MadeInMaine
New member
Get a pair, if it works, it works..... if not, throw them in your fog..... and apply yellow film...
Not a bad idea....
the fog bulbs are H11s?
Get a pair, if it works, it works..... if not, throw them in your fog..... and apply yellow film...
Not a bad idea....
the fog bulbs are H11s?
Yes.
BTW, did you JUST pick up a 4Runner? LOL
Jump onto my GB to get a Gobi Roof Rack!!!!!
hey guys, just picked up my 2015 4runner trail a couple of weeks ago and already bummed by the light situation.
i added morimoto ? LED fogs today and want to know if i should get the x11 extreme for the lo beams . i also want to know what the best scenario for high beam is .
thanks in advance
hoping "Made_in_maine" will test out the 9005 XB LED (Morimoto XB LED headlight bulbs CREE) for the high, and we will see.
I am getting 9005s for high beams and H11s for the lows, so once they come, I will post pictures as soon as they come.
Unfortunately, it won't be until April or early may because they are backordered.
what is the x11 extreme?
personally, I would do the morimoto HID system for the lo beam before I will do that for the fog
i haven't figure out the high beam yet, hoping "Made_in_maine" will test out the 9005 XB LED (Morimoto XB LED headlight bulbs CREE) for the high, and we will see.
you think the LED will be as bright as the hid?
Depending on which ones. Some are, some arent.
The XB LED that TRS is offering is "not" as bright as their HID:
Morimoto XB LED headlight bulbs CREE
Some of VLEDS's, actually are brighter than HID:
9005 H10 9145 LMZ 45W 4500LM ULTRA OUTPUT LED HEADLIGHTS - 9005 9145 H10 HB3 - LED Headlights
do you think the VLEDs have the same quality as the morimoto ones?
i want to pull the trigger today and i planned originally to buy the HID set up because i have a 55watt set up on my LX450 with projector mod and i love them . the 4runner is a lease so i want to not mod anything , i would love to just get bulbs and swap them out.
thanks again for any advice.
VELDS seems to be a respectable vendor with products of the similar quality as TRS and XenonDepot.
i think im going to wuus out and get the hids , im also worried that in cold weather the covers could freeze from no heat .
i was talking about the lo beam.This is for the low beam? or the high beam?
you think the LED will be as bright as the hid?
Quick question:
Is quick swapping OEM halogen headlights for these blazing bright LEDs in OEM reflectors as bad an idea as swapping for HIDs?
In other words, will they blind all other drivers with terrible light spread? Or are LED headlight swaps somehow immune from HID headlight swap problems?
How have people dealt with this, swap for projectors like custom HID swaps have done?
Bad idea! Tried it. VLEDS website said it would work well in a halogen housing. I don't remember their exact words but i guess it worked. It lit up but that's about it. It had no cutoff, terrible focus and was just totally unacceptable. Some have used them in a projector with pretty good results.