Need a part- Question

[r3dh3ad84]

Turns out my driver side front fender decided to fall down during some freeway driving today and wore a 9 inch hole in it. Anyone know where I can get a new fender well in the AZ area?- or a possible fix? :rant: So frustrating!

 

[R8RRunner]

Is the hole in the fender liner or the fender? Just not sure by reading the post where the hole is that you're talking about. If it is the actual fender. You can get them for under $300 from partznet.com. They also have the fender liner for about $100.

 

[r3dh3ad84]

Sorry, it is the front of the fender liner- the front of the fender well plastic

 

[R8RRunner]

No worries, figured that is what you were referring to but wasn't sure.

You can get the liner on Partznet. In looking at their site again the have "fender liner" and "apron assembly". Not sure which would actually be the part you need. Might want to shoot them an email just to check since they don't have pic's with the product name. The apron assembly is almost $400 bucks but if it is just the liner that you need it'll be about $100.

 

[r3dh3ad84]

Thanks for the help man- maybe I'll figure out a way to rivet in some plastic or something- 100 for a little sheet of plastic is ridiculous