Lift and Tire Central (pics)... Post 'em Up!

[4Runner8]

colemanfu i really like the stance that the heavy OME gives your runner. it looks really tall to me

 

[Casper421]

Took this pix after a dirt bike(KTM 6403) trip to Ocala National Forest this past week. I have the OME hd rear springs as well as air bags. Nice stance for having almost 300lb hanging off the back.

And a pix from a camp out at the beach last week at Gamble Rodgers at Flagler Beach. Not as much wt on the back with the little camp bike (TW200).

First off, I love the stance on your rig!! Secondly, the table on your hitch carrier is ****in sweet!!:cheers: Is that custom? Finally, im very jealous of your bike's! I have a 94 Suzuki rm250 but would love to take that KTM for a ride!! :zoom: I bet that little tm200 is a lot of fun on tough trails!! Heres a pic with my bike off the carrier. Ive got stock XREAS and the carrier drags on every change in incline/decline! Cant wait till i get my lift! :biggrin2:

 

[Flexus]

no offense but the gx is just not a good looking car lifted. i dunno why. it just sits too high kinda like the landrover discovery.

Most trucks don't with stock size tires. I've got some Kumho KL61s on order to fill out the wheel wheels.

The running boards have got to go for some sliders. I'll probably build some. Don't tell the wife.
I think they can look good lifted if done right but everyone has their taste.

 

[DEUCE]

Hey AZOutlaw, where did you get you lift installed. I am also in AZ and need a good place that can install a ToyTec spacer lift on my Sport Edition and I want to keep the XREAS for now...

 

[Casper421]

ToyTec spacer lift on my Sport Edition and I want to keep the XREAS for now...

Im considering the same set up, XREAS and all. :biggrin2: Are you going with the 1.5 or 2 inch rear spacer? Could you post some pics after its done?

 

[todd sandin]

were you able to keep the xras or remove to put lift on?
Cornfed 3/2 Lift, Michelin LTX AT/2 P275/65/18
todd

 

[DEUCE]

I am looking to get the 3/2 ToyTec spacer lift and keep the XREAS. Just need a good place in Phoenix area that knows what they are doing, to install it.

 

[Jpauly]

Just need a good place in Phoenix area that knows what they are doing, to install it.

Desert Fab Motorsports - speak with Todd or Clayton - 480-288-4213. There off the 60 and Ironwood and put my Toytec lift in. I highly recommend staying away from Desert RAT... similar names, not similar shops.

 

[TheRusski]

Will it look stupid If installing Daystart 2.5 only on the front and avoiding 1.5 in the rear? From the pictures you guys posted it looks like it has a tiny bit of a front rake with front/rear kit.?

 

[4Runner8]

yea you'll have a massive bro rake. go with 1.5'' up front tops if no rear lift.

 

[Casper421]

I am looking to get the 3/2 ToyTec spacer lift and keep the XREAS.

When you do get the lift and put it on, could you please post some pictures?

 

[TheRusski]

yea you'll have a massive bro rake. go with 1.5'' up front tops if no rear lift.

Thanks! Just got done searching and def dont want the bro rake...just going with F 2.5 and R 1.5

 

[Richierollz]

Heres my baby, just put 18" KMC XD monsters (-12mm offset) and 285-60-18 Nitto Terra Graps on her!
Had a local truck shop do the install. I did not think they where gunna rub on the body mounts, but they did!! So they had to cut back the mounts just a hair. Also they did the front bumper trim and inner wheel well mod. I would have done the bumper/wheelwell mod but just didn't have time

I'll post pics when the weather gets better or ill post them on my build thread

<a href="http://s149.photobucket.com/albums/s72/richierollz/T4RUNNER/?action=view&current=P1040006.jpg" target="_blank"><img src="http://i149.photobucket.com/albums/s72/richierollz/T4RUNNER/P1040006.jpg" border="0" alt="Photobucket"></a>

<a href="http://s149.photobucket.com/albums/s72/richierollz/T4RUNNER/?action=view&current=P1040005-1.jpg" target="_blank"><img src="http://i149.photobucket.com/albums/s72/richierollz/T4RUNNER/P1040005-1.jpg" border="0" alt="Photobucket"></a>

i'll post better pics when it stops snowing!!!!
Absolutely loving the new tires tho!!!

 

[Richierollz]

oops. It has been a while.
Daystar 2.5" , kmc monster 18"wheels, nitto tg 285/60/18
enjoy

were twins! Lol

 

[berettashot117]

new lift, wheels, tires

 

[Geländemann]

Have you tried out those new Grabbers yet? They're pretty interesting if you ask me - I probably wouldn't get them, but they're still interesting.

 

[message]

new lift, wheels, tires

Looks great! Where were you able to snag a set of the black TRD rims? Also how do you like the new General Grabbers? I'd really like a set, but not sure how good they would do here in the snow.

 

[4Runner8]

not gonna lie thats my new favorite 4runner^^ the black and red trd rims and decals and then the grabber comp red lettering. looks awesome. please get a winch bumper on there

 

[corrado]

no lift here, but i'm loving my new rubber so i figured i would share:
5 new 255/70/17 wrangler SA's

my truck before w/ stock tires

after:

after

awesome:

really happy w/ my purchase. i love the size, a little narrower for the snow, taller for the look/ride/off road, minimal weight penalty (altho they felt A LOT heavier), and more accurate MPG display reading. they feel like stock, ride smooth and are pretty good in the snow. i was hoping for better but i think 10yrs in an audi w/ snow tires has me a little jaded... enjoy

 

[berettashot117]

toytec ultimate, fj cruiser trd wheels 16" powdercoated, 285/75/r16 general grabbers