So finally decided to get BFG KO 265/70/17 :lock1:, replacing Nitto TG's which gave me about 58k miles. These are certainly 'luggier' and look better. I went with load range C which works for me as this does not get heavy off-roading.
Satoshi Mod next
Questions...
What are the biggest tires people have fit with FJ springs (all 4), and the 2.5 inch Daystar lift?
Do the 1.25 spidertrax spacers allow for any increase?
Whats the biggest tire that will fit in the spare compartment?
Thanks runners.
Has anyone had any rubbing with this setup? Today I noticed some rubbing while backing up to the left. It's rubbing the bottom part of the front plastic.
Nice trd wheels. Sharp ride2" suspension
2"body lift
33x11.50's
2" suspension
2"body lift
33x11.50's
2" suspension
2"body lift
33x11.50's
I've been lurking this forum since I bought her. First time posting pics...
-2008 4x4 Sport V6 (original owner w/ 110,000+ miles)
-Bilstein 6112s up front (highest setting)
-Bilstein 5100s w/ SAW 1.5 springs in the back
-17 in. Matte Gunmetal FN f(x) Pro wheels
-265/65/17 Michelin's transferred over from stock wheels. I'll upsize the tires once I wear the tread out on these donuts.
View attachment 208479View attachment 208480
Thanks! I love them. FN carries the TRD and plain black caps for now. In the middle of July, Dustin (the owner) said they're going to have FNW caps available. He showed me the prototypes, and they look pretty good. I was on the fence between these and the oem ones too. I mostly chose these because I liked how they were just the right offset to get the tires to sit flush with the fender without spacers. I also liked that they seemed a bit more concave, were wider, and had a flush center cap area.How do you like the FN wheels? I am back and forth between factory TRD pros and the FN wheel. Not crazy about the FN center cap, but also not crazy about the 7" wide factory wheel or the fact I can't get it in bronze. Look great on your truck by the way.
Thanks! I love them. FN carries the TRD and plain black caps for now. In the middle of July, Dustin (the owner) said they're going to have FNW caps available. He showed me the prototypes, and they look pretty good. I was on the fence between these and the oem ones too. I mostly chose these because I liked how they were just the right offset to get the tires to sit flush with the fender without spacers. I also liked that they seemed a bit more concave, were wider, and had a flush center cap area.
Miley was sitting pretty
![]()
2003 SR5 4runner
3inch Rough Country lift
285/75/17 Dunlop Fierce Attitude
FJ Wheels
Offroad Adventures Roof Rack
Yep. I'm not sure if they will cost extra though.FNW caps? Sounds interesting, are they a different option rather than the plain caps?