Ya! Rock those Hankook's! Lookin good man, and congrats on the baby! Mine is 2 months old now.Ok finally got my lift (not the one I truly wanted but just found out am having a baby so I had to save a little bit right now) ...3"toytec spacer lift, 1.5" 4 crawler body lift, 1.25" spidertrax wheel spacers, 285 70/17 hankook dynapros sitting on my factory rims..
Ya! Rock those Hankook's! Lookin good man, and congrats on the baby! Mine is 2 months old now.
I've had them in mud and sand, always surprised. They have also gripped very well on hard packed dirt. I've climbed hills I couldn't get more than 1/3 of the way up with my bfg ko's with ease, especially sandy climbs. The first time I went in mud I let off the throttle thinking I broke something. It was the mud hitting the fender liners! Lol. My buddy has a lifted bronco with 35" swampers sx, he's so impressed with my tires he plans on getting them too.Thank you ya I love the way through runner turned out...I haven't taken them off road yet but am excited to..and ya it's crazy we found out on Thanksgiving it was like surprise haha
I've had them in mud and sand, always surprised. They have also gripped very well on hard packed dirt. I've climbed hills I couldn't get more than 1/3 of the way up with my bfg ko's with ease, especially sandy climbs. The first time I went in mud I let off the throttle thinking I broke something. It was the mud hitting the fender liners! Lol. My buddy has a lifted bronco with 35" swampers sx, he's so impressed with my tires he plans on getting them too.
Craigslist, eBay, local Facebook buy, sell and trade page. Those are what I'd try first. Took me a couple months to sell my old tires. Be patient.That's awesome...ya I won't have a day off for another week or two then I plan on going and trying them out haha
I have 2 of my old (new) tires I wanna get rid of but don't know how...they are the Dunlap at20 265/65r17 and I just bought them maybe 1k miles ago if that...they still have the nubs on the tires so I hate throwing them out I know someone could use them any suggestions?
While talking to a local shop about doing a lift, they recommended that I replace the u-joints ... saying that otherwise high mileage rigs would develop a driveline vibration (typically somewhere between 500-5000 miles after the lift is done). I was thinking "that's the first I've heard of that" and then your post pops up ...Since I installed my lift (see sig) , I have been getting a driveline vibration between 20-40 MPH. Above that it is smooth. The first thing I did was grease the driveshaft, and that didn't help. I'm thinking it has to do with the change in CV angles. Would a diff drop help? Total lift gained was around 3".
I have almost 40k on mine after lift. The only vibration I have had is my non-hub-centric wheel spacers. (don't buy those btw)While talking to a local shop about doing a lift, they recommended that I replace the u-joints ... saying that otherwise high mileage rigs would develop a driveline vibration (typically somewhere between 500-5000 miles after the lift is done). I was thinking "that's the first I've heard of that" and then your post pops up ...
I have almost 40k on mine after lift. The only vibration I have had is my non-hub-centric wheel spacers. (don't buy those btw)
With that said, u-joints are cheap and easy to replace if needed.
161k-ish. I'm at 202k now. Been lifted for almost 2 years.Thanks ... how many miles did you have on yours at the time of the lift?
1. 3" OME 885/895 Medium Suspension Lift
2. 285/75/16 BFG A/T KOs on Pro Comp Alloys w/ 1.25" Spidertrax all around.
3. Love the results. Can't think of anything I'd do differently.
![]()
![]()
While talking to a local shop about doing a lift, they recommended that I replace the u-joints ... saying that otherwise high mileage rigs would develop a driveline vibration (typically somewhere between 500-5000 miles after the lift is done). I was thinking "that's the first I've heard of that" and then your post pops up ...
Ok finally got my lift (not the one I truly wanted but just found out am having a baby so I had to save a little bit right now) ...3"toytec spacer lift, 1.5" 4 crawler body lift, 1.25" spidertrax wheel spacers, 285 70/17 hankook dynapros sitting on my factory rims..
Like the look of this a lot. Thinking of going with a similar OME package. Leaning more towards the 884/895 package.
Going to go one tire size up to 265/70/17 (from 265/65/17) after the suspension work is done.
This is probably a dumb question...but what are the 1.25 Spidertrax spacers for. I am assuming to give your vehicle a wider stance/look?
Are they necessary or advisable if I am sticking with the stock tire width of 265?
Hankook dynapro atm. You'll thank me later.Thanks for that AX07Runner, that makes sense. I like the looks of your set up. I plan to go with something similar except OME shocks instead of the 5100s.
How do you like the Cooper AT3's? We have had them for about 50,000miles in 265/65/70.
I would rate them as nice on the highway for an A/T, pretty decent off road in the muck. Not so good in the rain and in snow/slush.
I would give them an 8.5/10 overall. Like them but would not buy again. Next time around gonna do with the BFG AT KO2 or Duratracs.