Limited Help

[Mtn.Rush]

Front Spoiler Help

For those of you guys that removed the lower plastic (front spoiler) nonscence in the front of the truck, hows the long term report (I know a couple of you did this a few months back) I spoke to the Master mod man, Antman, and he suggested to just finish it off (i smashed one of the pieces at the beach yesterday and not sure if I should just replace it or not). Im not second guessing Hackman at all, just want some more opinions. Anyone have quality pictures of it removed? And other then air flow, is it for anything else? Thanks

 

[brockeverly]

For those of you guys that removed the lower plastic (front spoiler) nonscence in the front of the truck, hows the long term report (I know a couple of you did this a few months back) I spoke to the Master mod man, Antman, and he suggested to just finish it off (i smashed one of the pieces at the beach yesterday and not sure if I should just replace it or not). Im not second guessing Hackman at all, just want some more opinions. Anyone have quality pictures of it removed? And other then air flow, is it for anything else? Thanks

I am pulling mine off. It channels air to the radiator and that is the only plus I would think. Cannot see how anyone would have any issue removing it, but I am interested in hearing what people have to say. I would do as Antman says, just take it off. It is just reduced clearance on your entrance angles :whip2:

 

[Mtn.Rush]

Damn, I thought a bunch of people did this "mod" No one has clean pic or a report of it??

 

[dognick]

I pulled mine off after the first couple guys pointed that stuff out. I haven't noticed anything different except that IMO it looks better without. Milage stayed the same, doesn't make any noise, temp never changes.

This is the best pic I have right now:

 

[brockeverly]

Damn, I thoght a buch of people did this "mod" No one has clean pic or a reort of it??

emsmatt has some photos in the middle of the lifted thread that has it removed. I will try to find it for you and link you, but I am on my phone so it may take awhile.

 

[brockeverly]

Here ya go

Found here

http://www.toyota-4runner.org/882670-post586.html

 

[Mtn.Rush]

I pulled mine off after the first couple guys pointed that stuff out. I haven't noticed anything different except that IMO it looks better without. Milage stayed the same, doesn't make any noise, temp never changes.

This is the best pic I have right now:

Thanks, looks good.

emsmatt has some photos in the middle of the lifted thread that has it removed. I will try to find it for you and link you, but I am on my phone so it may take awhile.

I found it, thank you. (ahhh ya beat me to it...thanks again)

 

[phillyd2]

Damn, I thought a bunch of people did this "mod" No one has clean pic or a report of it??

Well......you did ask for limited help....:hatsoff:

 

[Antman]

There are some pics of mine in my build thread too:

http://www.toyota-4runner.org/5th-gen-t4rs/84084-sr-5-body-kit.html#post727271

Ya know, there is a metal air scoop built into the skidplate behind all that plastic junk. Quit being such a girl and take it off!:girl:

 

[Mtn.Rush]

Well......you did ask for limited help....:hatsoff:

HAHAHA, your right.....:cheers:

 

[marcgybr]

i was about to take this out yesterday while replacing the fog bulbs.