
 
who's taco is that? would like to see more, got a buddy thinks he can get away with 35's with minimal effort. he also wants a camper with full rack for a RTT. want to push him in the right direction if he's serious, cuz it ain't my money!
 
who's taco is that? would like to see more, got a buddy thinks he can get away with 35's with minimal effort. he also wants a camper with full rack for a RTT. want to push him in the right direction if he's serious, cuz it ain't my money!

Walt from Tactical Application Vehicles. And it's not as easy as it looks.
 

Members online

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Trending content

Back
Top