New Nitto's installed

RonMAIDEN said:
How many people do run their tires at 40psi? I run my Nittos at 35psi and I don't have any wear issues. If you di run 40psi you'd start wearing in the middle much quicker but it is just good to pay attention to your wear and adjust pressure accordingly. I ran 32psi in my Nittos when I first got them and they seemed a little flat looking and I was getting wear on the edges more than I liked but 35 seems to be about rght for my truck.
Click to expand...

Thanks for the first hand advice on Nitto's. I'll take your word for it since you have already experimented.
 
I've find that 35 psi is perfect. 32 feels a touch better but my mileage suffered. 40 was painful. 35 seems to be the sweet spot for the Nittos.
 
MAC4Runner said:
I've find that 35 psi is perfect. 32 feels a touch better but my mileage suffered. 40 was painful. 35 seems to be the sweet spot for the Nittos.
Click to expand...

How long have you had yours on so far? How's the tread wear?
 
josh220 said:
How long have you had yours on so far? How's the tread wear?
Click to expand...

A little over 25,000. Treadwear looks good. I expect at least 40,000 out of them.

Did I mention they're a GREAT tire! :biggrin2:
 
MAC4Runner said:
A little over 25,000. Treadwear looks good. I expect at least 40,000 out of them.

Did I mention they're a GREAT tire! :biggrin2:
Click to expand...

I love them so far. I missed the rain here by 2 days, so I haven't tried them out on anything except dry pavement so far. Nitto's don't have a mileage expectancy like other tires do, so it's encouraging to see them still going strong after 25k.
 
they look great man... I like the black wall out.. It makes me wanna turn my white letters in... I think I will do that next time i get them balanced
 
Josh,
Nice to see the lift with the rear done. It looks good! Don't worry about missing the rain, the mold release compound takes a bit to scrub off anyway, so the experience wouldn't have been optimal for the first few miles.

Everyone,
I run my stock CTs at 40 psi, I think that's where Josh got it from... Center tire wear shouldn't be an issue as long as you have full tread width on the contact patch. I've always run my tires at max psi on my trucks, and verify that I'm getting full width by driving over a wet spot and observing the tread pattern. I remove air to get the full width. I've never had an issue with excessive centre wear on my tires. I perfer my suspension a bit on the stiff side... personal prefrence YMMV.

Sean
 
mikehinthehouse said:
they look great man... I like the black wall out.. It makes me wanna turn my white letters in... I think I will do that next time i get them balanced
Click to expand...
I had it easy, because it was black writing on both sides. I just had to pick whether I wanted the solid or lined lettering facing out.


SConnors said:
Josh,
Nice to see the lift with the rear done. It looks good! Don't worry about missing the rain, the mold release compound takes a bit to scrub off anyway, so the experience wouldn't have been optimal for the first few miles.

Everyone,
I run my stock CTs at 40 psi, I think that's where Josh got it from... Center tire wear shouldn't be an issue as long as you have full tread width on the contact patch. I've always run my tires at max psi on my trucks, and verify that I'm getting full width by driving over a wet spot and observing the tread pattern. I remove air to get the full width. I've never had an issue with excessive centre wear on my tires. I perfer my suspension a bit on the stiff side... personal prefrence YMMV.

Sean
Click to expand...

Thanks, and I have heard it from numerous people on here about running their tires at 38-40psi so don't hold yourself responsible.
 
You must log in or register to reply here.

Members online

Total: 393 (members: 2, guests: 391)

Forum statistics

Threads
278,309
Messages
3,554,075
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top