I have all 4. $10 each plus shipping, PM me that address kid
Correction, I only have 3, the pass/rear has a busted tab
just checking back in to see if you got my $$ i paypaled you(sorry it took a few days) and yeah havent heard anything so just checkin in, thanks
This is a small thing (literally) but I would like to have the small plastic cover on the parking lock release access hole.
Nope, fog switch is dash mount and missing the light coverDoes the turn signal stalk have the Fog light switch on it?
If so, what's your price?
PM'dFront end looks pretty bashed, but I'll take the fog lights and brackets if you've got 'em.
Little black cover, front-right and rear roof caps, cargo cover and rear wiper are good to go. PM'd5 spd or auto?
If auto I need the little black cover that goes over the tranny lock over-ride...
I also need all 4 roof rack caps (like the above post if that didn't work out).
How about the cargo cover?
Is the rear wiper arm in good shape?
How about the 6 clips to hold the grill in place? Are they still there and unbroken?
Looks like the rails will be in good shape. PM'dJust curious if the roof rack rails are salvageable. I don't need any part of the rack system, other than the rails that bolt on to the roof. Thanks in advance.
PS The condoms comment was hilarious. What's the story behind those?
No dice, sorryI need this switch on the side of the driver's seat:
![]()
Zip 27514
Driver's seat is mine!! My old one is tore up real bad or I'd sell it.what up with drivers seat how much
Do you want the wood pieces or the entire interior shell? PM meHow many of the tan/oak interior pieces do you have and price shipped to 23229? (on all you have)
slightly pitted but great if you want to sand down and repaint. PM me if you still want emRear gate Emblems? Thanks, Nick
I have the entire shifter. Do you need the piece with the lettering on it? PM meDo you have the plastic piece on the shifter that shows what gear the lever is in? Mine is cracked. Thanks! BTW, hi everyone, new here haha.
No struts. Get this, both upper and lower control arms are still bolted to the spindle, like fully installed with pins and all but no struts. WTF? Were they driving this thing around draging the oil pan???Do you have the top plates off the front struts? If so, are they in good shape?
No motor, trans or rear end but lots of other goodies that I have to pull then I'll scrap the remaining shell. I took a week off work so it should be pulled apart by next weekend. Let me know what you need. I'll post pics in a bit, can't post from my phone
Little black cover, front-right and rear roof caps, cargo cover and rear wiper are good to go. PM'd
No PM in inbox.